54-00164

Ø5.5 Ø2.1 A C B Mating Plug Schematic 14.7 11.2 ±0.20 CL 5 ±0.2 CL 9.1 11.2 CL 2 (x4) CL 1.5 9 CL B 5 14.7 ±0.20 13.4 10.8 SECTION A-A 9 1 .8 1.5 TYP 1.7 A A 1. 6 13 12.5 ±0.30 A C 2 4.5 Soldering pads P.C.B. Layout 2 A 5 Revision: A Date: 07/03/2019 Description: Initial release CL 4.5 Prepared: GL Verified: AW 1.2 3.4 6.5 11 6. 4 CL Notes: Digitally signed by GL Date: 2019.07.03 09:45:19 -07'00' Digitally signed by AW Date: 2019.07.03 10:08:43 -07'00' RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Dimensions are in millimeters. Description: Tolerances: Connector, dc jack 5.5x2.1 mm, PCB mount, 90°, 0.1 mm < 1.0: 1.0 to 10.0: 0.2 mm silver plated, PA9T, SMT > 10.0: 0.3 mm 5 4 3 Size: Part number: A 54-00164 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 3:1 Sheet 1 of 3 1 Ratings Maximum operating voltage: 48 V Maximum operating current: 5.5 A (not mated under load) Operating Temperature Range 20°C to 70°C, relative humidity of 85% or less Materials 1 Insulator: PA9T, black black 2 Cover: PA9T, black 3 Center Pin: copper alloy, nickel plated 4 Terminal: brass, silver plated 5 Spring contact: phosphor bronze, silver plated Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 250 Vdc minimum Contact resistance: 30 mΩ maximum Mechanical Requirements Insertion force: 0.3-3.0 kgf Withdrawal force: 0.3-3.0 kgf Life cycle: 5000 mating cycles while maintaining contact resistance: 100 mΩ maximum, withstand voltage: 500 Vac, 1 min Terminal strength: 500 gf applied to the terminal for 60 seconds in any direction while maintaining electrical characteristics and without damage or excessive looseness of terminals Soldering Solderability: 90% minimum coverage when terminals dipped 2mm in 260 ±5 °C solder bath for 3 ±0.5 seconds Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Environmental Requirements Cold test: -40 ±2 °C for 48 hours without deformation while maintaining contact resistance: 50 mΩ maximum, insulation resistance: 100 MΩ @ 250 Vdc minimum, and no sign of damage mechanically or electrically Heat test: 85 ±2 °C, relative humidity 45-85% for 48 hours while maintaining contact resistance: 50 mΩ maximum, insulation resistance: 100 MΩ @ 250 Vdc minimum, and no sign of damage mechanically or electrically Humidity test: 40 ±2 °C, relative humidity 90-95% for 48 hours while maintaining contact resistance: 50 mΩ maximum, insulation resistance: 100 MΩ @ 250 Vdc minimum, and no sign of damage mechanically or electrically Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Reflow Soldering Temperature Profile Solder conditions vary depending on reflow soldering equipment. Temperature (°C) 300 Pb - Free Flow Profile 265 °C 255 °C 200 180 °C Max: 10 s 100 The surface temperature of the jack must not exceed 265 °C. 6 min Time (S) Revision: A Date: 07/03/2019 Description: Notes: Prepared: GL Initial release Verified: AW Digitally signed by GL Date: 2019.07.03 09:45:36 -07'00' Digitally signed by AW Date: 2019.07.03 10:08:57 -07'00' RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Dimensions are in millimeters. Description: Tolerances: Connector, dc jack 5.5x2.1 mm, PCB mount, 90°, < 1.0: 0.1 mm 1.0 to 10.0: 0.2 mm silver plated, PA9T, SMT > 10.0: 0.3 mm 5 4 3 Size: Part number: A 54-00164 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Sheet 2 of 3 1:1 1 28.8 26.5 13.1 1.5 0.5 24 CL Ø330 2 120 20 11.5 4 .2 14 Not to scale Not to scale Packaging details: 24 m per reel 250 pcs. per reel Revision: A Date: 07/03/2019 Description: Prepared: GL Initial release Verified: AW Notes: Digitally signed by GL Date: 2019.07.03 09:45:54 -07'00' RoHS compliant Digitally signed by AW Date: 2019.07.03 10:09:09 -07'00' Function test: no open, no short circuit, no intermittent tel fax Dimensions are in millimeters. Description: Tolerances: Connector, dc jack 5.5x2.1 mm, PCB mount, 90°, 0.1 mm < 1.0: 1.0 to 10.0: 0.2 mm silver plated, PA9T, SMT > 10.0: 0.3 mm 5 4 3 Size: Part number: A 54-00164 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Sheet 3 of 3 5:1 1