173D154X0035UWE3

173D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX™ Capacitors, Axial-Leaded, Molded Case FEATURES • Axial through-hole terminations: tin / lead (SnPb), 100 % tin (RoHS-compliant) • Miniature axial-lead capacitors available in Available 5 sizes • Precision molded in gold colored, flame Available retardant, thermosetting epoxy resin • Laser marked for improved legibility and tapered end of case provides easy identification of positive terminal • Standard orders are lead taped and reeled; orders under 500 are taped only • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details LINKS TO ADDITIONAL RESOURCES 3D 3D APPLICATIONS 3D Models PERFORMANCE CHARACTERISTICS Designed for high performance automotive, industrial and commercial electronic equipment. Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Tolerance: at 120 Hz, +25 °C. ± 20 %, ± 10 % standard ± 5 % available as special Capacitance Range: 0.10 μF to 330 μF. Voltage Rating: 2 VDC to 50 VDC. Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor, as determined from the expression 2πfRC, shall not exceed the values listed in the Standard Ratings table. DC Leakage Current (DCL Max.): at +25 °C: leakage current shall not exceed the values listed in the Standard Ratings table. at +85 °C: leakage current shall not exceed 10 times the values listed in the Standard Ratings table. at +125 °C: leakage shall not exceed 15 times the values listed in the Standard Ratings table. Life Test: capacitors shall withstand rated DC voltage applied at +85 °C for 2000 h and for 1000 h applied at + 25 °C derated voltage. Following the life test: 1. DCL shall not exceed 125 % of the initial requirements. 2. Dissipation factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 10 %. ORDERING INFORMATION 173D MODEL 335 CAPACITANCE X9 CAPACITANCE TOLERANCE 006 DC VOLTAGE RATING AT +85 °C U CASE CODE W PACKAGING E3 RoHSCOMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % *X5 = ± 5 % * Special order This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Ratings and Case Codes table W = tape and reel Blank = ammo pack E3 = 100 % tin termination (RoHScompliant) Blank = SnPb termination DIMENSIONS Revision: 08-Feb-2023 Document Number: 40019 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000