125LD22-R

125L Series www.vishay.com Vishay Cera-Mite AC Line Rated Ceramic Disc Capacitors Class X1, 400 VAC / Class Y4, 125 VAC FEATURES • Complying with IEC 60384-14 • High reliability • Complete range of capacitance values • Radial leads • Singlelayer AC disc safety capacitors • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • X1, Y4 according to IEC 60384-14 QUICK REFERENCE DATA • Across-the-line DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Voltage (VAC) • Line by-pass • Antenna coupling Y5V 125 • EMI / RFI suppression 400 Min. Capacitance (pF) 1000 Max. Capacitance (pF) 50 000 Mounting Radial INSULATION RESISTANCE Min. 1000 ΩF TOLERANCE ON CAPACITANCE ± 20 % DISSIPATION FACTOR 2.0 % max. at 1 kHz; 1 V DESIGN The capacitors consist of a ceramic disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm) or 0.025" (0.64 mm). The capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm) or 0.250" (6.4 mm). The standard tolerance is ± 20 %. Coating is made of flame retardant epoxy resin in accordance with “UL 94 V-0”. CAPACITANCE RANGE 1.0 nF to 0.050 μF RATED VOLTAGE CERAMIC DIELECTRIC IEC 60384-14: Y5V (Class 2) • X1: 400 VAC, 50 Hz CLIMATIC CATEGORY ACC. TO EN 60068-1 • Y4: 125 VAC, 50 Hz 25/125/21 DIELECTRIC STRENGTH BETWEEN LEADS OPERATING TEMPERATURE RANGE Component test: 2000 VAC, 50 Hz, 2 s -30 °C to +125 °C As repeated test admissible only once with: 1800 VAC, 50 Hz, 2 s Random sampling test (destructive test): 2000 VAC, 50 Hz, 60 s DIELECTRIC STRENGTH OF BODY INSULATION 2300 VAC, 50 Hz, 60 s (destructive test) Revision: 04-Jan-2021 Document Number: 23106 1 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 125L Series www.vishay.com Vishay Cera-Mite DIMENSIONS in inches (millimeters) 1.250 min. (32) Dmax. LO LS Tinned Copper Leads Ø Tmax. 0.125 max. (3.2) ORDERING INFORMATION, CERAMIC X1 / Y4 CAPACITORS 125L LO LEAD OFFSET INCH (mm) ± 0.5 mm ORDERING CODE 0.195 (5.0) 0.094 (2.4) 125LD10-R 0.330 (8.4) 0.195 (5.0) 0.098 (2.5) 125LD15-R 0.330 (8.4) 0.188 (4.8) 0.091 (2.3) 125LD20-R Dmax. DIAMETER INCH (mm) Tmax. THICKNESS INCH (mm) 1000 0.330 (8.4) 1500 2000 C (pF) TOL. (%) WIRE SIZE AWG INCH (mm) LS LEAD SPACE INCH (mm) ± 1 mm 0.250 (6.4) 2200 0.330 (8.4) 0.182 (4.7) 0.083 (2.1) 125LD22-R 3300 0.365 (9.3) 0.195 (5.0) 0.094 (2.4) 125LD33-R 4700 0.400 (10.2) 0.185 (4.7) 0.087 (2.2) 125LD47-R 20 5000 0.032 (0.81) 0.430 (11.0) 0.195 (5.0) 0.094 (2.4) 125LD50-R 0.490 (12.5) 0.198 (5.1) 0.098 (2.5) 125LD68-R 8200 0.530 (13.5) 0.193 (5.0) 0.094 (2.4) 125LD82-R 0.010 μF 0.560 (14.3) 0.195 (5.0) 0.098 (2.5) 125LS10-R 0.015 μF 0.720 (18.3) 0.205 (5.3) 0.102 (2.6) 125LS15-R 0.106 (2.7) 125LS18-R 6800 ± 20 0.375 (9.5) 0.018 μF 0.790 (20.1) 0.205 (5.3) 0.020 μF 0.720 (18.3) 0.250 (6.4) 22 0.025 (0.64) 0.087 (2.2) 125LS20-R 0.022 μF 0.790 (20.1) 0.192 (4.9) 20 0.032 (0.81) 0.094 (2.4) 125LS22-R 0.030 μF 0.720 (18.3) 0.240 (6.1) 22 0.025 (0.64) 0.087 (2.2) 125LS30-R 0.050 μF 0.925 (23.5) 0.275 (7.0) 22 0.025 (0.64) 0.087 (2.2) 125LS50-R Notes • Alternate lead spacings of 7.5 mm and 10 mm are available bulk or tape and reel on request • Minimum lead clearance according to IEC 60384-14: 0.118" (3 mm) TAPE AND REEL OPTIONS Part number codes and specifications for tape and reel packaging are found in the general information document - find web-link below. Revision: 04-Jan-2021 Document Number: 23106 2 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 125L Series www.vishay.com Vishay Cera-Mite LEAKAGE CURRENT VS. VOLTAGE (Typical) INSERTION LOSS VS. FREQUENCY (Typical) 10 1.5 125LD33-R 1 125LD22-R 125LD20-R 125LD15-R 0.5 125LD47-R Insertion Loss (dB) Leakage Current (mA) RMS 2 0 0 500 1000 1500 20 30 40 50 125LD10-R 100 1 2000 10 Frequency (MHz) AC Voltage (V) RMS 10 3 125LS10-R 2 125LD68-R 125LD82-R 125LD50-R 125LD47-R 1 Insertion Loss (dB) Leakage Current (mA) RMS 4 0 0 500 1000 1500 AC Voltage (V) RMS 20 30 40 50 125LD47-R 125LD33-R 100 1 2000 25 125LD15-R 125LD20-R 125LD22-R 10 Frequency (MHz) 100 10 125LS50-R 20 15 125LS30-R 10 125LS22-R 125LS20-R 125LS18-R 5 Insertion Loss (dB) Leakage Current (mA) RMS 100 20 30 40 50 125LS15-R 125LS10-R 0 0 500 1000 1500 AC Voltage (V) RMS 100 2000 1 125LD50-R 125LD68-R 125LD82-R 10 Frequency (MHz) 100 Insertion Loss (dB) 10 20 30 40 50 100 Revision: 04-Jan-2021 125LS50-R 125LS30-R 0.1 125LS18-R 125LS20-R 125LS22-R 1 10 Frequency (MHz) 100 Document Number: 23106 3 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 125L Series www.vishay.com Vishay Cera-Mite APPROVALS IEC 60384-14 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y4-capacitor: CB test certificate: DE1-63495 1 nF to 50 nF 125 VAC X1-capacitor: CB test certificate: DE1-63495 1 nF to 50 nF 400 VAC VDE Y4-capacitor: VDE marks approval: 40003976 1 nF to 50 nF 125 VAC X1-capacitor: VDE marks approval: 40003976 1 nF to 50 nF 400 VAC Y4-capacitor: UL test certificate: E99264 1 nF to 50 nF 125 VAC X1-capacitor: UL test certificate: E99264 1 nF to 50 nF 400 VAC DIN EN 60384-14 VDE 0565-1-1 - Safety tests Underwriters Laboratories Inc. UL 60384-14, CSA E60384-1, CSA E60384-14 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. MARKING Sample CM 125L 472M IEC 60384-14 Y4 125V~ X1 400V~ XX - XXX Notes • Marking IEC 60384-14 does not apply for Ø ≤ 9 mm • Coding is as follows: 1st figure indicates the year and 2nd figure indicates the month according to IEC 60062. The 3rd to 5th figure indicate the last three digits of the lot number RELATED DOCUMENTS General Information www.vishay.com/doc?23140 CB Test Certificate www.vishay.com/doc?22234 VDE Marks Approval www.vishay.com/doc?22235 UL Test Certificate www.vishay.com/doc?22236 Revision: 04-Jan-2021 Document Number: 23106 4 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000