199D
www.vishay.com
Vishay Sprague
Solid-Electrolyte TANTALEX™ Capacitors,
Resin-Coated, Radial-Lead
FEATURES
• Terminations: tin / lead (SnPb), 100 % tin (Sn)
• Economy and high performance are combined
Available
in
these
radial-lead,
solid-electrolyte
TANTALEX™ capacitors
Available
• Rugged, reliable capacitors featuring low
leakage current and low dissipation factor
• Six miniature case sizes and five lead styles. All case sizes
are available in standard tape and reel packaging per
EIA-468
• Standard ratings include replacements for type 196D
capacitors
• Lead (Pb)-free capacitors have “L” in body marking
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
Suitable for a broad range of consumer, commercial and
industrial equipment
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 °C, ± 20 %,
± 10 % standard. ± 5 % available as special
Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor,
shall not exceed the values listed in the Standard Ratings
tables.
DC Leakage Current (DCL Max.):
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings tables.
at +85 °C: leakage current shall not exceed 10 times the
values listed in the Standard Ratings tables.
at +125 °C: leakage shall not exceed 15 times the values
listed in the Standard Ratings tables.
Life Test: capacitors shall withstand rated DC voltage
applied at +85 °C for 1000 h with a circuit resistance not
greater than 3 .
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 10 %
ORDERING INFORMATION
199D
475
X9
003
A
1 (1)
V1
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
LEAD
STYLE
PACKAGING
RoHS
COMPLIANT
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
** X5 = ± 5 %
** Special Order
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
See
Ratings
and
Case
Codes
table.
V1 = Bulk
B1 = Tape and reel
A1 = Ammo
E3 = 100 %
tin termination
(RoHS compliant)
Blank = Tin / lead
termination
Note
(1) See lead styles table.
Revision: 25-Aug-16
Document Number: 40020
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
LEAD STYLE CONFIGURATIONS AND DIMENSIONS** (LL = Lead Length)
“LONG/SHORT” LL
1, 3 and Y
EVEN LL
2, 4 and 5
D
D
+
+
3±1
H
L
+
+
L
P
6.35 max.
D
+
+
H1
H
H
1.1 ± 0.05
L
H1
L
L
P
P
P
“HAIRPIN” X, Z
D
D
+
+
H
“SNAP- IN”
9
“OUTSIDE HOCKEYSTICK”
6 and 7
P
(1) - WIRE DIAMETER (NOMINAL) 0.020" [0.51 mm]
AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE
LEAD STYLE / CASE
1
2
Bulk
V1
Bulk
V1
Reel
B1
Ammo
A1
A
B
C
D
E
3
5
6
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
F
4
Bulk / Reel
Ammo
Bulk
V1
Reel
B1
Ammo
A1
7
9
X
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Y
Z
Bulk
V1
Bulk
V1
Reel
B1
Ammo
A1
DIMENSIONS in inches [millimeters]
LEAD STYLE
CASE
D
max.
A
0.173
[4.40]
B
0.197
[5.00]
C
0.217
[5.50]
D
0.236
[6.00]
E
0.339
[8.60]
F
0.378
[9.60]
Revision: 25-Aug-16
1, 2, 3, 4
P
± 0.024
[0.60]
H
max.
1, 2, 3
2, 4
L
min.
L
± 0.118
[3.0]
5, Y
P
± 0.03
[0.76]
6
L
± 0.118
[3.0]
P
± 0.024
[0.60]
0.280
[7.11]
0.100
[2.54]
0.400
[10.16]
0.200
[5.08]
0.492
[12.50]
0.650
[16.50]
L
0.378
[9.61]
0.300
[7.62]
0.360
[9.14]
H1
max.
0.125
[3.18]
0.591
[15.0]
0.398
[10.12]
0.748
[19.0]
0.748
[19.0]
0.200
[5.08]
-
0.458
[11.64]
0.240 ± 0.030
[6.1 ± 0.76]
0.498
[12.66]
-
0.591
[15.00]
-
0.748
[19.00]
1 ± 0.122
[25.4 ± 3.1]
Document Number: 40020
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
LEAD
STYLE
7, 9
CASE
D
max.
A
0.173
[4.40]
B
0.197
[5.00]
C
0.217
[5.50]
D
0.236
[6.00]
7
P
± 0.024
[0.60]
H1
max.
9
L
± 0.03
[0.76]
P
± 0.024
[0.60]
0.378
[9.61]
0.25
[6.35]
0.398
[10.12]
0.458
[11.64]
0.498
[12.66]
X, Z
H1
max.
L
± 0.03
[0.76]
0.398
[10.11]
0.240
[6.10]
0.200
[5.08]
0.418
[10.62]
0.478
[12.14]
0.518
[13.16]
0.240
[6.10]
D
max.
H
max.
H1
max.
0.173
[4.40]
0.280
[7.11]
0.340
[8.64]
0.197
[5.00]
0.300
[7.62]
0.360
[9.14]
0.217
[5.50]
0.360
[9.14]
0.420
[10.67]
0.236
[6.00]
0.400
[10.16]
0.460
[11.68]
X
Z
L
± 0.125
P
± 0.024
P
± 0.024
0.750
[19.05]
0.100
[2.54]
0.125
[3.175]
Note
• Lead space measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp.
199D OBSOLETE VS. CURRENT ORDERING CROSS REFERENCE
OBSOLETE
NEW
DESCRIPTION
A1
1V1
0.100 SP, UNEVEN STRAIGHT LL, BULK CASES A - D
A1
3V1
0.200 SP, UNEVEN STRAIGHT LL, BULK, CASES E, F
A1
2V1
0.100 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A6
2B1
0.100 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A6
2A1
0.100 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
A1
4V1
0.200 SP, EVEN STRAIGHT LL, BULK, CASES E, F
A6
4B1
0.200 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES E, F
A6
4A1
0.200 SP, EVEN STRAIGHT LL, AMMO, CASES E, F
A2
5V1
0.125 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A7
5B1
0.125 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A7
5A1
0.125 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
0.125 SP, UNEVEN STRAIGHT LL, BULK, CASES A - D
A2
YV1
B1
XV1
0.100 SP, HAIRPIN LL, BULK CASES A - D
B6
XB1
0.100 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B6
XA1
0.100 SP, HAIRPIN LL, AMMO, CASES A - D
B2
ZV1
0.125 SP, HAIRPIN LL, BULK, CASES A - D
B7
ZB1
0.125 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B7
ZA1
0.125 SP, HAIRPIN LL, AMMO, CASES A - D
E2
6V1
0.200 SP, HOCKEY STICK LL, BULK, CASES A - F
E7
6B1
0.200 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - F
E7
6A1
0.200 SP, HOCKEY STICK LL, AMMO, CASES A - F
E3
7V1
0.250 SP, HOCKEY STICK LL, BULK, CASES A - D
E8
7B1
0.250 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - D
E8
7A1
0.250 SP, HOCKEY STICK LL, AMMO, CASES A - D
G2
9V1
0.200 SP, SNAP-IN LL, BULK, CASES A - D
G7
9B1
0.200 SP, SNAP-IN LL, REEL POSITIVE LEADER, CASES A - D
G7
9A1
0.200 SP, SNAP-IN LL, AMMO, CASES A - D
E4
Revision: 25-Aug-16
OBSOLETE
Document Number: 40020
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
A
A
A
A
B
B
C
C
D
D
E
E
F
F
4.7
6.8
10
15
22
33
47
68
100
150
220
330
A
A
B
B
C
C
D
D
D
E
E
F
3.3
4.7
6.8
10
15
22
33
39
47
68
100
150
220
A
A
B
B
C
C
D
D
D
D
E
E
F
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
A
A
B
B
C
C
D
D
E
E
F
F
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
3 VDC AT +85 °C, SURGE = 3.6 V; 2 VDC AT +125 °C, SURGE = 2.4 V
199D475(1)003A(2)(3)
0.5
199D685(1)003A(2)(3)
0.5
199D106(1)003A(2)(3)
0.5
199D156(1)003A(2)(3)
0.5
199D226(1)003B(2)(3)
0.6
199D336(1)003B(2)(3)
1.0
199D476(1)003C(2)(3)
1.4
199D686(1)003C(2)(3)
2.0
199D107(1)003D(2)(3)
3.0
199D157(1)003D(2)(3)
4.0
199D227(1)003E(2)(3)
5.0
199D337(1)003E(2)(3)
6.0
199D477(1)003F(2)(3)
8.0
199D687(1)003F(2)(3)
10.0
6.3 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C, SURGE = 5 V
199D475(1)6R3A(2)(3)
0.5
199D685(1)6R3A(2)(3)
0.5
199D106(1)6R3B(2)(3)
0.6
199D156(1)6R3B(2)(3)
0.9
199D226(1)6R3C(2)(3)
1.3
199D336(1)6R3C(2)(3)
2.0
199D476(1)6R3D(2)(3)
2.9
199D686(1)6R3D(2)(3)
4.0
199D107(1)6R3D(2)(3)
5.0
199D157(1)6R3E(2)(3)
6.0
199D227(1)6R3E(2)(3)
7.0
199D337(1)6R3F(2)(3)
8.0
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V
199D335(1)010A(2)(3)
0.5
199D475(1)010A(2)(3)
0.5
199D685(1)010B(2)(3)
0.6
199D106(1)010B(2)(3)
1.0
199D156(1)010C(2)(3)
1.5
199D226(1)010C(2)(3)
2.0
199D336(1)010D(2)(3)
3.0
199D339(1)010D(2)(3)
3.9
199D476(1)010D(2)(3)
4.0
199D686(1)010D(2)(3)
5.0
199D107(1)010E(2)(3)
6.0
199D157(1)010E(2)(3)
7.0
199D227(1)010F(2)(3)
8.0
16 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C, SURGE = 12 V
199D225(1)016A(2)(3)
0.5
199D335(1)016A(2)(3)
0.5
199D475(1)016B(2)(3)
0.7
199D685(1)016B(2)(3)
1.0
199D106(1)016C(2)(3)
1.5
199D156(1)016C(2)(3)
2.4
199D226(1)016D(2)(3)
3.5
199D336(1)016D(2)(3)
4.0
199D476(1)016E(2)(3)
5.0
199D686(1)016E(2)(3)
6.0
199D107(1)016F(2)(3)
7.0
199D157(1)016F(2)(3)
8.0
MAX. DF
AT +25 °C
120 Hz (%)
6
6
8
8
8
8
8
8
10
10
10
10
10
10
6
6
8
8
8
8
8
8
10
10
10
10
6
6
6
8
8
8
8
8
8
8
10
10
10
6
6
6
6
8
8
8
8
8
8
10
10
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination.
Revision: 25-Aug-16
Document Number: 40020
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
1.0
3.3
4.7
6.8
10
15
22
33
47
68
100
A
B
B
C
C
D
D
E
E
F
F
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
A
A
A
B
B
C
C
D
D
E
E
F
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
1.8
2.2
3.3
4.7
6.8
10
15
22
33
47
A
A
A
A
A
A
A
A
B
B
B
C
D
D
E
E
F
F
0.10
0.15
0.22
0.33
0.47
0.68
A
A
A
A
A
A
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C, SURGE = 16 V
199D105(1)020A(2)(3)
0.5
199D335(1)020B(2)(3)
0.8
199D475(1)020B(2)(3)
1.0
199D685(1)020C(2)(3)
1.5
199D106(1)020C(2)(3)
2.0
199D156(1)020D(2)(3)
2.5
199D226(1)020D(2)(3)
3.0
199D336(1)020E(2)(3)
4.0
199D476(1)020E(2)(3)
5.0
199D686(1)020F(2)(3)
6.0
199D107(1)020F(2)(3)
7.0
25 VDC AT +85 °C, SURGE = 33 V; 17 VDC AT +125 °C, SURGE = 21 V
199D105(1)025A(2)(3)
0.5
199D155(1)025A(2)(3)
0.5
199D225(1)025A(2)(3)
0.5
199D335(1)025B(2)(3)
0.8
199D475(1)025B(2)(3)
1.0
199D685(1)025C(2)(3)
1.5
199D106(1)025C(2)(3)
2.5
199D156(1)025D(2)(3)
3.0
199D226(1)025D(2)(3)
4.0
199D336(1)025E(2)(3)
5.0
199D476(1)025E(2)(3)
6.0
199D686(1)025F(2)(3)
7.0
35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C, SURGE = 28 V
199D104(1)035A(2)(3)
0.5
199D154(1)035A(2)(3)
0.5
199D224(1)035A(2)(3)
0.5
199D334(1)035A(2)(3)
0.5
199D474(1)035A(2)(3)
0.5
199D684(1)035A(2)(3)
0.5
199D105(1)035A(2)(3)
0.5
199D155(1)035A(2)(3)
0.5
199D185(1)035B(2)(3)
0.7
199D225(1)035B(2)(3)
0.7
199D335(1)035B(2)(3)
1.0
199D475(1)035C(2)(3)
1.5
199D685(1)035D(2)(3)
2.3
199D106(1)035D(2)(3)
3.5
199D156(1)035E(2)(3)
4.0
199D226(1)035E(2)(3)
5.0
199D336(1)035F(2)(3)
6.0
199D476(1)035F(2)(3)
7.0
50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C, SURGE = 40 V
199D104(1)050A(2)(3)
0.5
199D154(1)050A(2)(3)
0.5
199D224(1)050A(2)(3)
0.5
199D334(1)050A(2)(3)
0.5
199D474(1)050A(2)(3)
0.5
199D684(1)050A(2)(3)
0.5
MAX. DF
AT +25 °C
120 Hz (%)
4
6
6
6
8
8
8
8
8
8
10
4
6
6
6
6
6
8
8
8
8
8
8
4
4
4
4
4
4
4
6
6
6
6
6
6
8
8
8
8
8
4
4
4
4
4
4
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination.
Revision: 25-Aug-16
Document Number: 40020
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
B
C
C
D
D
F
F
F
F
MAX. DCL
AT +25 °C
(μA)
PART NUMBER
MAX. DF
AT +25 °C
120 Hz (%)
50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C, SURGE = 40 V
199D105(1)050B(2)(3)
0.5
199D155(1)050C(2)(3)
0.7
199D225(1)050C(2)(3)
1.1
199D335(1)050D(2)(3)
1.5
199D475(1)050D(2)(3)
2.0
199D685(1)050F(2)(3)
3.0
199D106(1)050F(2)(3)
4.0
199D156(1)050F(2)(3)
5.0
199D226(1)050F(2)(3)
6.0
4
6
6
6
6
6
8
8
8
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination.
STANDARD REEL PACKAGING SPECIFICATIONS PER EIA-468 in inches [millimeters]
LEAD CONFIGURATION 6.7
LEAD CONFIGURATION 2, 4, 5
LEAD CONFIGURATION X, Z
1.270 [32.26]
MAX.
0.118 [3.0]
MAX.
0.0354 + 0.030 - 0.020
[8.99 + 0.762 - 0.508]
0.630 ± 0.020
[16.0 ± 0.508]
0.728 ± 0.020
[18.49 ± 0.508]
ADHESIVE TAPE
LEAD DIAMETER
0.500 ± 0.012
[12.70 ± 0.305]
CARRIER TAPE
SEE LEAD STYLE/SPACING
TABLE FOR LEAD SPACING
CASE CODE
OBSOLETE
A, B, C, D
A1, A6
A, B, C, D
B1, B6
A, B, C,
D, E, F
E2, E7
LEAD STYLE
LEAD SPACING
1V1 (Bulk),
2B1 (T and R)
XV1 (Bulk),
XB1 (T and R)
6V1 (Bulk),
6B1 (T and R)
0.100 + 0.024 / - 0.016
[2.54 + 0.60 / - 0.40]
0.100 + 0.024 / - 0.016
[2.54 + 0.60 / - 0.40]
0.200 + 0.024 / - 0.016
[5.08 + 0.06 / - 0.40]
LL MIN.
(BULK)
0.187 [4.7]
0.187 [4.7]
0.187 [4.7]
Note
• Lead space measured within 0.05" [1.27 mm] of the body of the capacitor, or from the bottom of the crimp. Lead Style “A” may be supplied
with 0.59" [15 mm] anode lead and 0.47" [12 mm] cathode lead.
Tape and Reel Packaging: type 199D radial-leaded tantalum capacitors, all lead styles except 1, 3, and Y are available taped
and reeled per EIA-468.
CASE CODE
Quantity per box bulk
Quantity per box ammopack
Quantity per reel
Revision: 25-Aug-16
A
B
C
1000
2500
D
500
2000
1500
1000
1000
E
F
100
500
500
Document Number: 40020
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000