55-00050

Materials Connector: 50-00590 1 Insulator, PBT + 15% glass fiber, UL94 V-0, black 2 Shell, H65, nickel plated 3 Tray, C3602, nickel plated 4 Center contact, C5191 phosphor bronze, nickel plated 5 Ground contact, brass, nickel plated Inner Sleeve: 56-00002 6 Inner sleeve, Nylon UL 94V-0 Connector 4 Outer Sleeve: 56-00003 7 Outer sleeve, TPU, black Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less Inner Sleeve Outer Sleeve 1.75x2 7.93 Mechanical requirements Insertion force: 0.3~3 kgf Withdrawal force: 0.3~3 kgf Durability: 5000 mating cycles while maintaining; 0.3~3 kgf insertion force, 0.3~3 kgf withdrawal force and a less than 100 mΩ contact resistance. 1.75 Unassembled view 62 12 11.2 A 5 3 7 1.7 6 A 2 4 1 SECTION A-A 2.4 +0.05 5.5 0 2. 5 0.85 11 Environmental requirements Cold test: -25 ±3 °C for 48 hours without deformation Heat test: 70 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 96 hours without deformation Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical and electrical requirements. Assembled view Revision: Date: Description: A2 11/2/2016 Updated materials A3 3/8/2017 Changed length, diameter, design A4 7/14/2017 Changed inner sleeve design A5 8/22/2017 Changed connector P/N A6 4/9/2018 Updated curent rating 5 Prepared: JC Verified: AG Digitally signed by JC Date: 2022.01.27 13:42:07 -08'00' Digitally signed by AG Date: 2022.01.27 13:56:05 -08'00' Dimensions are in millimeters. Tolerances: 0.5 mm X: 0.3 mm X.X: X.XX: 0.05 mm 4 Ø2.4 - 5.0 mm wire Cut strain relief to match wire Ø Notes: RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, 5.5x2.5xL12 mm dc plug, nickel plated, assembly type, spring contacts 3 2 1.541.323.3228 800 877.670.7118 1.541.323.4202 web tensility.com Size: Part number: A 55-00050 Scale: 1:1 Sheet 1 of 2 1 Ratings Rated voltage: 48 V Rated current: 6 A Operating range -25 to 90°C, relative humidity of 85% or less Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: Date: Description: A2 11/2/2016 Updated materials A3 3/8/2017 Changed length, diameter, design A4 7/14/2017 Changed inner sleeve design A5 8/22/2017 Changed connector P/N A6 4/9/2018 Updated curent rating 5 Prepared: JC Digitally signed by JC Date: 2022.01.27 13:55:37 -08'00' Verified: AG Digitally signed by AG Date: 2022.01.27 13:56:30 -08'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 4 Notes: RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, 5.5x2.5xL12 mm dc plug, nickel plated, assembly type, spring contacts 3 2 1.541.323.3228 800 877.670.7118 1.541.323.4202 web tensility.com Size: Part number: A 55-00050 Scale: 1:1 Sheet 2 of 2 1