109D
www.vishay.com
Vishay
Wet Tantalum Capacitors Sintered Anode TANTALEX™ Capacitors
for Operation to +125 °C, Elastomer-Sealed
FEATURES
• Axial through-hole terminations: standard tin /
lead (SnPb), 100 % tin (RoHS-compliant)
Available
available
• Vishay Sprague model 109D tubular
Available
elastomer-sealed, sintered anode TANTALEX
capacitors fill the basic requirements for
applications where a superior quality, reliable
design for industrial, automotive and
Available
telecommunications application is desired
• Model 109D capacitors are the commercial
equivalents of Tansitor style WC, UWC, Mallory-NACC
style TLS, TLH and the military style CL64 and CL65,
designed to meet the performance requirements of
military specification MIL-DTL-3965
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
3D 3D
3D Models
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Following the life test:
1. DCL shall not exceed the initial requirements or 1 μA,
whichever is greater.
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 %, ± 5 % available as special.
2. The ESR shall meet the initial requirement.
DC Leakage Current (DCL max.):
at +25 °C, +85 °C, +125 °C: leakage current shall not exceed
the values listed in the Standard Ratings tables.
Life Test: capacitors are capable of withstanding a
2000 h life test at a temperature of +85 °C or +125 °C at the
applicable DC working voltage.
3. Change in capacitance shall not exceed 10 % from the
initial measurement. For capacitors with voltage ratings
of 15 VDC and below, change in capacitance shall not
exceed + 10 %, - 25 % from the initial measurement.
ORDERING INFORMATION
109D
207
X0
006
C
0
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
STYLE NUMBER
RoHS-COMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third is
the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
special order
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
0 = no outer sleeve
Standard
2 = outer plastic film
insulation
E3 = 100 % tin
termination
(RoHS-compliant)
Blank = SnPb
termination
(standard design)
Note
• Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight
Revision: 11-Jan-2022
Document Number: 40023
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
0.250 [6.35]
max.
0.025 [0.635] dia. (no. 22 AWG)
tinned solderable leads
L
-
+
WITH PLASTIC-FILM
INSULATING SLEEVE
BARE TUBE
CASE
CODE
D
D
L
LEAD LENGTH
L (1)
D MAX.
C
0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 / - 0.016 [11.51 + 0.79 / - 0.41] 0.219 [5.56]
0.608 [15.45] 1.500 ± 0.250 [38.10 ± 6.35]
F
0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 / - 0.016 [16.28 + 0.79 / - 0.41] 0.312 [7.92]
0.796 [20.22] 2.250 ± 0.250 [57.15 ± 6.35]
T
0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 / - 0.016 [19.46 + 0.79 / - 0.41] 0.406 [10.31] 0.921 [23.40] 2.250 ± 0.250 [57.15 ± 6.35]
K (2)
0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 / - 0.016 [26.97 + 0.79 / - 0.41] 0.406 [10.31] 1.217 [30.91] 2.250 ± 0.250 [57.15 ± 6.35]
Notes
(1) For reference only
(2) Replaces previous W case
RATINGS AND CASE CODES (Standard)
μF
6V
8V
10 V
15 V
20 V
25 V
30 V
35 V
50 V
60 V
75 V
100 V
1.7
150 V
C
C
C
2.5
3.0
C
C
C
3.5
3.6
C
4.0
C
4.5
C
4.7
C
5.0
C
6.8
C
7.0
C
8.0
C
8.2
F
C
9.0
F
10
C
C
F
11
F
F
F
13
14
F
15
C
C
F
18
T
20
C
22
C
25
C
F
C
F
F
F
27
30
125 V
C
F
T
C
C
T
33
C
F
39
F
F
40
T
T
43
T
47
C
50
F
F
56
T
C
60
T
K
T
Revision: 11-Jan-2022
Document Number: 40023
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
RATINGS AND CASE CODES (Standard)
μF
6V
68
C
8V
10 V
70
15 V
20 V
25 V
30 V
35 V
F
F
50 V
60 V
75 V
100 V
125 V
150 V
T
F
82
T
86
K
100
F
F/T
T
110
K
120
140
F
T
F
K
150
T
160
K
170
T
180
F
220
T
F
250
T
F
T
270
F
290
T
T
K
T
300
330
K
T
350
K
390
T
430
T
540
560
K
T
750
K
850
1200
K
K
RATINGS AND CASE CODES (Extended)
μF
2.0
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
86
100
110
120
140
150
160
6V
8V
10 V
15 V
20 V
25 V
30 V
35 V
50 V
60 V
75 V
100 V
C
125 V
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
F
C
F
F
C
F
F
C
F
C
F
T
T
F
T
T
K
K
T
C
C
F
T
C
F
F
C
Revision: 11-Jan-2022
K
T
C
F
T
Document Number: 40023
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
RATINGS AND CASE CODES (Extended)
μF
180
200
220
250
270
330
350
390
470
510
540
560
680
750
820
1000
1200
1500
1800
2200
6V
8V
C
10 V
15 V
20 V
25 V
F
F
F
F
30 V
F
35 V
F
T
T
T
K
F
F
50 V
T
60 V
T
75 V
T
T
K
K
K
100 V
125 V
T
F
F
F
F
T
T
T
K
T
T
F
T
K
K
F
F
T
T/K
K
T
K
T/K
K
K
K
STANDARD RATINGS
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT +25 °C AT -55 °C
CAPACITANCE CASE
(1)
PART NUMBER
CODE
120 Hz
120 Hz
(μF)
+85 °C
+25 °C
(Ω)
(Ω)
+125 °C
30
68
140
270
290
330
560
1200
C
C
F
F
T
T
T
K
109D306X0006C0
109D686X0006C0
109D147X0006F0
109D277X0006F0
109D297X0006T0
109D337X0006T0
109D567X0006T0
109D128X0006K0
22
25
56
220
290
430
850
C
C
C
F
T
T
K
109D226X0008C0
109D256X0008C0
109D566X0008C0
109D227X0008F0
109D297X0008T0
109D437X0008T0
109D857X0008K0
20
47
100
180
250
390
750
C
C
F
F
T
T
K
109D206X0010C0
109D476X0010C0
109D107X0010F0
109D187X0010F0
109D257X0010T0
109D397X0010T0
109D757X0010K0
6 VDC AT +85 °C; 7 VDC AT +125 °C
4.2
100
1.0
2.0
4.0
60
1.0
2.0
2.0
40
1.0
3.0
4.0
25
1.0
7.0
2.0
24
2.0
7.0
2.1
20
2.0
7.9
3.0
25
2.0
13
1.6
20
3.0
14
8 VDC AT +85 °C; 5 VDC AT +125 °C
6.0
115
1.0
2.0
4.2
100
1.0
2.0
4.0
59
1.0
2.0
4.0
30
1.0
7.0
2.0
24
2.0
9.5
3.2
25
2.0
14
1.0
22
4.0
16
10 VDC AT +85 °C; 7 VDC AT +125 °C
5.0
175
1.0
2.0
5.0
100
1.0
2.0
2.1
60
1.0
4.0
4.0
40
1.0
7.0
2.0
30
2.0
10
3.0
25
2.0
16
1.0
23
4.0
16
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
-55 °C
+85 °C
+125 °C
-40
-40
-40
-44
-70
-44
-64
-80
+10.5
+14
+14
+17.5
+20
+14
+17.5
+25
+12
+16
+16
+20
+20
+16
+20
+25
140
160
330
270
410
410
340
530
-40
-40
-40
-44
-70
-64
-80
+10.5
+10.5
+14
+17.5
+20
+17.5
+25
+12
+12
+16
+20
+20
+20
+25
130
140
160
270
410
410
670
-32
-36
-36
-36
-40
-64
-80
+10.5
+14
+14
+14
+14
+17.5
+25
+12
+16
+16
+16
+16
+20
+25
140
160
270
270
410
340
670
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
Revision: 11-Jan-2022
Document Number: 40023
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
STANDARD RATINGS
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT
-55
°C
AT
+25
°C
CAPACITANCE CASE
PART NUMBER (1)
CODE
120 Hz
120 Hz
(μF)
+85 °C
+25 °C +125 °C
(Ω)
(Ω)
MAX. CAPACITANCE
CHANGE (%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
15 VDC AT +85 °C; 10 VDC AT +125 °C
15
C
109D156X0015C0
6.0
155
1.0
2.0
-24
+10.5
+12
130
33
C
109D336X0015C0
5.0
90
1.0
2.0
-28
+14
+16
160
70
F
109D706X0015F0
3.6
75
1.0
4.0
-28
+14
+16
270
120
F
109D127X0015F0
4.0
50
1.0
7.0
-28
+17.5
+20
270
270
T
109D277X0015T0
3.0
30
2.0
16
-56
+17.5
+20
340
540
K
109D547X0015K0
1.2
23
6.0
24
-80
+25
+25
610
20 VDC AT +85 °C; 13 VDC AT +125 °C
27
C
109D276X0020C0
5.0
100
1.0
2.0
-20
+11
+14
160
220
T
109D227X0020T0
4.0
3
2.0
16
-48
+13
+15
410
10
C
109D106X0025C0
6.0
220
1.0
2.0
-16
+8
+9
130
22
C
109D226X0025C0
5.0
140
1.0
3.0
-20
+10.5
+12
160
25 VDC AT +85 °C; 15 VDC AT +125 °C
50
F
109D506X0025F0
4.0
70
1.0
5.0
-28
+13
+15
270
100
F
109D107X0025F0
4.0
50
1.0
10
-28
+13
+15
270
100
T
109D107X0025T0
4.0
45
2.0
10
-48
+13
+15
410
180
T
109D187X0025T0
4.0
32
2.0
18
-48
+13
+15
340
220
F
109D227X0025F0
2.6
36
3.2
16
-60
+13
+16
300
350
K
109D357X0025K0
1.3
24
7.0
28
-70
+25
+25
580
110
30 VDC AT +85 °C; 20 VDC AT +125 °C
7.0
C
109D705X0030C0
8.0
275
1.0
2.0
-16
+8
+12
8.0
C
109D805X0030C0
7.5
275
1.0
2.0
-16
+8
+12
130
15
C
109D156X0030C0
8.0
175
1.0
2.0
-20
+10.5
+12
160
40
F
109D406X0030F0
4.0
65
1.0
5.0
-24
+10.5
+12
270
68
F
109D686X0030F0
6.0
60
1.0
8.0
-24
+13
+15
270
100
T
109D107X0030T0
6.0
40
2.0
12
-28
+10.5
+12
410
150
T
109D157X0030T0
4.1
35
2.0
18
-48
+13
+15
340
300
K
109D307X0030K0
1.6
25
8.0
32
-60
+25
+25
550
35 VDC AT +85 °C; 22 VDC AT +125 °C
68
F
109D686X0035F0
6.0
60
1.0
8
-24
+12
+15
270
120
T
109D127X0035T0
4.0
38
2.0
16
-30
+13
+15
410
270
K
109D277X0035K0
2.2
23
8.0
32
-45
+20
+25
500
4.5
C
109D455X0050C0
9.0
400
1.0
2.0
-16
+5
+6
110
5.0
C
109D505X0050C0
9.0
400
1.0
2.0
-16
+5
+6
130
10
C
109D106X0050C0
8.0
250
1.0
2.0
-24
+8
+9
160
22
F
109D226X0050F0
7.0
95
1.0
4.0
-20
+10.5
+12
230
25
F
109D256X0050F0
6.0
95
1.0
5.0
-20
+10.5
+12
270
47
F
109D476X0050F0
6.0
70
1.0
9.0
-28
+13
+15
270
60
T
109D606X0050T0
3.0
45
2.0
12
-16
+10.5
+12
410
82
T
109D826X0050T0
4.0
45
2.0
16
-32
+13
+15
340
160
K
109D167X0050K0
2.2
27
8.0
32
-50
+25
+25
460
50 VDC AT +85 °C; 30 VDC AT +125 °C
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
Revision: 11-Jan-2022
Document Number: 40023
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
STANDARD RATINGS
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT
-55
°C
AT
+25
°C
CAPACITANCE CASE
PART NUMBER (1)
CODE
120 Hz
120 Hz
(μF)
+85 °C
+25 °C +125 °C
(Ω)
(Ω)
MAX. CAPACITANCE
CHANGE (%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
60 VDC AT +85 °C; 40 VDC AT +125 °C
4.0
C
109D405X0060C0
10.0
550
1.0
2.0
-16
+5
+6
110
8.2
C
109D825X0060C0
8.0
275
1.0
2.0
-24
+8
+9
140
20
F
109D206X0060F0
5.0
105
1.0
5.0
-16
+10.5
+12
270
39
F
109D396X0060F0
7.0
90
1.0
9.0
-28
+10.5
+12
230
50
T
109D506X0060T0
4.0
50
2.0
12
-16
+10.5
+12
410
68
T
109D686X0060T0
6.0
50
2.0
16
-32
+10.5
+12
340
140
K
109D147X0060K0
2.4
28
8.0
32
-40
+20
+20
430
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5
C
109D355X0075C0
10.0
650
1.0
2.0
-16
+5
+6
110
6.8
C
109D685X0075C0
8.0
300
1.0
2.0
-20
+8
+9
140
13
F
109D136X0075F0
6.0
160
1.0
4.0
-16
+8
+9
190
15
F
109D156X0075F0
6.5
150
1.0
5.0
-16
+8
+9
270
33
F
109D336X0075F0
7.0
90
1.0
10
-24
+10.5
+15
230
40
T
109D406X0075T0
5.0
60
2.0
12
-16
+10.5
+12
410
56
T
109D566X0075T0
6.0
60
2.0
17
-28
+10.5
+15
300
110
K
109D117X0075K0
3.1
29
9.0
36
-35
+20
+20
400
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.5
C
109D255X0100C0
26.5
950
1.0
2.0
-16
+7
+8
100
3.0
C
109D305X0100C0
10.0
800
1.0
2.0
-16
+7
+8
110
4.7
C
109D475X0100C0
10.0
500
1.0
2.0
-16
+7
+8
130
10
F
109D106X0100F0
6.0
215
1.0
4.0
-16
+7
+8
190
11
F
109D116X0100F0
6.0
200
1.0
4.0
-16
+7
+8
230
22
F
109D226X0100F0
7.0
100
1.0
9.0
-16
+7
+8
230
30
T
109D306X0100T0
4.0
80
2.0
12
-16
+7
+8
340
43
T
109D436X0100T0
6.0
70
2.0
17
-20
+7
+8
300
86
K
109D866X0100K0
3.1
30
9.0
36
-25
+15
+15
400
1.7
C
109D175X0125C0
54.6
1250
1.0
2.0
-16
+7
+8
100
3.6
C
109D365X0125C0
15.0
600
1.0
2.0
-16
+7
+8
110
9.0
F
109D905X0125F0
15.0
240
1.0
5.0
-16
+7
+8
210
14
F
109D146X0125F0
12.0
167
1.0
7.0
-16
+7
+8
190
18
T
109D186X0125T0
11.0
129
2.0
9.0
-16
+7
+8
340
25
T
109D256X0125T0
10.0
93
2.0
13
-16
+7
+8
260
56
K
109D566X0125K0
4.1
3.2
10
40
-25
+15
+15
400
7
8
110
140
125 VDC AT +85 °C; 85 VDC AT +125 °C
150 VDC AT +85 °C; 100 VDC AT +125 °C
1.7
C
109D175X0150C2
42
1100
1.0
3.0
-14
3.0
C
109D305X0150C2
15
600
1.0
3.0
-14
7
10
6.8
F
109D685X0150F2
15
300
2.0
10
-14
10
12
250
11
F
109D116X0150F2
12
250
2.0
10
-14
10
12
250
22
F
109D226X0150F2
4.0
100
5.0
25
-20
12
15
250
39
T
109D396X0150T2
2.2
60
10
40
-16
14
16
400
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
Revision: 11-Jan-2022
Document Number: 40023
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
EXTENDED RATINGS
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
140
820
1500
2200
C
F
T
K
109D147X0006C2
109D827X0006F0
109D158X0006T0
109D228X0006K0
180
470
680
1800
C
F
F
K
109D187X0008C0
109D477X0008F0
109D687X0008F0
109D188X0008K0
100
120
150
390
470
560
1000
1200
1200
1500
C
C
C
F
F
F
T
K
T
K
109D107X0010C0
109D127X0010C0
109D157X0010C0
109D397X0010F0
109D477X0010F0
109D567X0010F0
109D108X0010T0
109D128X0010K0
109D128X0010T0
109D158X0010K0
68
82
100
270
330
390
510
540
820
820
1000
C
C
C
F
F
F
T
T
T
K
K
109D686X0015C0
109D826X0015C0
109D107X0015C0
109D277X0015F0
109D337X0015F0
109D397X0015F0
109D517X0015T0
109D547X0015T0
109D827X0015T0
109D827X0015K0
109D108X0015K0
56
82
220
330
C
C
F
F
109D566X0020C0
109D826X0020C0
109D227X0020F0
109D337X0020F0
47
68
180
270
350
560
680
750
C
C
F
F
T
T
K
K
109D476X0025C0
109D686X0025C0
109D187X0025F0
109D277X0025F0
109D357X0025T0
109D567X0025T0
109D687X0025K0
109D757X0025K2
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT +25 °C AT -55 °C
120 Hz
120 Hz
+85 °C
+25 °C
(Ω)
(Ω)
+125 °C
6 VDC AT +85 °C; 7 VDC AT +125 °C
3.0
54
2.0
9.0
2.5
18
3.0
14
1.5
18
5.0
20
1.0
13
6.0
24
8 VDC AT +85 °C; 5 VDC AT +125 °C
3.0
45
2.0
9.0
2.5
25
3.0
14
2.5
22
3.0
14
1.0
14
7.0
25
10 VDC AT +85 °C; 7 VDC AT +125 °C
3.0
60
2.0
9.0
4.0
60
2.0
9.0
3.0
54
2.0
9.0
2.5
30
3.0
16
2.5
30
3.0
16
2.5
27
3.0
16
1.5
20
5.0
20
1.0
18
7.0
25
1.5
18
5.0
20
1.0
15
7.0
25
15 VDC AT +85 °C; 10 VDC AT +125 °C
4.0
80
2.0
9.0
4.0
80
2.0
9.0
4.0
72
2.0
9.0
2.5
35
3.0
16
2.5
35
3.0
16
2.5
31
3.0
16
1.8
25
6.0
24
1.8
22
6.0
24
1.8
22
6.0
24
1.2
20
8.0
32
1.2
17
8.0
32
20 VDC AT +85 °C; 13 VDC AT +125 °C
4.3
90
2.0
9.0
4.3
81
2.0
9.0
2.7
35
3.0
16
2.7
31
3.0
16
25 VDC AT +85 °C; 15 VDC AT +125 °C
4.3
100
2.0
9.0
4.3
90
2.0
9.0
2.7
37
3.0
16
2.7
33
3.0
16
1.8
27
7.0
28
1.8
24
7.0
28
1.2
19
8.0
32
1.0
18
8.0
29
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
-55 °C
+85 °C
+125 °C
-45
-88
-90
-90
+13
+16
+20
+25
+16
+20
+25
+30
160
300
480
670
-60
-75
-90
-60
+13
+16
+16
+20
+16
+20
+20
+30
180
300
300
670
-50
-45
-55
-70
-65
-77
-75
-75
-88
-88
+13
+13
+13
+16
+16
+16
+20
+30
+20
+25
+16
+16
+16
+20
+20
+20
+25
+30
+25
+30
160
160
180
300
300
300
480
670
480
670
-40
-38
-44
-60
-60
-66
-65
-77
-77
-70
-77
+13
+13
+13
+16
+16
+16
+20
+20
+20
+30
+25
+16
+16
+16
+20
+20
+20
+25
+25
+25
+30
+30
140
160
160
300
300
300
340
440
440
610
610
-38
-43
-60
-66
+13
+13
+16
+16
+16
+16
+20
+20
140
160
300
300
-35
-40
-55
-62
-60
-72
-72
-60
+12
+12
+13
+13
+20
+20
+25
+25
+15
+15
+16
+16
+25
+25
+30
+25
140
160
300
300
440
440
610
610
Note
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
Revision: 11-Jan-2022
Document Number: 40023
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
EXTENDED RATINGS
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT
+25
°C
AT
-55
°C
CAPACITANCE CASE
PART NUMBER (1)
120 Hz
120 Hz
(μF)
CODE
+85 °C
+25 °C
(Ω)
(Ω)
+125 °C
39
47
56
150
180
220
330
390
470
560
C
C
C
F
F
F
T
T
T
K
109D396X0030C0
109D476X0030C0
109D566X0030C0
109D157X0030F0
109D187X0030F0
109D227X0030F0
109D337X0030T0
109D397X0030T0
109D477X0030T0
109D567X0030K0
33
47
120
220
390
470
C
C
F
T
T
K
109D336X0035C0
109D476X0035C0
109D127X0035F0
109D227X0035T0
109D337X0035T0
109D477X0035K0
22
33
82
120
160
250
270
330
C
C
F
F
T
T
T
K
109D226X0050C0
109D336X0050C0
109D826X0050F0
109D127X0050F0
109D167X0050T0
109D257X0050T0
109D277X0050T0
109D337X0050K0
18
27
68
100
140
220
270
C
C
F
F
T
T
K
109D186X0060C0
109D276X0060C0
109D686X0060F0
109D107X0060F0
109D147X0060T0
109D227X0060T0
109D277X0060K0
12
15
22
47
56
82
82
110
180
200
220
270
C
C
C
F
F
F
T
T
T
T
K
K
109D126X0075C0
109D156X0075C0
109D226X0075C0
109D476X0075F0
109D566X0075F0
109D826X0075F0
109D826X0075T2
109D117X0075T0
109D187X0075T0
109D207X0075T0
109D227X0075K0
109D277X0075K2
30 VDC AT +85 °C; 20 VDC AT +125 °C
5.2
110
2.0
9.0
5.2
100
2.0
9.0
5.2
100
2.0
9.0
2.5
40
3.0
9.0
2.5
40
3.0
16
2.5
36
3.0
16
1.8
28
8.0
16
1.8
28
8.0
32
1.8
25
8.0
32
1.3
20
9.0
32
35 VDC AT +85 °C; 22 VDC AT +125 °C
5.2
130
2.0
9.0
5.2
115
2.0
9.0
2.5
45
3.0
16
1.8
30
8.0
32
1.8
27
8.0
32
1.3
21
9.0
36
50 VDC AT +85 °C; 30 VDC AT +125 °C
5.0
150
2.0
9.0
5.0
135
2.0
9.0
2.5
55
4.0
24
2.5
49
4.0
24
1.8
32
6.0
32
1.8
29
8.0
32
1.8
29
8.0
32
1.5
22
9.0
36
60 VDC AT +85 °C; 40 VDC AT +125 °C
5.0
160
3.0
12
5.0
144
3.0
12
3.0
60
3.0
20
2.5
54
4.0
20
2.0
32
8.0
32
1.8
29
8.0
32
1.5
23
9.0
36
75 VDC AT +85 °C; 50 VDC AT +125 °C
5.0
175
2.0
12
5.0
160
2.0
12
5.0
157
3.0
12
3.0
75
4.0
24
3.0
70
4.0
24
2.5
63
4.0
24
2.5
45
5.0
20
2.0
33
9.0
36
1.8
30
9.0
36
1.8
29
8.0
32
2.2
24
10
40
1.3
24
10
40
MAX. CAPACITANCE
CHANGE (%) AT
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
-55 °C
+85 °C
+125 °C
-28
-30
-38
-40
-45
-60
-45
-50
-65
-65
+10
+10
+12
+12
+13
+13
+20
+20
+20
+25
+12
+12
+15
+15
+16
+16
+25
+25
+25
+30
140
140
140
300
300
300
440
440
550
590
-30
-35
-45
-45
-58
-58
+10
+10
+13
+20
+20
+25
+12
+12
+16
+25
+25
+30
140
140
300
440
440
590
-24
-29
-35
-42
-35
-40
-46
-46
+10
+10
+10
+12
+20
+20
+20
+25
+12
+12
+15
+15
+25
+25
+25
+30
140
140
300
300
420
440
440
550
-20
-24
-30
-36
-30
-40
-45
+10
+10
+12
+12
+16
+16
+20
+12
+12
+15
+15
+20
+20
+25
140
140
270
300
420
440
550
-12
-14
-19
-18
-20
-30
-25
-25
-35
-40
-40
-40
+8
+10
+10
+10
+12
+12
+16
+16
+16
+20
+20
+20
+10
+12
+12
+12
+15
+15
+20
+20
+20
+25
+25
+25
140
140
140
270
270
300
400
420
440
440
450
450
Note
Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
(1)
Revision: 11-Jan-2022
Document Number: 40023
8
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
109D
www.vishay.com
Vishay
EXTENDED RATINGS
MAX. DCL
MAX. ESR MAX. IMP.
(μA) AT
AT
+25
°C
AT
-55
°C
CAPACITANCE CASE
PART NUMBER (1)
120 Hz
120 Hz
(μF)
CODE
+85 °C
+25 °C
(Ω)
(Ω)
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
120 Hz
(mA)
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.0
C
109D205X0100C0
14.0
870
3.0
12
-20
+12
+12
100
8.2
C
109D825X0100C0
6.0
250
3.0
12
-12
+12
+12
130
10
C
109D106X0100C0
6.0
200
3.0
12
-17
+10
+12
130
33
F
109D336X0100F0
3.5
85
4.0
24
-18
+15
+15
250
39
F
109D396X0100F0
3.5
80
5.0
24
-20
+12
+15
250
56
T
109D566X0100T0
2.2
45
9.0
36
-20
+15
+15
400
68
T
109D686X0100T0
2.2
40
10
40
-30
+14
+16
400
86
T
109D866X0100T0
3.2
30
10
40
-25
+15
+15
370
120
K
109D127X0100K0
2.8
30
12
48
-35
+15
+17
440
6.8
C
109D685X0125C0
-14
+10
+12
130
125 VDC AT +85 °C; 85 VDC AT +125 °C
11.7
300
3.0
12
27
F
109D276X0125F0
3.5
90
5.0
24
-18
+12
+15
250
39
T
109D396X0125T0
2.2
60
10
40
-16
+14
+16
400
47
T
109D476X0125T0
2.2
50
10
40
-26
+14
+16
400
56
K
109D566X0125K0
4.1
32
10
40
-25
+15
+15
330
82
K
109D826X0125K0
2.8
32
12
48
-30
+15
+17
440
Note
Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 % units, change the digit
following the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number. For
RoHS-compliant add “E3”
(1)
Revision: 11-Jan-2022
Document Number: 40023
9
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024
工商网监
湘ICP备2023018690号
