173D106X5010V

173D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX™ Capacitors, Axial-Leaded, Molded Case FEATURES • Axial through-hole terminations: tin / lead (SnPb), 100 % tin (RoHS-compliant) • Miniature axial-lead capacitors available in Available 5 sizes • Precision molded in gold colored, flame Available retardant, thermosetting epoxy resin • Laser marked for improved legibility and tapered end of case provides easy identification of positive terminal • Standard orders are lead taped and reeled; orders under 500 are taped only • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details LINKS TO ADDITIONAL RESOURCES 3D 3D APPLICATIONS 3D Models Designed for high performance automotive, industrial and commercial electronic equipment. PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Tolerance: at 120 Hz, +25 °C. ± 20 %, ± 10 % standard ± 5 % available as special Capacitance Range: 0.10 μF to 330 μF. Voltage Rating: 2 VDC to 50 VDC. Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor, as determined from the expression 2πfRC, shall not exceed the values listed in the Standard Ratings table. DC Leakage Current (DCL Max.): at +25 °C: leakage current shall not exceed the values listed in the Standard Ratings table. at +85 °C: leakage current shall not exceed 10 times the values listed in the Standard Ratings table. at +125 °C: leakage shall not exceed 15 times the values listed in the Standard Ratings table. Life Test: capacitors shall withstand rated DC voltage applied at +85 °C for 2000 h and for 1000 h applied at + 25 °C derated voltage. Following the life test: 1. DCL shall not exceed 125 % of the initial requirements. 2. Dissipation factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 10 %. ORDERING INFORMATION 173D MODEL 335 CAPACITANCE X9 CAPACITANCE TOLERANCE 006 DC VOLTAGE RATING AT +85 °C U CASE CODE W PACKAGING E3 RoHSCOMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % *X5 = ± 5 % * Special order This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Ratings and Case Codes table W = tape and reel Blank = ammo pack E3 = 100 % tin termination (RoHScompliant) Blank = SnPb termination DIMENSIONS in inches [millimeters] 0.875 [22.23] Min. (-) L Max. Tinned solid leads CASE CODE U V W X Y Revision: 08-Feb-2023 D (MAX.) 0.095 [2.41] 0.110 [2.79] 0.180 [4.57] 0.180 [4.57] 0.280 [7.11] 0.875 [22.23] Min. (+) Tapered end identifies anode L (MAX.) 0.260 [6.60] 0.290 [7.37] 0.345 [8.76] 0.420 [10.67] 0.550 [13.97] D Max. LEAD DIAMETER 0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.025 [0.64] Document Number: 40019 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 173D www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 2V 4V 6V 10 V 15 V 20 V 25 V 35 V 50 V 0.10 U U 0.12 U U 0.15 U U 0.18 U U 0.22 U U 0.27 U U 0.33 U V 0.39 U V 0.47 U U V 0.56 U V V 0.68 U V V 0.82 1.0 U 1.2 U V V U U V V U V V W 1.5 U U V V W 1.8 U V V W W 2.2 U U U/V V W W 2.7 U V V V W X 3.3 U U V V V W X 3.9 U V V V W W X 4.7 U U V V V W W X 5.6 U V V V W W X Y 6.8 U U V V V W W X Y 8.2 U V V V W W W X Y 10 U V V V W W W X Y 12 V V V W W X X Y Y 15 V V V W W X X Y Y 18 V V W W X X Y Y Y 22 V V W W X X Y Y Y 27 V W W X X Y Y Y 33 V W W X X Y Y Y 39 W W X X Y Y Y Y 47 W W X X Y Y Y Y 56 W X X Y Y Y 68 W X X Y Y Y 82 Y Y Y Y 100 Y Y Y Y 120 Y Y Y 150 Y Y Y 180 Y Y 220 Y Y 270 Y 330 Y Revision: 08-Feb-2023 Document Number: 40019 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 173D www.vishay.com Vishay Sprague MARKING PARAMETER EXAMPLE Product type 173D Polarity + Capacitance code, pF 156 Capacitance tolerance code K Voltage 25 V Date code 1209 Lead (Pb)-free indicator (1) L Vishay marking 2 Note (1) On big case sizes (W,X,Y) lead free indicator is printed after date code, for example 1209L. STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) 2 VDC AT +85 °C, SURGE = 2.5 V; 1.5 VDC AT +125 °C, SURGE = 1.8 V 6.8 U 173D685(1)002U(2)(3) 0.5 8.2 U 173D825(1)002U(2)(3) 0.5 10 10 10 U 173D106(1)002U(2)(3) 0.5 10 12 V 173D126(1)002V(2)(3) 0.5 10 15 V 173D156(1)002V(2)(3) 0.5 10 18 V 173D186(1)002V(2)(3) 0.5 10 22 V 173D226(1)002V(2)(3) 0.5 10 27 V 173D276(1)002V(2)(3) 0.5 10 33 V 173D336(1)002V(2)(3) 0.5 10 39 W 173D396(1)002W(2)(3) 0.6 10 47 W 173D476(1)002W(2)(3) 0.8 10 56 W 173D566(1)002W(2)(3) 0.9 10 68 W 173D686(1)002W(2)(3) 1.1 10 4 VDC AT +85 °C, SURGE = 5 V; 2.5 VDC AT +125 °C, SURGE = 3 V 4.7 U 173D475(1)004U(2)(3) 0.5 8 5.6 U 173D565(1)004U(2)(3) 0.5 8 6.8 U 173D685(1)004U(2)(3) 0.5 8 8.2 V 173D825(1)004V(2)(3) 0.5 8 10 V 173D106(1)004V(2)(3) 0.5 8 12 V 173D126(1)004V(2)(3) 0.5 8 15 V 173D156(1)004V(2)(3) 0.5 8 18 V 173D186(1)004V(2)(3) 0.6 8 22 V 173D226(1)004V(2)(3) 0.7 8 27 W 173D276(1)004W(2)(3) 0.9 8 33 W 173D336(1)004W(2)(3) 1.1 8 39 W 173D396(1)004W(2)(3) 1.2 8 47 W 173D476(1)004W(2)(3) 1.5 8 56 X 173D566(1)004X(2)(3) 1.5 8 68 X 173D686(1)004X(2)(3) 2.2 8 Note • Part number definition: (1) For 10 % tolerance specify “X9”; for 20 % specify “X0”; for 5 % specify “X5” (special order) (2) Packaging code: for reel 13" specify W, leave blank for ammo pack (3) Termination: for 100 % tin specify E3, for SnPb leave blank Revision: 08-Feb-2023 Document Number: 40019 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 173D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) 6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C, SURGE = 5 V U 173D335(1)006U(2)(3) 0.5 U 173D395(1)006U(2)(3) 0.5 U 173D475(1)006U(2)(3) 0.5 V 173D565(1)006V(2)(3) 0.5 V 173D685(1)006V(2)(3) 0.5 V 173D825(1)006V(2)(3) 0.5 V 173D106(1)006V(2)(3) 0.5 V 173D126(1)006V(2)(3) 0.6 V 173D156(1)006V(2)(3) 0.7 W 173D186(1)006W(2)(3) 0.9 W 173D226(1)006W(2)(3) 1.1 W 173D276(1)006W(2)(3) 1.3 W 173D336(1)006W(2)(3) 1.5 X 173D396(1)006X(2)(3) 1.6 X 173D476(1)006X(2)(3) 2.3 X 173D566(1)006X(2)(3) 2.7 X 173D686(1)006X(2)(3) 3.3 Y 173D826(1)006Y(2)(3) 3.9 Y 173D107(1)006Y(2)(3) 4.8 Y 173D127(1)006Y(2)(3) 5.0 Y 173D157(1)006Y(2)(3) 5.0 Y 173D187(1)006Y(2)(3) 8.6 Y 173D227(1)006Y(2)(3) 10.0 Y 173D277(1)006Y(2)(3) 10.0 Y 173D337(1)006Y(2)(3) 10.0 10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V U U U V V V V V V W W W W X X X X Y Y Y Y 173D225(1)010U(2)(3) 173D275(1)010U(2)(3) 173D335(1)010U(2)(3) 173D395(1)010V(2)(3) 173D475(1)010V(2)(3) 173D565(1)010V(2)(3) 173D685(1)010V(2)(3) 173D825(1)010V(2)(3) 173D106(1)010V(2)(3) 173D126(1)010W(2)(3) 173D156(1)010W(2)(3) 173D186(1)010W(2)(3) 173D226(1)010W(2)(3) 173D276(1)010X(2)(3) 173D336(1)010X(2)(3) 173D396(1)010X(2)(3) 173D476(1)010X(2)(3) 173D566(1)010Y(2)(3) 173D686(1)010Y(2)(3) 173D826(1)010Y(2)(3) 173D107(1)010Y(2)(3) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.8 1.0 1.2 1.4 1.5 2.2 2.6 3.1 3.8 4.4 5.0 5.0 8.0 MAX. DF AT +25 °C 120 Hz (%) 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 Note • Part number definition: (1) For 10 % tolerance specify “X9”; for 20 % specify “X0”; for 5 % specify “X5” (special order) (2) Packaging code: for reel 13" specify W, leave blank for ammo pack (3) Termination: for 100 % tin specify E3, for SnPb leave blank Revision: 08-Feb-2023 Document Number: 40019 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 173D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) 10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V 120 150 180 220 Y 173D127(1)010Y(2)(3) 9.6 Y 173D157(1)010Y(2)(3) 10.0 Y 173D187(1)010Y(2)(3) 10.0 Y 173D227(1)010Y(2)(3) 10.0 15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C, SURGE = 12 V 8 8 8 8 1.0 U 173D105(1)015U(2)(3) 0.5 4 1.5 U 173D155(1)015U(2)(3) 0.5 4 1.8 U 173D185(1)015U(2)(3) 0.5 4 2.2 U 173D225(1)015U(2)(3) 0.5 4 2.7 V 173D275(1)015V(2)(3) 0.5 4 3.3 V 173D335(1)015V(2)(3) 0.5 4 3.9 V 173D395(1)015V(2)(3) 0.5 4 4.7 V 173D475(1)015V(2)(3) 0.6 4 5.6 V 173D565(1)015V(2)(3) 0.7 4 6.8 V 173D685(1)015V(2)(3) 0.8 6 8.2 W 173D825(1)015W(2)(3) 1.0 6 10 W 173D106(1)015W(2)(3) 1.2 6 12 W 173D126(1)015W(2)(3) 1.4 6 15 W 173D156(1)015W(2)(3) 1.5 6 18 X 173D186(1)015X(2)(3) 2.2 6 22 X 173D226(1)015X(2)(3) 2.6 6 27 X 173D276(1)015X(2)(3) 3.2 6 33 X 173D336(1)015X(2)(3) 4.0 6 39 Y 173D396(1)015Y(2)(3) 4.7 6 47 Y 173D476(1)015Y(2)(3) 5.0 6 56 Y 173D566(1)015Y(2)(3) 6.7 6 68 Y 173D686(1)015Y(2)(3) 8.2 6 82 Y 173D826(1)015Y(2)(3) 9.8 8 100 Y 173D107(1)015Y(2)(3) 10.0 8 120 Y 173D127(1)015Y(2)(3) 10.0 8 150 Y 173D157(1)015Y(2)(3) 10.0 8 20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C, SURGE = 16 V 1.0 U 173D105(1)020U(2)(3) 0.5 4 1.2 U 173D125(1)020U(2)(3) 0.5 4 1.5 U 173D155(1)020U(2)(3) 0.5 4 1.8 V 173D185(1)020V(2)(3) 0.5 4 2.2 U 173D225(1)020U(2)(3) 0.5 4 2.2 V 173D225(1)020V(2)(3) 0.5 4 2.7 V 173D275(1)020V(2)(3) 0.5 4 3.3 V 173D335(1)020V(2)(3) 0.5 4 3.9 V 173D395(1)020V(2)(3) 0.6 4 4.7 V 173D475(1)020V(2)(3) 0.8 4 5.6 W 173D565(1)020W(2)(3) 0.9 4 Note • Part number definition: (1) For 10 % tolerance specify “X9”; for 20 % specify “X0”; for 5 % specify “X5” (special order) (2) Packaging code: for reel 13" specify W, leave blank for ammo pack (3) Termination: for 100 % tin specify E3, for SnPb leave blank Revision: 08-Feb-2023 Document Number: 40019 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000