1N6481-E3/96

1N6478, 1N6479, 1N6480, 1N6481, 1N6482, 1N6483, 1N6484 www.vishay.com Vishay General Semiconductor Surface-Mount Glass Passivated Junction Rectifier FEATURES • Superectifier structure for high reliability condition Superectifier® • Ideal for automated placement • Low forward voltage drop • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C GL41 (DO-213AB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 30 A IR 10 μA For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. MECHANICAL DATA VF 1.1 V TJ max. 175 °C Package GL41 (DO-213AB) Circuit configuration Single Case: GL41 (DO-213AB), molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER STANDARD RECOVERY DEVICE: 1ST BAND IS WHITE SYMBOL 1N6478 1N6479 1N6480 1N6481 1N6482 1N6483 1N6484 Polarity color bands (2nd band) UNIT Gray Red Orange Yellow Green Blue Violet Max. repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Max. RMS voltage VRMS 35 70 140 280 420 560 700 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 V V Max. average forward rectified current IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Max. full load reverse current, full cycle average at TA = 75 °C IR(AV) 100 μA TJ, TSTG -65 to +175 °C Operating junction and storage temperature range Revision: 20-May-2022 Document Number: 88527 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N6478, 1N6479, 1N6480, 1N6481, 1N6482, 1N6483, 1N6484 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Max. instantaneous forward voltage 1.0 A Max. DC reverse current at rated DC blocking voltage SYMBOL 1N6478 TA = 25 °C 1N6479 1N6480 1N6483 1N6484 UNIT V 1.0 TA = 25 °C 10 IR TA = 125 °C Typical junction capacitance 1N6482 1.1 VF TA = 75 °C 1N6481 4.0 V, 1 MHz μA 200 8.0 CJ pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL 1N6478 Max. thermal resistance 1N6479 1N6480 1N6481 RθJA (1) 50 RθJT (2) 20 1N6482 1N6483 1N6484 UNIT °C/W Notes (1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1N6482-E3/96 PREFERRED P/N 0.114 96 1500 7" diameter plastic tape and reel 1N6482-E3/97 0.114 97 5000 13" diameter plastic tape and reel Revision: 20-May-2022 Document Number: 88527 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N6478, 1N6479, 1N6480, 1N6481, 1N6482, 1N6483, 1N6484 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Instantaneous Reverse Current (mA) Average Forward Current (A) 1.0 60 Hz Resistive or Inductive Load 0.8 0.6 0.4 0.2 0.1 TJ = 25 °C 0.01 0 0 25 50 75 100 125 150 0 175 20 40 60 80 Terminal Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics TA = 75 °C 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) 25 20 15 10 5.0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0 100 10 1 100 10 1 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 10 Instantaneous Forward Current (A) 100 100 30 Peak Forward Surge Current (A) TJ = 100 °C 1 Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 1 Mounted on 0.20" x 0.27" (5 mm x 7 mm) Copper Pad Areas 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 20-May-2022 Document Number: 88527 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N6478, 1N6479, 1N6480, 1N6481, 1N6482, 1N6483, 1N6484 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GL41 (DO-213AB) Solderable Ends 1st Band Mounting Pad Layout D2 = D1 +- 00.008 (0.20) 0.138 (3.5) MAX. D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Revision: 20-May-2022 Document Number: 88527 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000