134D686X0100F6E3

Upgrade for High Shock and Vibration Performance With T34 134D www.vishay.com Vishay Sprague Wet Tantalum HI-TMP® Capacitors Tantalum Case With Glass-to-Tantalum Hermetic Seal for -55 °C to +200 °C Operation FEATURES • High capacitance • Hermetically sealed, tantalum case Available • +200 °C high temperature Available • Terminations: axial, standard tin / lead (SnPb) • 100 % tin (RoHS-compliant) available • Mounting: through-hole LINKS TO ADDITIONAL RESOURCES Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D 3D Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details 3D Models PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +85 °C (to +200 °C with voltage derating) Capacitance Tolerance: at 120 Hz, +25 °C; ± 20 % standard; ± 10 % DC Leakage Current (DCL Max.): at +25 °C and above: leakage current shall not exceed the values listed in the Standard Ratings tables. APPLICATIONS • Industrial • Petroleum exploration • High temperature / high stress environment Life Test: capacitors are capable of withstanding a minimum 500 h life test at a temperature of +200 °C at the applicable derated DC working voltage. ORDERING INFORMATION 134D 227 X0 100 K 6 E3 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C CASE CODE CASE INSULATION RoHS-COMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) See Ratings and Case Codes table 8 = no outer case insulation 6 = high temperature insulation film E3 = 100 % tin termination (RoHS-compliant design) Blank = SnPb termination (standard design) Note • Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight Revision: 22-Mar-2024 Document Number: 40072 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Shock and Vibration Performance With T34 134D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] E L1 0.0253 ± 0.002 [0.64 ± 0.05] dia. (No. 22 AWG tinned nickel leads solderable and weldable) Weld Tantalum L2 CASE CODE D E D L1 (1) L2 (Max.) E WEIGHT (g) (Max.) T1 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 / - 0.016 [11.51 + 0.79 / - 0.41] 0.734 [18.64] 1.500 ± 0.250 [38.10 ± 6.35] 2.6 F T2 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 / - 0.016 [16.28 + 0.79 / - 0.41] 0.922 [23.42] 2.250 ± 0.250 [57.15 ± 6.35] 6.2 T T3 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 / - 0.016 [19.46 + 0.79 / - 0.41] 1.047 [26.59] 2.250 ± 0.250 [57.15 ± 6.35] 11.6 K T4 0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 / - 0.016 [26.97 + 0.79 / - 0.41] 1.343 [34.11] 2.250 ± 0.250 [57.15 ± 6.35] 17.7 TYPE 134D CLR 79 / 81 EQUIV. C Note (1) For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body SMD PRODUCT DIMENSIONS in inches [millimeters] Styles J, K Styles L, M Solder type Term. code SnPb J K 100 % tin (RoHS-compliant) Solder type Term. code SnPb L M 100 % tin (RoHS-compliant) L L L1 ØD H2 H H2 H Tl x 2 Tw x 2 L1 ØD Tl x 2 Tw x 2 A CASE CODE B A B Tl H (max.) (max.) (max.) (max.) Tw ± 0.008 H2 (max.) L (max.) L1 D (max.) 0.177 [4.5] 0.158 [4.0] 0.296 [7.5] 0.705 [17.9] 0.469 + 0.031 / -0.016 [11.91 + 0.79 / -0.41] 0.228 [5.8] 0.157 [4.0] 0.212 [5.4] 0.225 [5.7] 0.374 [9.5] 0.903 [22.9] 0.668 + 0.012 / -0.12 [16.97 + 0.30 / -0.30] 0.316 [8.0] 0.858 [21.8] 0.157 [4.0] 0.280 [7.1] 0.331 [8.4] 0.492 [12.5] 1.051 [26.7] 0.806 + 0.012 / -0.12 [20.47 + 0.30 / -0.30] 0.397 [10.1] 1.140 [29.0] 0.157 [4.0] 0.295 [7.5] 0.331 [8.4] 0.492 [12.5] 1.343 [34.1] 1.062 + 0.031 / - 0.016 [26.97 + 0.79 / - 0.41] 0.397 [10.1] TYPE 134D CLR 79 / 81 EQUIV. C T1 0.773 [19.6] 0.513 [13.0] 0.157 [4.0] F T2 1.001 [25.4] 0.720 [18.3] T T3 1.143 [29.0] K T4 1.432 [36.4] Note • Use appropriate adhesive between capacitor body and the board for improved mechanical strength Revision: 22-Mar-2024 Document Number: 40072 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Shock and Vibration Performance With T34 134D www.vishay.com Vishay Sprague RATINGS AND CASE CODES (ESR mΩ) μF 50 V 60 V 75 V 100 V 10 125 V C 15 C 33 C 47 C F 50 F 68 C F 100 T 110 F 150 F T 180 K F 220 F K/T 240 K 330 T 350 K 390 T 400 K 470 T K 560 K K 680 K K 750 K 1000 K K K STANDARD RATINGS TYP. AC MAX. DCL (μA) MAX. MAX. CAPACITANCE MAX. ΔCAP. (%) RIPPLE IMP., Z AT 25 °C CASE 120 Hz ΔCAP. 85 °C AT -25 °C AT -25 °C 120 Hz CODE ESR 85 °C / 40 kHz 25 °C 200 °C 85 °C 125 °C (Ω) (μF) (Ω) (%) 125 °C (mA) RMS PART NUMBER LIFE TEST PERFORMANCE (h AT +200 °C) 50 VDC AT 85 °C; 30 VDC AT 125 °C; 30 VDC AT 200 °C 68 C 1.50 1 5 50 22 -6 12 55 1400 134D686(1)050C(2)(3) 500 220 F 0.90 2 10 100 9 -15 13 50 2300 134D227(1)050F(2)(3) 500 470 T 0.75 3 25 250 6 -24 10 25 2650 134D477(1)050T(2)(3) 500 680 K 0.70 5 40 400 4 -22 12 40 2900 134D687(1)050K(2)(3) 500 47 C 2.00 1 5 50 34 150 F 1.10 2 10 100 390 T 0.90 3 25 250 560 K 0.80 5 40 1000 K 0.50 20 120 33 C 2.50 1 5 50 45 -3.5 8 25 110 F 1.30 2 10 100 16 -8 8 30 180 F 1.50 5 25 15 330 T 1.00 3 30 300 8 -30 470 K 0.90 5 50 500 6 -20 750 K 0.60 20 120 3 -25 < 10 < 15 3500 134D757(1)075K(2)(3) 500 1000 K 0.50 25 90 3 -30 < 20 < 25 3500 134D108(1)075K(2)(3) 500 60 VDC AT 85 °C; 40 VDC AT 125 °C; 36 VDC AT 200 °C -8 8 12 1250 134D476(1)060C(2)(3) 500 13 -11 10 30 2050 134D157(1)060F(2)(3) 500 7 -27 10 25 2450 134D397(1)060T(2)(3) 500 400 5 -21 12 40 2700 134D567(1)060K(2)(3) 500 1200 3 -25 < 12 < 15 3500 134D108(1)060K(2)(3) 500 1100 134D336(1)075C(2)(3) 500 1900 134D117(1)075F(2)(3) 500 20 2000 134D187(1)075F(2)(3) 500 10 25 2300 134D337(1)075T(2)(3) 500 10 40 2550 134D477(1)075K(2)(3) 500 75 VDC AT 85 °C; 50 VDC AT 125 °C; 45 VDC AT 200 °C Revision: 22-Mar-2024 Document Number: 40072 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Shock and Vibration Performance With T34 134D www.vishay.com Vishay Sprague STANDARD RATINGS TYP. AC MAX. DCL (μA) MAX. MAX. CAPACITANCE MAX. ΔCAP. (%) RIPPLE IMP., Z AT 25 °C CASE 120 Hz ΔCAP. 85 °C AT -25 °C AT -25 °C 120 Hz CODE ESR 85 °C / 40 kHz 25 °C 200 °C 85 °C 125 °C (Ω) (μF) (Ω) (%) 125 °C (mA) RMS PART NUMBER LIFE TEST PERFORMANCE (h AT +200 °C) 100 VDC AT 85 °C; 65 VDC AT 125 °C; 60 VDC AT 200 °C 15 C 3.50 1 5 50 95 -2.5 8 25 950 134D156(1)100C(2)(3) 500 68 F 2.10 2 10 100 25 -6 8 25 1500 134D686(1)100F(2)(3) 500 150 T 1.60 3 25 250 14 -12 8 22 1800 134D157(1)100T(2)(3) 500 220 T 1.60 5 30 300 15 -40 10 15 1800 134D227(1)100T(2)(3) 500 220 K 1.20 5 50 500 13 -44 8 15 2200 134D227(1)100K(2)(3) 1000 400 K 0.70 10 120 1200 5 -15 10 15 3250 134D407(1)100K(2)(3) 500 470 K 0.70 25 200 2000 8 -15 5 10 3250 134D477(1)100K(2)(3) 1000 560 K 0.70 25 200 2000 5 -25 15 20 5500 134D567(1)100K(2)(3) 1000 750 K 0.90 30 150 1500 4 -30 20 25 4500 134D757(1)100K(2)(3) 500 125 VDC AT 85 °C; 85 VDC AT 125 °C; 75 VDC AT 200 °C 10 C 5.50 1 5 50 145 -2.5 8 20 750 134D106(1)125C(2)(3) 500 47 F 2.30 2 10 100 35 -5 7 20 1450 134D476(1)125F(2)(3) 500 50 F 2.30 3 10 100 35 -5 7 20 1450 134D506(1)125F(2)(3) 500 100 T 1.80 3 25 250 24 -20 8 20 1700 134D107(1)125T(2)(3) 500 150 K 1.60 5 50 500 13 -10 6 12 1900 134D157(1)125K(2)(3) 500 240 K 0.80 10 50 500 10 -10 6 12 2500 134D247(1)125K(2)(3) 500 350 K 0.80 25 250 2500 15 -55 8 12 3250 134D357(1)125K(2)(3) 1000 (1) Notes • Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = no film insulation, 6 = high temperature film insulation (3) Termination: blank = standard tin/lead, E3 = RoHS-compliant 100 % tin (1) This rating withstands 62 V DC at 200 °C for 1000 h RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIED PEAK VOLTAGE FREQUENCYOF APPLIED RIPPLE CURRENT 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz AMBIENT STILL ≤ 55 85 105 125 ≤ 55 85 105 125 ≤ 55 85 105 125 ≤ 55 85 105 125 ≤ 55 85 105 125 ≤ 55 85 105 125 AIR TEMP. IN °C % of 85 °C rated peak voltage 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - - 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - 66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 Revision: 22-Mar-2024 Document Number: 40072 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Shock and Vibration Performance With T34 134D www.vishay.com Vishay Sprague TYPICAL PERFORMANCE CHARACTERISTICS OF 134D CAPACITORS ELECTRICAL CHARACTERISTICS ITEM Operating temperature range Capacitor tolerance Capacitor change by temperature ESR Impedance DCL (leakage current) AC ripple current Reverse voltage Surge voltage PERFORMANCE CHARACTERISTICS -55 °C to +85 °C (to +200 °C with voltage derating) ± 20 %, ± 10 % at 120 Hz, at +25 °C Limit per Standard Ratings table Limit per Standard Ratings table, at +25 °C, 120 Hz Limit per Standard Ratings table, at -55 °C, 120 Hz Limit per Standard Ratings table Limit per Standard Ratings table, at +85 °C and 40 kHz None Surge voltage shall be in accordance with MIL-PRF-39006 and Table 2 of DSCC93026. The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under any conditions including transients and peak ripple at the highest line voltage. The DC surge voltage is 115 % of rated DC voltage. PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Capacitors shall be capable of withstanding a minimum 500 h life test at a temperature +200 °C at derated voltage. Life testing ENVIRONMENTAL CHARACTERISTICS ITEM CONDITION Seal MIL-PRF-39006 Moisture resistance MIL-PRF-39006 Barometric pressure (reduced) MIL-STD-202, method 105, condition E COMMENTS When the capacitors are tested as specified in MIL-PRF-39006, there shall be no evidence of leakage. Moisture resistance shall be in accordance with MIL-PRF-39006. Number of cycles: 10 continuous cycles Altitude 150 000 feet MECHANICAL CHARACTERISTICS ITEM TEST METHOD CONDITION Shock (specified pulse) MIL-STD-202, method 213 Test condition I (100 g) Vibration, high frequency MIL-STD-202, method 204 Test condition D (20 g peak) Thermal shock MIL-STD-202, method 107 Test condition A, 30 cycles Solderability MIL-STD-202, method 208 ANSI/J-STD-002, test A Solderability shall be in accordance with MIL-PRF-39006. Terminal strength MIL-STD-202, method 211 Terminal strength shall be in accordance with MIL-PRF-39006. Resistance to solder heat MIL-STD-202, method 210 Terminals MIL-STD-1276 Marking MIL-STD-1285 SELECTOR GUIDES Tantalum Selector Guide Parameter Comparison Guide Revision: 22-Mar-2024 Test condition C The capacitors shall meet the requirements of MIL-PRF-39006. Terminals shall be as specified in MIL-STD-1276. The length and diameter of the terminals shall be as specified in Dimensions table. All terminals shall be permanently secured internally and externally, as applicable. All external joints shall be welded. Marking of capacitors conforms to method I of MIL-STD-1285 and include capacitance (in μF), capacitance tolerance letter, rated voltage, date code, lot symbol, and Vishay trademark. www.vishay.com/doc?49054 www.vishay.com/doc?42088 Document Number: 40072 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Document Number: 91000 1 For technical questions, contact: THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 01-Jan-2024