200HF80PV

Bulletin I2020 rev. A 07/94 200HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features 200 A High current carrying capability High surge current capability Types up to 1200V V RRM Stud cathode and stud anode version Standard JEDEC types Diffused junction Typical Applications Battery chargers Converters Power supplies Machine tool controls Major Ratings and Characteristics Parameters 200HF(R) Units 200 A 125 °C 314 A @ 50Hz 4400 A @ 60Hz 4610 A @ 50Hz 97 KA2s @ 60Hz 88 KA2s 400 to 1200 V -40 to 180 °C I F(AV) @ TC I F(RMS) I FSM I 2t VRRM range TJ www.irf.com case style DO-205AC (DO-30) 1 200HF(R) Series Bulletin I2020 rev. A 07/94 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage V RRM , maximum repetitive VRSM , maximum non- IRRM max. Code peak reverse voltage V repetitive peak rev. voltage V @ 180°C 40 400 500 Type number 200HF(R) 80 800 900 120 1200 1300 mA 15 Forward Conduction Parameter IF(AV) I 2t Units Conditions Max. average forward current 200 A @ Case temperature 125 °C 314 A IF(RMS) Max. RMS forward current IFSM 200HF(R) 4400 t = 10ms No voltage non-repetitive surge current 4610 t = 8.3ms reapplied 100% VRRM Maximum I2t for fusing A 3700 t = 10ms 3870 t = 8.3ms reapplied Sinusoidal half wave, 97 t = 10ms No voltage Initial TJ = TJ max 88 t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied KA2s 62 Maximum I2√t for fusing V F(TO)1 Low level value of threshold 968 V F(TO)2 High level value of threshold KA2√s V (I > π x IF(AV)), TJ = TJ max. 1.04 voltage Low level value of forward High level value of forward slope resistance VFM 2 Max. forward voltage drop (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.85 slope resistance r f2 t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.85 voltage r f1 DC @ 120°C case temperature Max. peak, one-cycle forward, 68 I 2√ t 180° conduction, half sine wave mΩ (I > π x IF(AV)), TJ = TJ max. 0.59 1.45 V Ipk= 628A, TJ = 25 °C www.irf.com 200HF(R) Series Bulletin I2020 rev. A 07/94 Thermal and Mechanical Specification Parameter 200HF(R) TJ Max. operating temperature range -40 to 180 Tstg Max. storage temperature range -55 to 180 RthJC Max. thermal resistance, junction to case 0.17 RthCS Max. thermal resistance, case to heatsink 0.08 T Max. allowed mounting torque +0 -20% 11 wt Approximate weight 120 Units Conditions °C DC operation K/W Mounting surface, smooth, flat and greased Not lubricated threads Nm 10 Case style Lubricated threads g DO-205AC(DO-30) See Outline Table ∆RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction 180° 0.045 Rectangular conduction Units 0.037 120° 0.056 0.061 90° 0.073 0.079 60° 0.102 0.105 30° 0.154 0.156 Conditions T J = TJ max. K/W Ordering Information Table Device Code 200 HF 1 2 R 120 P B V 3 4 5 6 7 1 - Essential Part Number 2 - Diode 3 - None = Stud Normal Polarity (Cathode to Stud) 4 - Voltage code: Code x 10 = VRRM (See Voltage Ratings table) 5 - P = Stud base DO-205AC(DO-30) 1/2" 20UNF-2A R = Stud Reverse Polarity (Anode to Stud) M= Stud base DO-205AC(DO-30) M12x1.75 6 - B = Flag top terminals (for Cathode/ Anode Leads) S = Isolated lead with silicone sleeve (Red = Reverse Polarity; Blue = Normal Polarity) None = Not isolated lead 7 www.irf.com - V = Glass-metal seal 3 200HF(R) Series Bulletin I2020 rev. A 07/94 Outline Table GLASS-METAL SEAL 16.5 (0.65) 2.6 (0.10) MAX. 35 (1.38) MAX. 6.5 (0.26) MIN. MAX. C.S. 16mm 170 (6.69) 2 (0.015 s.i.) SW 27 12.5 ( 0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 55 (2.16) MIN. 157 (6.18) DIA. 8.5 (0.33) NOM. Conforms to JEDEC DO-205AC (DO-30) All dimensions in millimeters (inches) 1/2"-20UNF-2A* * FOR METRIC DEVICE: M12 X 1.75 GLASS-METAL SEAL 16.5 (0.65) 5.6 (0.22) 9.5 (0.37) 36.5 (1.44) 12.5 (0.49) MAX. 24 (0.94) MAX. DIA. 23.5 (0.93) MAX. 21 (0.82) MAX. 41 (1.61) MA X. DIA. 5.54 (0.22) 1/2"-20UNF-2A* 4 27 (1.06) DO-205AC (DO-30) Flag All dimensions in millimeters (inches) 2.4 (0.09) *FOR METRIC DEVICE. M12 X 1.75 www.irf.com 200HF(R) Series 180 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Bulletin I2020 rev. A 07/94 200HF(R) Series R thJC (DC) = 0.17 K/W 170 160 Conduction Angle 150 30° 140 60° 90° 120° 130 180° 120 0 25 50 75 100 125 150 175 200 225 180 200HF(R) Series R thJC (DC) = 0.17 K/W 170 160 Conduction Period 150 140 130 90° 120 60° 180° DC 110 0 50 Average Forward Current (A) 100 150 200 250 300 350 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 300 W K/ R thSA 0.2 W K .1 =0 K/ W /W 1 .5 R 0. 8 a elt -D K/ W 1K 100 W 5 0. 6 RMS Limit 150 K/ 200 0. K/ 250 3 0. 180° 120° 90° 60° 30° 4 0. Maximum Average Forward Power Loss (W) 120° 30° K/ W /W K/W Conduction Angle 2.5 K /W 50 4 K/W 200HF(R) Series T J = 180°C 0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Average Forward Current (A) 400 4K /W -D a elt K/ W R 200 W W K/ 0.6 K/ 0.1 0 .5 = 0. SA 250 0.3 W K/ 300 R th DC 180° 120° 90° 60° 30° 350 2 0. Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics K/ W 0.8 K/ W 1K /W 150 RMS Limit Conduction Period 100 200HF(R) Series TJ = 180°C 50 1 .5 K /W 2.5 K/ W 4 K/W 0 0 50 100 150 200 250 300 Average Forward Current (A) 350 0 20 40 60 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics www.irf.com 5 200HF(R) Series 4000 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Bulletin I2020 rev. A 07/94 At Any Rated Load Condition And With Rated VRRMApplied Following Surge. Initial TJ = 180°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 3500 3000 2500 2000 1500 200HF(R) Series 1000 1 10 100 4500 4000 3500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 180°C No Voltage Reapplied Rated VRRM Reapplied 3000 2500 2000 1500 200HF(R) Series 1000 0.01 0.1 1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 10000 1000 TJ = 25°C TJ = 180°C 100 200HF(R) Series 10 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) Transient Thermal Impedance Z thJC (K/W) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value: R thJC = 0.17 K/W (DC Operation) 0.1 200HF(R) Series 0.01 0. 001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 6 www.irf.com