1N4150W
www.vishay.com
Vishay Semiconductors
Small Signal Fast Switching Diode
FEATURES
• Silicon epitaxial planar diode
• For general purpose and switching
• AEC-Q101 qualified
• Base P/N-E3 - RoHS-compliant, commercial
grade
• Base P/N-HE3 - RoHS-compliant, AEC-Q101
qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: SOD-123
Weight: approx. 10.3 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
PARTS TABLE
PART
1N4150W
ORDERING CODE
TYPE MARKING
INTERNAL CONSTRUCTION
REMARKS
A4
Single diode
Tape and reel
1N4150W-E3-08 or 1N4150W-E3-18
1N4150W-HE3-08 or 1N4150W-HE3-18
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
Repetitive peak reverse voltage
TEST CONDITION
VRRM
50
UNIT
V
Maximum average forward rectified current
IF(AV)
200
mA
Maximum power dissipation (1)
Ptot
410
mW
SYMBOL
VALUE
UNIT
RthJA
375
K/W
Tj
150
°C
Storage temperature range
Tstg
- 65 to + 150
°C
Operating temperature range
Top
- 55 to + 150
°C
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air
TEST CONDITION
(1)
Maximum junction temperature
Note
(1) Valid provided that electrodes are kept at ambient temperature.
Rev. 1.4, 08-May-13
Document Number: 85720
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N4150W
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
MAX.
UNIT
IF = 1 mA
VF
0.540
0.620
V
IF = 10 mA
VF
0.660
0.740
V
IF = 50 mA
VF
0.760
0.860
V
IF = 100 mA
VF
0.820
0.920
V
IF = 200 mA
VF
0.870
1
V
Forward voltage
Reverse current
Diode capacitance
Reverse recovery time
TYP.
VR = 50 V
IR
100
nA
VR = 50 V, Tj = 150 °C
IR
100
μA
VR = 0, f = 1 MHz, VHF = 50 mV
CD
2.5
pF
IF = IR = (10 to 100) mA
iR = 0.1 x IR, RL = 100
trr
4
ns
0.10 (0.004)
0.15 (0.006)
8°
0.45 (0.018)
0.25 (0.010)
0° to
0.2 (0.008)
1 (0.039)
1.35 (0.053)
0.1 (0.004) max.
PACKAGE DIMENSIONS in millimeters (inches): SOD-123
0.5 (0.020) ref.
Cathode bar
Mounting Pad Layout
2.85 (0.112)
2.55 (0.100)
0.85 (0.033)
2.5 (0.098)
0.85 (0.033)
3.55 (0.140)
1.7 (0.067)
3.85 (0.152)
1.40 (0.055)
0.45 (0.018)
0.65 (0.026)
0.85 (0.033)
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Rev. 1.4, 08-May-13
Document Number: 85720
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000