299D
www.vishay.com
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Tripole Triple-Lead, Resin-Coated
FEATURES
• Radial through hole terminations: tin / lead
(SnPb), 100 % tin (Sn)
Available
• Triple-lead design allows reverse installations
Available
• 6 miniature case codes available
• EIA standard case sizes
• Easy installation, economical, high performance
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PERFORMANCE CHARACTERISTICS
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.10 μF to 680 μF
Capacitance Tolerance: ± 20 %, ± 10 % standard
± 5 % available as special
Voltage Rating: 3 VDC to 50 VDC
ORDERING INFORMATION
299D
227
X0
003
A
B
1
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE
CODE
LEAD STYLE
PACKAGING
RoHSCOMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
*X5 = ± 5 %
* Special order
Expressed in volts.
To complete the 3-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
See
Ratings
and
Case
Codes
table
B = hockey
stick
1 = bulk
6 = tape and reel
13" [330 mm] reel
E3 = 100 %
tin termination
(RoHS-compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
D
MAX.
T
MAX.
H
MAX.
Seating
plane
L
Tinned
solderable
leads
S
0.200 [5.08] REF.
-
+
CASE
CODE
D (MAX.)
T (MAX.)
H (MAX.)
L
S
A
0.280 [7.1]
0.190 [4.82]
0.360 [9.14]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
-
LEAD SIZE
AWG NO.
NOM. DIA.
24
0.020 [0.51]
B
0.280 [7.1]
0.200 [5.08]
0.360 [9.14]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
24
0.020 [0.51]
C
0.280 [7.1]
0.230 [5.84]
0.380 [9.65]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
24
0.020 [0.51]
D
0.280 [7.1]
0.270 [6.85]
0.440 [11.17]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
24
0.020 [0.51]
E
0.340 [8.63]
0.340 [8.63]
0.560 [14.22]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
24
0.020 [0.51]
F
0.360 [9.14]
0.360 [9.14]
0.620 [15.74]
0.187 ± 0.032 [4.75 ± 0.82]
0.100 ± 0.015 [2.54 ± 0.38]
24
0.020 [0.51]
Revision: 06-Aug-2020
Document Number: 40044
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE (μF)
CASE CODE
PART NUMBER (1)
CAP. TOL. ± 20 %, ± 10 %
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
3 VDC AT + 85 °C, SURGE = 3.6 V; 2 VDC AT + 125 °C, SURGE = 2.4 V
4.7
A
299D475X_003AB_
0.5
6.8
A
299D685X_003AB_
0.5
6
6
10
A
299D106X_003AB_
0.5
8
15
A
299D156X_003AB_
0.5
8
22
B
299D226X_003BB_
0.6
8
33
B
299D336X_003BB_
1.0
8
47
C
299D476X_003CB_
1.4
8
68
D
299D686X_003DB_
2.0
8
100
D
299D107X_003DB_
3.0
10
150
D
299D157X_003DB_
4.0
10
220
E
299D227X_003EB_
5.0
10
330
E
299D337X_003EB_
6.0
10
470
F
299D477X_003FB_
8.0
10
680
F
299D687X_003FB_
10.0
10
3.3
A
299D335X_6R3AB_
0.5
6
4.7
A
299D475X_6R3AB_
0.5
6
6.8
A
299D685X_6R3AB_
0.5
6
10
B
299D106X_6R3BB_
0.6
8
6.3 VDC AT + 85 °C, SURGE = 8 V; 4 VDC AT + 125 °C, SURGE = 5.0 V
15
B
299D156X_6R3BB_
0.9
8
22
C
299D226X_6R3CB_
1.3
8
33
C
299D336X_6R3CB_
2.0
8
47
D
299D476X_6R3DB_
2.9
8
68
D
299D686X_6R3DB_
4.0
8
100
D
299D107X_6R3DB_
5.0
10
150
E
299D157X_6R3EB_
6.0
10
220
F
299D227X_6R3FB_
7.0
10
330
F
299D337X_6R3FB_
8.0
10
2.2
A
299D225X_010AB_
0.5
6
3.3
A
299D335X_010AB_
0.5
6
4.7
A
299D475X_010AB_
0.5
6
10 VDC AT + 85 °C, SURGE = 13 V; 7 VDC AT + 125 °C, SURGE = 9.0 V
6.8
B
299D685X_010BB_
0.6
6
10
B
299D106X_010BB_
1.0
8
15
C
299D156X_010CB_
1.5
8
22
C
299D226X_010CB_
2.0
8
33
D
299D336X_010DB_
3.0
8
47
D
299D476X_010DB_
4.0
8
68
D
299D686X_010DB_
5.0
8
100
E
299D107X_010EB_
6.0
10
150
F
299D157X_010FB_
7.0
10
220
F
299D227X_010FB_
8.0
10
Note
(1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order)
Revision: 06-Aug-2020
Document Number: 40044
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE (μF)
CASE CODE
PART NUMBER (1)
CAP. TOL. ± 20 %, ± 10 %
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
16 VDC AT + 85 °C, SURGE = 20 V; 10 VDC AT + 125 °C, SURGE = 12 V
1.5
A
299D155X_016AB_
0.5
6
2.2
A
299D225X_016AB_
0.5
6
3.3
A
299D335X_016AB_
0.5
6
4.7
B
299D475X_016BB_
0.7
6
6.8
B
299D685X_016BB_
1.0
6
10
C
299D106X_016CB_
1.5
8
15
C
299D156X_016CB_
2.4
8
22
D
299D226X_016DB_
3.5
8
33
D
299D336X_016DB_
4.0
8
47
E
299D476X_016EB_
5.0
8
68
E
299D686X_016EB_
6.0
8
100
F
299D107X_016FB_
7.0
10
150
F
299D157X_016FB_
8.0
10
20 VDC AT + 85 °C, SURGE = 26 V; 13 VDC AT + 125 °C, SURGE = 16 V
1.0
A
299D105X_020AB_
0.5
4
1.5
A
299D155X_020AB_
0.5
6
2.2
A
299D225X_020AB_
0.5
6
3.3
B
299D335X_020BB_
0.8
6
4.7
B
299D475X_020BB_
1.0
6
6.8
C
299D685X_020CB_
1.5
6
10
C
299D106X_020CB_
2.0
8
15
D
299D156X_020DB_
2.5
8
22
D
299D226X_020DB_
3.0
8
33
E
299D336X_020EB_
4.0
8
47
E
299D476X_020EB_
5.0
8
68
F
299D686X_020FB_
6.0
8
100
F
299D107X_020FB_
7.0
10
25 VDC AT + 85 °C, SURGE = 33 V; 17 VDC AT + 125 °C, SURGE = 21 V
1.0
A
299D105X_025AB_
0.5
4
1.5
A
299D155X_025AB_
0.5
6
2.2
A
299D225X_025AB_
0.5
6
3.3
B
299D335X_025BB_
0.8
6
4.7
B
299D475X_025BB_
1.0
6
6.8
C
299D685X_025CB_
1.5
6
10
C
299D106X_025CB_
2.5
8
15
D
299D156X_025DB_
3.0
8
22
D
299D226X_025DB_
4.0
8
33
E
299D336X_025EB_
5.0
8
47
F
299D476X_025FB_
6.0
8
68
F
299D686X_025FB_
7.0
8
Note
(1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order)
Revision: 06-Aug-2020
Document Number: 40044
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE (μF)
CASE CODE
PART NUMBER (1)
CAP. TOL. ± 20 %, ± 10 %
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
35 VDC AT + 85 °C, SURGE = 46 V; 23 VDC AT + 125 °C, SURGE = 28 V
0.10
A
299D104X_035AB_
0.5
4
0.15
A
299D154X_035AB_
0.5
4
0.22
A
299D224X_035AB_
0.5
4
0.33
A
299D334X_035AB_
0.5
4
0.47
A
299D474X_035AB_
0.5
4
0.68
A
299D684X_035AB_
0.5
4
1.0
A
299D105X_035AB_
0.5
4
1.5
A
299D155X_035AB_
0.5
6
2.2
B
299D225X_035BB_
0.7
6
3.3
B
299D335X_035BB_
1.0
6
4.7
C
299D475X_035CB_
1.5
6
6.8
D
299D685X_035DB_
2.2
6
10
D
299D106X_035DB_
3.5
8
15
E
299D156X_035EB_
4.0
8
22
E
299D226X_035EB_
5.0
8
33
F
299D336X_035FB_
6.0
8
47
F
299D476X_035FB_
7.0
8
50 VDC AT + 85 °C, SURGE = 65 V; 33 VDC AT + 125 °C, SURGE = 40 V
0.10
A
299D104X_050AB_
0.5
4
0.15
A
299D154X_050AB_
0.5
4
0.22
A
299D224X_050AB_
0.5
4
0.33
A
299D334X_050AB_
0.5
4
0.47
A
299D474X_050AB_
0.5
4
0.68
A
299D684X_050AB_
0.5
4
1.0
B
299D105X_050BB_
0.5
4
1.5
C
299D155X_050CB_
0.7
6
2.2
C
299D225X_050CB_
1.1
6
3.3
D
299D335X_050DB_
1.5
6
4.7
D
299D475X_050DB_
2.0
6
6.8
F
299D685X_050FB_
3.0
6
10
F
299D106X_050FB_
4.0
8
15
F
299D156X_050FB_
5.0
8
22
F
299D226X_050FB_
6.0
8
Note
(1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order)
PRODUCT INFORMATION
Mounting of Through Hole Components
www.vishay.com/doc?40108
Solid Tantalum Capacitors (With MnO2 Electrolyte) Voltage Derating
www.vishay.com/doc?40246
SELECTOR GUIDES
Quick Reference Guide
www.vishay.com/doc?40037
Selector Guide
www.vishay.com/doc?49054
Parameter Comparison Guide
www.vishay.com/doc?40033
FAQ
Frequently Asked Questions
Revision: 06-Aug-2020
www.vishay.com/doc?40110
Document Number: 40044
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
Vishay Sprague
PERFORMANCE CHARACTERISTICS
1.
Operating Temperature: capacitors are designed to
operate over the temperature range of -55 °C to
+85 °C with no derating.
6.
Dissipation Factor: the dissipation factor,
determined from the expression 2fCR, shall not
exceed values listed in the Standard Ratings table.
1.1
Capacitors may be operated up to +125 °C with
voltage derating to two-thirds the +85 °C rating.
6.1
Measurements shall be made by the bridge method
at, or referred to, a frequency of 120 Hz and a
temperature of +25 °C.
7.
Leakage Current: capacitors shall be stabilized at
the rated temperature for 30 min. Rated voltage shall
be applied to capacitors for 5 min using a steady
source of power (such as a regulated power supply)
with 1000 resistor connected in series with the
capacitor under test to limit the charging current.
Leakage current shall then be measured.
+125 °C RATING
WORKING
VOLTAGE
(V)
SURGE
VOLTAGE
(V)
WORKING
VOLTAGE
(V)
SURGE
VOLTAGE
(V)
3.0
3.6
2.0
2.4
6.3
8.0
4.0
5.0
10
13
7.0
9.0
16
20
10
12
20
26
13
16
25
33
17
21
35
46
23
28
50
65
33
40
2.
DC Working Voltage: the DC working voltage is the
maximum operating voltage for continuous duty at
the rated temperature.
3.
Surge Voltage: the surge DC rating is the maximum
voltage to which the capacitors may be subjected
under any conditions, including transients and peak
ripple at the highest line voltage.
3.1
3.2
4.
4.1
5.
Surge Voltage Test: capacitors shall withstand the
surge voltage applied in series with a 33 ± 5 %
resistor at the rate of 1.5 min on, 1.5 min off at
+85 °C, for 1000 successive test cycles.
Following the surge voltage test, the dissipation
factor and the leakage current shall meet the initial
requirements; the capacitance shall not have
changed more than ± 5 %.
Capacitance Tolerance: the capacitance of all
capacitors shall be within the specified tolerance
limits of the nominal rating.
Capacitance measurements shall be made by means
of polarized capacitance bridge. The polarizing
voltage shall be of such magnitude that there shall be
no reversal of polarity due to the AC component. The
maximum voltage applied to capacitors during
measurement shall be 2 VRMS at 120 Hz at +25 °C. If
the AC voltage applied is less than 0.5 VRMS, no DC
bias is required. Measurement accuracy of the
bridge shall be within ± 2 %.
Capacitance Change with Temperature: the
capacitance change with temperature shall not
exceed the following percentage of the capacitance
measured at +25 % at:
-55 °C
+85 °C
+125 °C
-10 %
+10 %
+12 %
Note that the leakage current varies with temperature
and applied voltage. See graph below for the
appropriate adjustment factor.
LEAKAGE AS A FUNCTION OF VOLTAGE
AND TEMPERATURE
1.0
0.8
0.7
0.6
0.5
0.4
0.3
0.2
LEAKAGE CURRENT FACTOR
+85 °C RATING
0.1
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0 10 20 30 40 50 60 70 80 90 100
PERCENT OF RATED VOLTAGE
Revision: 06-Aug-2020
Document Number: 40044
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
PERFORMANCE CHARACTERISTICS (Continued)
7.1
7.2
7.3
8.
8.1
At +25 °C, the leakage current shall not exceed the
value listed in the Standard Ratings table.
At +85 °C, the leakage current shall not exceed
10 times the value listed in the Standard Ratings
table.
At +125 °C, the leakage current shall not exceed
15 times the value listed in the Standard Ratings
table.
Life Test: capacitors shall withstand rated DC
voltage applied at + 85 °C for 1000 h, with a circuit
resistance no greater than 3 .
Following the life test, the dissipation factor shall
meet the initial requirement; the capacitance change
shall not exceed -10 % to +10 %; the leakage current
shall not exceed 125 % of the initial requirement.
9.
Lead Strength:
9.1
Capacitors shall withstand a force of 2 pounds (9 N)
applied axially to the leads for 10 seconds, without
failure.
9.2
Capacitor leads shall withstand 2 bends through 90°
at the point of egress from the case, without failure.
9.3
No stress shall be applied to the capacitor case
during the preceding tests.
10.
Flammability: encapsulant materials meet UL 94 V-0
with an oxygen index of 32 %.
11.
Capacitor failure mode: the predominant failure
mode for solid tantalum capacitors is increased
leakage current resulting in a shorted circuit.
Capacitor failure may result from excess forward or
reverse DC voltage, surge current, ripple current,
thermal shock or excessive temperature. The
increase in leakage is caused by a breakdown of the
Ta2O5 dielectric. For additional information on
leakage failure of solid tantalum chip capacitors,
refer to Vishay Sprague Technical Paper, “Leakage
Failure Mode in Solid Tantalum Chip Capacitors.”
12.
Humidity test: capacitors shall withstand 1000 h at
+55 °C, 90 % to 95 % relative humidity, with no
voltage applied.
12.1
Following the humidity test, capacitance change
shall not exceed -10 % to +10 % of the initial value,
dissipation factor shall not exceed 150 % of the initial
requirement; leakage current shall not exceed 200 %
of the initial requirement.
Vishay Sprague
GUIDE TO APPLICATION
1.
I RMS =
P
-----------R ESR
where,
P=
power dissipation in W at +25 °C as given in
the table in paragraph number 7
(Power Dissipation)
RESR = the capacitor equivalent series resistance at
the specified frequency
2.
AC Ripple Voltage: the maximum allowable ripple
voltage shall be determined from the formula:
P
V RMS = Z -----------R ESR
or, from the formula:
V RMS = I RMS x Z
where,
P=
power dissipation in W at +25 °C as given in
the table in paragraph number 7
(Power Dissipation).
RESR = the capacitor equivalent series resistance at
the specified frequency.
Z=
The capacitor impedance at the specified
frequency.
2.1
The sum of the peak AC voltage plus the DC voltage
shall not exceed the DC voltage rating of the
capacitor.
2.2
The sum of the negative peak AC voltage plus the
applied DC voltage shall not allow a voltage reversal
exceeding 10 % of the DC working voltage at
+25 °C.
2.3.
Temperature Derating: if these capacitors are to be
operated at temperatures above +25 °C, the
permissible RMS ripple current or voltage shall be
calculated using the derating factors as shown:
3.
Revision: 06-Aug-2020
AC Ripple Current: the maximum allowable ripple
current shall be determined from the formula:
TEMPERATURE
DERATING FACTOR
+25 °C
1.0
+55 °C
0.8
+85 °C
0.6
+125 °C
0.4
Reverse Voltage: these capacitors are capable of
withstanding peak voltages in the reverse direction
equal to 10 % of the DC rating at +25 °C, 5 % of the
DC rating at +85 °C and 1 % of the DC rating at
+105 °C.
Document Number: 40044
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
299D
www.vishay.com
4.
5.
6.
Vishay Sprague
Recommended Rated Working Voltage Guidelines:
APPLICATION VOLTAGE
(V)
RECOMMENDED
CAPACITOR VOLTAGE
RATING (V)
2.5
4.0
4.0
6.3
6.0
10.0
7.
Power Dissipation: power dissipation will be
affected by the heat sinking capability of the
mounting surface. Non-sinusoidal ripple current may
produce heating effects which differ from those
shown. It is important that the equivalent IRMS value
be established when calculating permissible
operating levels. (power dissipation calculated using
+25 °C temperature rise).
Solvent Resistance: type 299D capacitors are
conformally coated with thermosetting resin.
Markings are either laser imprinted or are a heat
cured black epoxy ink conforming to EIA Standard
RS-327A. Marked units are compatible with Class 1
(Alcohols), Class 2 (Aromatic Hydrocarbons), Class 3
(Mineral Spirits), Class 4 (Chlorinated Hydrocarbons)
and Class 5 (Fluorocarbon Methylene Chloride
Azeotropes) solvents.
CASE CODE
MAXIMUM PERMISSIBLE
POWER DISSIPATION AT
+25 °C (W) IN FREE AIR
A
0.140
B
0.160
C
0.180
D
0.210
E
0.240
F
0.270
Wave Soldering Compatibility: capacitor leads
may be subjected to immersion in molten solder
at +260 °C, to a distance of not less than
0.1" [2.54 mm] from the capacitor body, for up to
10 s. The physical integrity of the capacitor shall not
be impaired and the leakage current, dissipation
factor and capacitance shall remain within the initial
requirements after such exposure.
TAPE AND REEL PACKAGING in inches [millimeters]
0.020 ± 0.002
[0.508 ± 0.051]
LEAD DIA. TYP.
1.270 [32.26]
MAX.
0.630 ± 0.020
[16.0 ± 0.508]
0.728 ± 0.020
[18.49 ± 0.508]
+
+
+
+
0.100 [2.54] TYP.
0.200 [5.08] TYP.
0.500 ± 0.012
[12.70 ± 0.305]
Carrier tape
Adhesive tape
Tape and Reel Specifications: type 299D radial-leaded tantalum
capacitors are available taped and reeled per EIA-468.
Requirements for non-standard configurations may be submitted to a
Vishay Sales Office or representative for evaluation.
Revision: 06-Aug-2020
Quantity of components per reel as follows:
UNITS PER REEL
CASE CODE
13" [330]
REEL (MAX.)
A, B, C, D
E, F
1000
500
Document Number: 40044
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
工商网监
湘ICP备2023018690号
