54-00130

9.15 1 13.6 2 10.8 7.7 3 0.8x3.5 B 4.7 A 0.8x2.5 4 A 6 C Ø5.5 P.C.B. Layout B SECTION A-A C Mating Plug 3.5 1 A A B 14.4 5 Ø2.5 C Schematic 9 1.7 1 6.5 14.5 10.8 6.3 7.55 1 0.36 0.3 2 A 10.8 4.7 Revision: Date: Description: A 9/26/2018 Initial release Prepared: AW Digitally signed by AW Date: 2018.09.27 13:02:45 -07'00' Verified: JP 1.4 2 3 2.8 Notes: Function test: no open, no short circuit, no intermittent tel fax Digitally signed by JP Date: 2018.09.27 13:52:17 -07'00' Dimensions are in millimeters. Description: Tolerances: Connector, dc jack 5.5x2.5 mm, PCB mount, 90°, 0.1 mm < 1.0: 1.0 to 10.0: 0.2 mm silver plated, thru hole > 10.0: 0.3 mm 5 4 3 Size: Part number: A 54-00130 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 4:1 Sheet 1 of 2 1 Ratings Maximum operating voltage: 48 V Maximum operating current: 6.5 A (not mated under load) Operating Temperature Range -25 ~ 85 °C, relative humidity of 85% or less Materials 1 Insulator: PBT, black 2 Cover: PBT, black 3 Center Pin: copper alloy, nickel plated 4 Spring contact: phosphor bronze, silver plated 5 Terminal: brass, silver plated 6 Terminal: brass, silver plated Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc minimum Contact resistance: 50 mΩ maximum Mechanical Requirements Insertion force: 0.3-1.3 kgf Withdrawal force: 0.3-1.5 kgf Life cycle: 5000 mating cycles while maintaining contact resistance: 100 mΩ maximum, withstand voltage: 500 Vac, 1 min Terminal strength: 300 gf applied to the terminal for 15 seconds in any direction while maintaining electrical characteristics and without damage or excessive looseness of terminals Soldering Solderability: 75% minimum coverage when terminals dipped 2mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board 1.6 mm for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Environmental Requirements Cold test: -25 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C, relative humidity 45-85% for 48 hours without deformation Humidity test: 40 ±2 °C, relative humidity 90-95% for 48 hours without deformation Wave Soldering Temperature Profile Temperature (°C) Pb - Free Flow Profile Solder temperature: 245 °C Time: 5 seconds maximum Pre-heat: 100 ~120°C Time: 70 seconds maximum Measure point: surface of the solder leads 245 °C peak (5 seconds max) 120 °C 100 °C Pre-heat 70 seconds (max) Time (S) Revision: A Date: 9/26/2018 Description: Initial release Prepared: AW Notes: Digitally signed by AW Date: 2018.09.27 13:03:00 -07'00' Verified: JP Function test: no open, no short circuit, no intermittent tel fax Digitally signed by JP Date: 2018.09.27 13:52:04 -07'00' Dimensions are in millimeters. Description: Tolerances: Connector, dc jack 5.5x2.5 mm, PCB mount, 90°, 0.1 mm < 1.0: 1.0 to 10.0: 0.2 mm silver plated, thru hole > 10.0: 0.3 mm 5 4 3 Size: Part number: A 54-00130 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Sheet 2 of 2 1:1 1