199D685X0035D1V1E3

199D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX™ Capacitors, Resin-Coated, Radial-Lead FEATURES • Terminations: tin / lead (SnPb), 100 % tin (Sn) • Economy and high performance are combined Available in these radial-lead, solid-electrolyte TANTALEX™ capacitors • Rugged, reliable capacitors featuring low Available leakage current and low dissipation factor • Six miniature case sizes and five lead styles. All case sizes are available in standard tape and reel packaging per EIA-468 • Standard ratings include replacements for type 196D capacitors • Lead (Pb)-free capacitors have “L” in body marking • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS Suitable for a broad range of consumer, commercial and industrial equipment PERFORMANCE CHARACTERISTICS Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Tolerance: at 120 Hz, +25 °C, ± 20 %, ± 10 % standard. ± 5 % available as special Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor, shall not exceed the values listed in the Standard Ratings tables. DC Leakage Current (DCL Max.): at +25 °C: leakage current shall not exceed the values listed in the Standard Ratings tables. at +85 °C: leakage current shall not exceed 10 times the values listed in the Standard Ratings tables. at +125 °C: leakage shall not exceed 15 times the values listed in the Standard Ratings tables. Life Test: capacitors shall withstand rated DC voltage applied at +85 °C for 1000 h with a circuit resistance not greater than 3 Ω. Following the life test: 1. DCL shall not exceed 125 % of the initial requirements 2. Dissipation factor shall meet the initial requirement 3. Change in capacitance shall not exceed ± 10 % ORDERING INFORMATION 199D 475 X9 003 A 1 (1) V1 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C CASE CODE LEAD STYLE PACKAGING RoHSCOMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % ** X5 = ± 5 % ** Special Order This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table. V1 = bulk B1 = tape and reel A1 = tape / ammo box E3 = 100 % tin termination (RoHS-compliant) Blank = tin / lead termination Note (1) See lead styles table Revision: 08-Feb-2023 Document Number: 40020 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Vishay Sprague LEAD STYLE CONFIGURATIONS AND CODES STRAIGHT UNEVEN LEADS CODES 1, 3, AND Y STRAIGHT EVEN LEADS CODES 2, 4, AND 5 D D + + 3±1 H “OUTSIDE HOCKEY STICK” CODES 6 AND 7 + + H1 1.1 ± 0.05 L P P 6.35 max. D + + L L “HAIRPIN” CODES X, Z D D + + H “SNAP-IN” CODE 9 H H L P H1 L P P Notes • Wire diameter (nominal) 0.020" (0.51 mm) • L = lead length • P = pitch or lead spacing AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE LEAD STYLE / CASE 1 2 3 4 5 6 Bulk Bulk Reel Ammo - - Bulk Reel Ammo - Bulk 7 9 X Y Z Bulk Reel Ammo Bulk Reel Ammo Bulk Reel Ammo Bulk Bulk Reel Ammo - - - - - A B C D E F Bulk / Reel Ammo Bulk Reel Ammo - DIMENSIONS FOR LEAD STYLES 1, 2, 3, 4, 5, Y, 6 in inches [millimeters] LEAD STYLE 1, 2, 3, 4 1, 3 2, 4 5, Y 6 CASE D (max.) P (1) ± 0.024 [0.60] H (max.) L (2) (min.) L (2) ± 0.118 [3.0] P (1) ± 0.03 [0.76] L (2) ± 0.118 [3.0] P (1) ± 0.024 [0.60] H1 (max.) L (2) A 0.173 [4.40] 0.100 [2.54] 0.280 [7.11] 0.591 [15.0] 0.748 [19.0] 0.125 [3.18] 0.748 [19.0] 0.200 [5.08] 0.378 [9.61] 0.240 ± 0.030 [6.1 ± 0.76] B 0.197 [5.00] 0.100 [2.54] 0.300 [7.62] 0.591 [15.0] 0.748 [19.0] 0.125 [3.18] 0.748 [19.0] 0.200 [5.08] 0.398 [10.11] 0.240 ± 0.030 [6.1 ± 0.76] C 0.217 [5.50] 0.100 [2.54] 0.360 [9.14] 0.591 [15.0] 0.748 [19.0] 0.125 [3.18] 0.748 [19.0] 0.200 [5.08] 0.458 [11.64] 0.240 ± 0.030 [6.1 ± 0.76] D 0.236 [6.00] 0.100 [2.54] 0.400 [10.16] 0.591 [15.0] 0.748 [19.0] 0.125 [3.18] 0.748 [19.0] 0.200 [5.08] 0.498 [12.66] 0.240 ± 0.030 [6.1 ± 0.76] E 0.339 [8.60] 0.200 [5.08] 0.492 [12.50] 0.591 [15.0] 0.748 [19.0] n/a n/a 0.200 [5.08] 0.591 [15.00] 1.0 ± 0.122 [25.4 ± 3.1] F 0.378 [9.60] 0.200 [5.08] 0.650 [16.50] 0.591 [15.0] 0.748 [19.0] n/a n/a 0.200 [5.08] 0.748 [19.00] 1.0 ± 0.122 [25.4 ± 3.1] Notes (1) Pitch or lead spacing P measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp (2) Lead length L is for bulk packaging Revision: 08-Feb-2023 Document Number: 40020 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Vishay Sprague DIMENSIONS FOR LEAD STYLES 7, 9, X, Z in inches [millimeters] LEAD STYLE 7 9 H1 max. L (2) ± 0.03 [0.76] P (1) ± 0.024 [0.60] X, Z H1 max. L (2) ± 0.03 [0.76] D max. H max. X Z H1 max. L (2) ± 0.125 [3.175] P (1) ± 0.024 [0.60] P (1) ± 0.024 [0.60] CASE D max. P (1) ± 0.024 [0.60] A 0.173 [4.40] 0.25 [6.35] 0.378 [9.61] 0.240 ± 0.030 [6.1 ± 0.76] 0.200 [5.08] 0.398 [10.11] 0.240 [6.10] 0.173 [4.40] 0.280 [7.11] 0.340 [8.64] 0.750 [19.05] 0.100 [2.54] 0.125 [3.175] B 0.197 [5.00] 0.25 [6.35] 0.398 0.240 ± 0.030 [10.12] [6.1 ± 0.76] 0.200 [5.08] 0.418 [10.62] 0.240 [6.10] 0.197 [5.00] 0.300 [7.62] 0.360 [9.14] 0.750 [19.05] 0.100 [2.54] 0.125 [3.175] C 0.217 [5.50] 0.25 [6.35] 0.458 0.240 ± 0.030 [11.64] [6.1 ± 0.76] 0.200 [5.08] 0.478 [12.14] 0.240 [6.10] 0.217 [5.50] 0.360 [9.14] 0.420 [10.67] 0.750 [19.05] 0.100 [2.54] 0.125 [3.175] D 0.236 [6.00] 0.25 [6.35] 0.498 0.240 ± 0.030 [12.66] [6.1 ± 0.76] 0.200 [5.08] 0.518 [13.16] 0.240 [6.10] 0.236 [6.00] 0.400 [10.16] 0.460 [11.68] 0.750 [19.05] 0.100 [2.54] 0.125 [3.175] Notes (1) Pitch or lead spacing P measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp (2) Lead length L is for bulk packaging 199D OBSOLETE VS. CURRENT ORDERING CROSS REFERENCE OBSOLETE NEW DESCRIPTION A1 1V1 PITCH 0.100, UNEVEN STRAIGHT LEADS, BULK CASES A - D A1 3V1 PITCH 0.200, UNEVEN STRAIGHT LEADS, BULK, CASES E, F A1 2V1 PITCH 0.100, EVEN STRAIGHT LEADS, BULK, CASES A - D A6 2B1 PITCH 0.100, EVEN STRAIGHT LEADS, REEL POSITIVE LEADER, CASES A - D A6 2A1 PITCH 0.100, EVEN STRAIGHT LEADS, AMMO, CASES A - D A1 4V1 PITCH 0.200, EVEN STRAIGHT LEADS, BULK, CASES E, F A6 4B1 PITCH 0.200, EVEN STRAIGHT LEADS, REEL POSITIVE LEADER, CASES E, F A6 4A1 PITCH 0.200, EVEN STRAIGHT LEADS, AMMO, CASES E, F A2 5V1 PITCH 0.125, EVEN STRAIGHT LEADS, BULK, CASES A - D A7 5B1 PITCH 0.125, EVEN STRAIGHT LEADS, REEL POSITIVE LEADER, CASES A - D A7 5A1 PITCH 0.125, EVEN STRAIGHT LEADS, AMMO, CASES A - D PITCH 0.125, UNEVEN STRAIGHT LEADS, BULK, CASES A - D A2 YV1 B1 XV1 PITCH 0.100, HAIRPIN LEADS, BULK CASES A - D B6 XB1 PITCH 0.100, HAIRPIN LEADS, REEL POSITIVE LEADER, CASES A - D B6 XA1 PITCH 0.100, HAIRPIN LEADS, AMMO, CASES A - D B2 ZV1 PITCH 0.125, HAIRPIN LEADS, BULK, CASES A - D B7 ZB1 PITCH 0.125, HAIRPIN LEADS, REEL POSITIVE LEADER, CASES A - D B7 ZA1 PITCH 0.125, HAIRPIN LEADS, AMMO, CASES A - D E2 6V1 PITCH 0.200, HOCKEY STICK LEADS, BULK, CASES A - F E7 6B1 PITCH 0.200, HOCKEY STICK LEADS, REEL POSITIVE LEADER, CASES A - F E7 6A1 PITCH 0.200, HOCKEY STICK LEADS, AMMO, CASES A - F E3 7V1 PITCH 0.250, HOCKEY STICK LEADS, BULK, CASES A - D E8 7B1 PITCH 0.250, HOCKEY STICK LEADS, REEL POSITIVE LEADER, CASES A - D E8 7A1 PITCH 0.250, HOCKEY STICK LEADS, AMMO, CASES A - D G2 9V1 PITCH 0.200, SNAP-IN LEADS, BULK, CASES A - D G7 9B1 PITCH 0.200, SNAP-IN LEADS, REEL POSITIVE LEADER, CASES A - D G7 9A1 PITCH 0.200, SNAP-IN LEADS, AMMO, CASES A - D E4 Revision: 08-Feb-2023 OBSOLETE Document Number: 40020 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) 3 VDC AT +85 °C, SURGE = 3.6 V; 2 VDC AT +125 °C, SURGE = 2.4 V 4.7 A 199D475(1)003A(2)(3) 0.5 6 6.8 A 199D685(1)003A(2)(3) 0.5 6 10 A 199D106(1)003A(2)(3) 0.5 8 15 A 199D156(1)003A(2)(3) 0.5 8 22 B 199D226(1)003B(2)(3) 0.6 8 33 B 199D336(1)003B(2)(3) 1.0 8 47 C 199D476(1)003C(2)(3) 1.4 8 68 C 199D686(1)003C(2)(3) 2.0 8 100 D 199D107(1)003D(2)(3) 3.0 10 150 D 199D157(1)003D(2)(3) 4.0 10 220 E 199D227(1)003E(2)(3) 5.0 10 330 E 199D337(1)003E(2)(3) 6.0 10 470 F 199D477(1)003F(2)(3) 8.0 10 680 F 199D687(1)003F(2)(3) 10.0 10 6.3 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C, SURGE = 5 V 4.7 A 199D475(1)6R3A(2)(3) 0.5 6 6.8 A 199D685(1)6R3A(2)(3) 0.5 6 10 B 199D106(1)6R3B(2)(3) 0.6 8 15 B 199D156(1)6R3B(2)(3) 0.9 8 22 C 199D226(1)6R3C(2)(3) 1.3 8 33 C 199D336(1)6R3C(2)(3) 2.0 8 47 D 199D476(1)6R3D(2)(3) 2.9 8 68 D 199D686(1)6R3D(2)(3) 4.0 8 100 D 199D107(1)6R3D(2)(3) 5.0 10 150 E 199D157(1)6R3E(2)(3) 6.0 10 220 E 199D227(1)6R3E(2)(3) 7.0 10 330 F 199D337(1)6R3F(2)(3) 8.0 10 10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V 3.3 A 199D335(1)010A(2)(3) 0.5 6 4.7 A 199D475(1)010A(2)(3) 0.5 6 6.8 B 199D685(1)010B(2)(3) 0.6 6 10 B 199D106(1)010B(2)(3) 1.0 8 15 C 199D156(1)010C(2)(3) 1.5 8 22 C 199D226(1)010C(2)(3) 2.0 8 33 D 199D336(1)010D(2)(3) 3.0 8 39 D 199D396(1)010D(2)(3) 3.9 8 47 D 199D476(1)010D(2)(3) 4.0 8 68 D 199D686(1)010D(2)(3) 5.0 8 100 E 199D107(1)010E(2)(3) 6.0 10 150 E 199D157(1)010E(2)(3) 7.0 10 220 F 199D227(1)010F(2)(3) 8.0 10 Note • Part number definitions: (1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 % (2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table (3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination Revision: 08-Feb-2023 Document Number: 40020 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) 16 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C, SURGE = 12 V 2.2 A 199D225(1)016A(2)(3) 0.5 6 3.3 A 199D335(1)016A(2)(3) 0.5 6 4.7 B 199D475(1)016B(2)(3) 0.7 6 6.8 B 199D685(1)016B(2)(3) 1.0 6 10 C 199D106(1)016C(2)(3) 1.5 8 15 C 199D156(1)016C(2)(3) 2.4 8 22 D 199D226(1)016D(2)(3) 3.5 8 33 D 199D336(1)016D(2)(3) 4.0 8 47 E 199D476(1)016E(2)(3) 5.0 8 68 E 199D686(1)016E(2)(3) 6.0 8 100 F 199D107(1)016F(2)(3) 7.0 10 150 F 199D157(1)016F(2)(3) 8.0 10 20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C, SURGE = 16 V 1.0 A 199D105(1)020A(2)(3) 0.5 4 2.7 B 199D275(1)020B(2)(3) 0.7 6 3.3 B 199D335(1)020B(2)(3) 0.8 6 4.7 B 199D475(1)020B(2)(3) 1.0 6 6.8 C 199D685(1)020C(2)(3) 1.5 6 10 C 199D106(1)020C(2)(3) 2.0 8 15 D 199D156(1)020D(2)(3) 2.5 8 22 D 199D226(1)020D(2)(3) 3.0 8 33 E 199D336(1)020E(2)(3) 4.0 8 47 E 199D476(1)020E(2)(3) 5.0 8 68 F 199D686(1)020F(2)(3) 6.0 8 100 F 199D107(1)020F(2)(3) 7.0 10 25 VDC AT +85 °C, SURGE = 33 V; 17 VDC AT +125 °C, SURGE = 21 V 1.0 A 199D105(1)025A(2)(3) 0.5 4 1.5 A 199D155(1)025A(2)(3) 0.5 6 2.2 A 199D225(1)025A(2)(3) 0.5 6 3.3 B 199D335(1)025B(2)(3) 0.8 6 4.7 B 199D475(1)025B(2)(3) 1.0 6 6.8 C 199D685(1)025C(2)(3) 1.5 6 10 C 199D106(1)025C(2)(3) 2.5 8 15 D 199D156(1)025D(2)(3) 3.0 8 22 D 199D226(1)025D(2)(3) 4.0 8 33 E 199D336(1)025E(2)(3) 5.0 8 47 E 199D476(1)025E(2)(3) 6.0 8 68 F 199D686(1)025F(2)(3) 7.0 8 Note • Part number definitions: (1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 % (2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table (3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination Revision: 08-Feb-2023 Document Number: 40020 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) 35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C, SURGE = 28 V 0.10 A 199D104(1)035A(2)(3) 0.5 4 0.15 A 199D154(1)035A(2)(3) 0.5 4 0.22 A 199D224(1)035A(2)(3) 0.5 4 0.33 A 199D334(1)035A(2)(3) 0.5 4 0.47 A 199D474(1)035A(2)(3) 0.5 4 0.68 A 199D684(1)035A(2)(3) 0.5 4 1.0 A 199D105(1)035A(2)(3) 0.5 4 1.5 A 199D155(1)035A(2)(3) 0.5 6 1.8 B 199D185(1)035B(2)(3) 0.7 6 2.2 B 199D225(1)035B(2)(3) 0.7 6 6 3.3 B 199D335(1)035B(2)(3) 1.0 4.7 C 199D475(1)035C(2)(3) 1.5 6 5.6 D 199D565(1)035D(2)(3) 1.9 6 6.8 D 199D685(1)035D(2)(3) 2.3 6 10 D 199D106(1)035D(2)(3) 3.5 8 15 E 199D156(1)035E(2)(3) 4.0 8 22 E 199D226(1)035E(2)(3) 5.0 8 33 F 199D336(1)035F(2)(3) 6.0 8 47 F 199D476(1)035F(2)(3) 7.0 8 0.10 A 199D104(1)050A(2)(3) 0.5 4 0.15 A 199D154(1)050A(2)(3) 0.5 4 0.22 A 199D224(1)050A(2)(3) 0.5 4 0.33 A 199D334(1)050A(2)(3) 0.5 4 0.47 A 199D474(1)050A(2)(3) 0.5 4 0.68 A 199D684(1)050A(2)(3) 0.5 4 50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C, SURGE = 40 V 1.0 B 199D105(1)050B(2)(3) 0.5 4 1.5 C 199D155(1)050C(2)(3) 0.7 6 2.2 C 199D225(1)050C(2)(3) 1.1 6 3.3 D 199D335(1)050D(2)(3) 1.5 6 4.7 D 199D475(1)050D(2)(3) 2.0 6 6.8 F 199D685(1)050F(2)(3) 3.0 6 10 F 199D106(1)050F(2)(3) 4.0 8 15 F 199D156(1)050F(2)(3) 5.0 8 22 F 199D226(1)050F(2)(3) 6.0 8 Note • Part number definitions: (1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 % (2) To specify lead style / spacing / packaging insert the last three characters in the part number. Use the appropriate code shown in the Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table (3) E3 = RoHS-compliant 100 % tin leads. Blank or no suffix = standard tin / lead termination Revision: 08-Feb-2023 Document Number: 40020 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 199D www.vishay.com Revision: 08-Feb-2023 Vishay Sprague Document Number: 40020 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000