0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
299D475X9020BB1E3

299D475X9020BB1E3

  • 厂商:

    TFUNK(威世)

  • 封装:

    CAP-3P_7.1X5.08MM_TM

  • 描述:

    CAP TANT 4.7UF 10% 20V RADIAL

  • 数据手册
  • 价格&库存
299D475X9020BB1E3 数据手册
299D www.vishay.com Vishay Sprague Solid-Electrolyte TANTALEX® Capacitors, Tripole Triple-Lead, Resin-Coated FEATURES • Radial through hole terminations: tin / lead (SnPb), 100 % tin (Sn) Available • Triple-lead design allows reverse installations Available • 6 miniature case codes available • EIA standard case sizes • Easy installation, economical, high performance • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.10 μF to 680 μF Capacitance Tolerance: ± 20 %, ± 10 % standard ± 5 % available as special Voltage Rating: 3 VDC to 50 VDC ORDERING INFORMATION 299D 227 X0 003 A B 1 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE LEAD STYLE PACKAGING RoHSCOMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % *X5 = ± 5 % * Special order Expressed in volts. To complete the 3-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table B = hockey stick 1 = bulk 6 = tape and reel 13" [330 mm] reel E3 = 100 % tin termination (RoHS-compliant) Blank = SnPb termination DIMENSIONS in inches [millimeters] D MAX. T MAX. H MAX. Seating plane L Tinned solderable leads S 0.200 [5.08] REF. - + CASE CODE D (MAX.) T (MAX.) H (MAX.) L S A 0.280 [7.1] 0.190 [4.82] 0.360 [9.14] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] - LEAD SIZE AWG NO. NOM. DIA. 24 0.020 [0.51] B 0.280 [7.1] 0.200 [5.08] 0.360 [9.14] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] 24 0.020 [0.51] C 0.280 [7.1] 0.230 [5.84] 0.380 [9.65] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] 24 0.020 [0.51] D 0.280 [7.1] 0.270 [6.85] 0.440 [11.17] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] 24 0.020 [0.51] E 0.340 [8.63] 0.340 [8.63] 0.560 [14.22] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] 24 0.020 [0.51] F 0.360 [9.14] 0.360 [9.14] 0.620 [15.74] 0.187 ± 0.032 [4.75 ± 0.82] 0.100 ± 0.015 [2.54 ± 0.38] 24 0.020 [0.51] Revision: 06-Aug-2020 Document Number: 40044 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER (1) CAP. TOL. ± 20 %, ± 10 % MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 3 VDC AT + 85 °C, SURGE = 3.6 V; 2 VDC AT + 125 °C, SURGE = 2.4 V 4.7 A 299D475X_003AB_ 0.5 6.8 A 299D685X_003AB_ 0.5 6 6 10 A 299D106X_003AB_ 0.5 8 15 A 299D156X_003AB_ 0.5 8 22 B 299D226X_003BB_ 0.6 8 33 B 299D336X_003BB_ 1.0 8 47 C 299D476X_003CB_ 1.4 8 68 D 299D686X_003DB_ 2.0 8 100 D 299D107X_003DB_ 3.0 10 150 D 299D157X_003DB_ 4.0 10 220 E 299D227X_003EB_ 5.0 10 330 E 299D337X_003EB_ 6.0 10 470 F 299D477X_003FB_ 8.0 10 680 F 299D687X_003FB_ 10.0 10 3.3 A 299D335X_6R3AB_ 0.5 6 4.7 A 299D475X_6R3AB_ 0.5 6 6.8 A 299D685X_6R3AB_ 0.5 6 10 B 299D106X_6R3BB_ 0.6 8 6.3 VDC AT + 85 °C, SURGE = 8 V; 4 VDC AT + 125 °C, SURGE = 5.0 V 15 B 299D156X_6R3BB_ 0.9 8 22 C 299D226X_6R3CB_ 1.3 8 33 C 299D336X_6R3CB_ 2.0 8 47 D 299D476X_6R3DB_ 2.9 8 68 D 299D686X_6R3DB_ 4.0 8 100 D 299D107X_6R3DB_ 5.0 10 150 E 299D157X_6R3EB_ 6.0 10 220 F 299D227X_6R3FB_ 7.0 10 330 F 299D337X_6R3FB_ 8.0 10 2.2 A 299D225X_010AB_ 0.5 6 3.3 A 299D335X_010AB_ 0.5 6 4.7 A 299D475X_010AB_ 0.5 6 10 VDC AT + 85 °C, SURGE = 13 V; 7 VDC AT + 125 °C, SURGE = 9.0 V 6.8 B 299D685X_010BB_ 0.6 6 10 B 299D106X_010BB_ 1.0 8 15 C 299D156X_010CB_ 1.5 8 22 C 299D226X_010CB_ 2.0 8 33 D 299D336X_010DB_ 3.0 8 47 D 299D476X_010DB_ 4.0 8 68 D 299D686X_010DB_ 5.0 8 100 E 299D107X_010EB_ 6.0 10 150 F 299D157X_010FB_ 7.0 10 220 F 299D227X_010FB_ 8.0 10 Note (1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order) Revision: 06-Aug-2020 Document Number: 40044 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER (1) CAP. TOL. ± 20 %, ± 10 % MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 16 VDC AT + 85 °C, SURGE = 20 V; 10 VDC AT + 125 °C, SURGE = 12 V 1.5 A 299D155X_016AB_ 0.5 6 2.2 A 299D225X_016AB_ 0.5 6 3.3 A 299D335X_016AB_ 0.5 6 4.7 B 299D475X_016BB_ 0.7 6 6.8 B 299D685X_016BB_ 1.0 6 10 C 299D106X_016CB_ 1.5 8 15 C 299D156X_016CB_ 2.4 8 22 D 299D226X_016DB_ 3.5 8 33 D 299D336X_016DB_ 4.0 8 47 E 299D476X_016EB_ 5.0 8 68 E 299D686X_016EB_ 6.0 8 100 F 299D107X_016FB_ 7.0 10 150 F 299D157X_016FB_ 8.0 10 20 VDC AT + 85 °C, SURGE = 26 V; 13 VDC AT + 125 °C, SURGE = 16 V 1.0 A 299D105X_020AB_ 0.5 4 1.5 A 299D155X_020AB_ 0.5 6 2.2 A 299D225X_020AB_ 0.5 6 3.3 B 299D335X_020BB_ 0.8 6 4.7 B 299D475X_020BB_ 1.0 6 6.8 C 299D685X_020CB_ 1.5 6 10 C 299D106X_020CB_ 2.0 8 15 D 299D156X_020DB_ 2.5 8 22 D 299D226X_020DB_ 3.0 8 33 E 299D336X_020EB_ 4.0 8 47 E 299D476X_020EB_ 5.0 8 68 F 299D686X_020FB_ 6.0 8 100 F 299D107X_020FB_ 7.0 10 25 VDC AT + 85 °C, SURGE = 33 V; 17 VDC AT + 125 °C, SURGE = 21 V 1.0 A 299D105X_025AB_ 0.5 4 1.5 A 299D155X_025AB_ 0.5 6 2.2 A 299D225X_025AB_ 0.5 6 3.3 B 299D335X_025BB_ 0.8 6 4.7 B 299D475X_025BB_ 1.0 6 6.8 C 299D685X_025CB_ 1.5 6 10 C 299D106X_025CB_ 2.5 8 15 D 299D156X_025DB_ 3.0 8 22 D 299D226X_025DB_ 4.0 8 33 E 299D336X_025EB_ 5.0 8 47 F 299D476X_025FB_ 6.0 8 68 F 299D686X_025FB_ 7.0 8 Note (1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order) Revision: 06-Aug-2020 Document Number: 40044 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER (1) CAP. TOL. ± 20 %, ± 10 % MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 35 VDC AT + 85 °C, SURGE = 46 V; 23 VDC AT + 125 °C, SURGE = 28 V 0.10 A 299D104X_035AB_ 0.5 4 0.15 A 299D154X_035AB_ 0.5 4 0.22 A 299D224X_035AB_ 0.5 4 0.33 A 299D334X_035AB_ 0.5 4 0.47 A 299D474X_035AB_ 0.5 4 0.68 A 299D684X_035AB_ 0.5 4 1.0 A 299D105X_035AB_ 0.5 4 1.5 A 299D155X_035AB_ 0.5 6 2.2 B 299D225X_035BB_ 0.7 6 3.3 B 299D335X_035BB_ 1.0 6 4.7 C 299D475X_035CB_ 1.5 6 6.8 D 299D685X_035DB_ 2.2 6 10 D 299D106X_035DB_ 3.5 8 15 E 299D156X_035EB_ 4.0 8 22 E 299D226X_035EB_ 5.0 8 33 F 299D336X_035FB_ 6.0 8 47 F 299D476X_035FB_ 7.0 8 50 VDC AT + 85 °C, SURGE = 65 V; 33 VDC AT + 125 °C, SURGE = 40 V 0.10 A 299D104X_050AB_ 0.5 4 0.15 A 299D154X_050AB_ 0.5 4 0.22 A 299D224X_050AB_ 0.5 4 0.33 A 299D334X_050AB_ 0.5 4 0.47 A 299D474X_050AB_ 0.5 4 0.68 A 299D684X_050AB_ 0.5 4 1.0 B 299D105X_050BB_ 0.5 4 1.5 C 299D155X_050CB_ 0.7 6 2.2 C 299D225X_050CB_ 1.1 6 3.3 D 299D335X_050DB_ 1.5 6 4.7 D 299D475X_050DB_ 2.0 6 6.8 F 299D685X_050FB_ 3.0 6 10 F 299D106X_050FB_ 4.0 8 15 F 299D156X_050FB_ 5.0 8 22 F 299D226X_050FB_ 6.0 8 Note (1) Insert capacitance tolerance code “X5”; for ± 5 % units (special order) PRODUCT INFORMATION Mounting of Through Hole Components www.vishay.com/doc?40108 Solid Tantalum Capacitors (With MnO2 Electrolyte) Voltage Derating www.vishay.com/doc?40246 SELECTOR GUIDES Quick Reference Guide www.vishay.com/doc?40037 Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?40033 FAQ Frequently Asked Questions Revision: 06-Aug-2020 www.vishay.com/doc?40110 Document Number: 40044 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com Vishay Sprague PERFORMANCE CHARACTERISTICS 1. Operating Temperature: capacitors are designed to operate over the temperature range of -55 °C to +85 °C with no derating. 6. Dissipation Factor: the dissipation factor, determined from the expression 2fCR, shall not exceed values listed in the Standard Ratings table. 1.1 Capacitors may be operated up to +125 °C with voltage derating to two-thirds the +85 °C rating. 6.1 Measurements shall be made by the bridge method at, or referred to, a frequency of 120 Hz and a temperature of +25 °C. 7. Leakage Current: capacitors shall be stabilized at the rated temperature for 30 min. Rated voltage shall be applied to capacitors for 5 min using a steady source of power (such as a regulated power supply) with 1000  resistor connected in series with the capacitor under test to limit the charging current. Leakage current shall then be measured. +125 °C RATING WORKING VOLTAGE (V) SURGE VOLTAGE (V) WORKING VOLTAGE (V) SURGE VOLTAGE (V) 3.0 3.6 2.0 2.4 6.3 8.0 4.0 5.0 10 13 7.0 9.0 16 20 10 12 20 26 13 16 25 33 17 21 35 46 23 28 50 65 33 40 2. DC Working Voltage: the DC working voltage is the maximum operating voltage for continuous duty at the rated temperature. 3. Surge Voltage: the surge DC rating is the maximum voltage to which the capacitors may be subjected under any conditions, including transients and peak ripple at the highest line voltage. 3.1 3.2 4. 4.1 5. Surge Voltage Test: capacitors shall withstand the surge voltage applied in series with a 33  ± 5 % resistor at the rate of 1.5 min on, 1.5 min off at +85 °C, for 1000 successive test cycles. Following the surge voltage test, the dissipation factor and the leakage current shall meet the initial requirements; the capacitance shall not have changed more than ± 5 %. Capacitance Tolerance: the capacitance of all capacitors shall be within the specified tolerance limits of the nominal rating. Capacitance measurements shall be made by means of polarized capacitance bridge. The polarizing voltage shall be of such magnitude that there shall be no reversal of polarity due to the AC component. The maximum voltage applied to capacitors during measurement shall be 2 VRMS at 120 Hz at +25 °C. If the AC voltage applied is less than 0.5 VRMS, no DC bias is required. Measurement accuracy of the bridge shall be within ± 2 %. Capacitance Change with Temperature: the capacitance change with temperature shall not exceed the following percentage of the capacitance measured at +25 % at: -55 °C +85 °C +125 °C -10 % +10 % +12 % Note that the leakage current varies with temperature and applied voltage. See graph below for the appropriate adjustment factor. LEAKAGE AS A FUNCTION OF VOLTAGE AND TEMPERATURE 1.0 0.8 0.7 0.6 0.5 0.4 0.3 0.2 LEAKAGE CURRENT FACTOR +85 °C RATING 0.1 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0.008 0.007 0.006 0.005 0.004 0.003 0.002 0.001 0 10 20 30 40 50 60 70 80 90 100 PERCENT OF RATED VOLTAGE   Revision: 06-Aug-2020 Document Number: 40044 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com PERFORMANCE CHARACTERISTICS (Continued) 7.1 7.2 7.3 8. 8.1 At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table. At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table. At +125 °C, the leakage current shall not exceed 15 times the value listed in the Standard Ratings table. Life Test: capacitors shall withstand rated DC voltage applied at + 85 °C for 1000 h, with a circuit resistance no greater than 3 . Following the life test, the dissipation factor shall meet the initial requirement; the capacitance change shall not exceed -10 % to +10 %; the leakage current shall not exceed 125 % of the initial requirement. 9. Lead Strength: 9.1 Capacitors shall withstand a force of 2 pounds (9 N) applied axially to the leads for 10 seconds, without failure. 9.2 Capacitor leads shall withstand 2 bends through 90° at the point of egress from the case, without failure. 9.3 No stress shall be applied to the capacitor case during the preceding tests. 10. Flammability: encapsulant materials meet UL 94 V-0 with an oxygen index of 32 %. 11. Capacitor failure mode: the predominant failure mode for solid tantalum capacitors is increased leakage current resulting in a shorted circuit. Capacitor failure may result from excess forward or reverse DC voltage, surge current, ripple current, thermal shock or excessive temperature. The increase in leakage is caused by a breakdown of the Ta2O5 dielectric. For additional information on leakage failure of solid tantalum chip capacitors, refer to Vishay Sprague Technical Paper, “Leakage Failure Mode in Solid Tantalum Chip Capacitors.” 12. Humidity test: capacitors shall withstand 1000 h at +55 °C, 90 % to 95 % relative humidity, with no voltage applied. 12.1 Following the humidity test, capacitance change shall not exceed -10 % to +10 % of the initial value, dissipation factor shall not exceed 150 % of the initial requirement; leakage current shall not exceed 200 % of the initial requirement. Vishay Sprague GUIDE TO APPLICATION 1. I RMS = P -----------R ESR where, P= power dissipation in W at +25 °C as given in the table in paragraph number 7  (Power Dissipation) RESR = the capacitor equivalent series resistance at the specified frequency 2. AC Ripple Voltage: the maximum allowable ripple voltage shall be determined from the formula: P V RMS = Z -----------R ESR or, from the formula: V RMS = I RMS x Z where, P= power dissipation in W at +25 °C as given in the table in paragraph number 7 (Power Dissipation). RESR = the capacitor equivalent series resistance at the specified frequency. Z= The capacitor impedance at the specified frequency. 2.1 The sum of the peak AC voltage plus the DC voltage shall not exceed the DC voltage rating of the capacitor. 2.2 The sum of the negative peak AC voltage plus the applied DC voltage shall not allow a voltage reversal exceeding 10 % of the DC working voltage at +25 °C. 2.3. Temperature Derating: if these capacitors are to be operated at temperatures above +25 °C, the permissible RMS ripple current or voltage shall be calculated using the derating factors as shown: 3. Revision: 06-Aug-2020 AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: TEMPERATURE DERATING FACTOR +25 °C 1.0 +55 °C 0.8 +85 °C 0.6 +125 °C 0.4 Reverse Voltage: these capacitors are capable of withstanding peak voltages in the reverse direction equal to 10 % of the DC rating at +25 °C, 5 % of the DC rating at +85 °C and 1 % of the DC rating at +105 °C. Document Number: 40044 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299D www.vishay.com 4. 5. 6. Vishay Sprague Recommended Rated Working Voltage Guidelines: APPLICATION VOLTAGE (V) RECOMMENDED CAPACITOR VOLTAGE RATING (V) 2.5 4.0 4.0 6.3 6.0 10.0 7. Power Dissipation: power dissipation will be affected by the heat sinking capability of the mounting surface. Non-sinusoidal ripple current may produce heating effects which differ from those shown. It is important that the equivalent IRMS value be established when calculating permissible operating levels. (power dissipation calculated using +25 °C temperature rise). Solvent Resistance: type 299D capacitors are conformally coated with thermosetting resin. Markings are either laser imprinted or are a heat cured black epoxy ink conforming to EIA Standard RS-327A. Marked units are compatible with Class 1 (Alcohols), Class 2 (Aromatic Hydrocarbons), Class 3 (Mineral Spirits), Class 4 (Chlorinated Hydrocarbons) and Class 5 (Fluorocarbon Methylene Chloride Azeotropes) solvents. CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR A 0.140 B 0.160 C 0.180 D 0.210 E 0.240 F 0.270 Wave Soldering Compatibility: capacitor leads may be subjected to immersion in molten solder at +260 °C, to a distance of not less than 0.1" [2.54 mm] from the capacitor body, for up to 10 s. The physical integrity of the capacitor shall not be impaired and the leakage current, dissipation factor and capacitance shall remain within the initial requirements after such exposure. TAPE AND REEL PACKAGING in inches [millimeters] 0.020 ± 0.002 [0.508 ± 0.051] LEAD DIA. TYP. 1.270 [32.26] MAX. 0.630 ± 0.020 [16.0 ± 0.508] 0.728 ± 0.020 [18.49 ± 0.508] + + + + 0.100 [2.54] TYP. 0.200 [5.08] TYP. 0.500 ± 0.012 [12.70 ± 0.305] Carrier tape Adhesive tape Tape and Reel Specifications: type 299D radial-leaded tantalum capacitors are available taped and reeled per EIA-468. Requirements for non-standard configurations may be submitted to a Vishay Sales Office or representative for evaluation. Revision: 06-Aug-2020 Quantity of components per reel as follows: UNITS PER REEL CASE CODE 13" [330] REEL (MAX.) A, B, C, D E, F 1000 500 Document Number: 40044 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000
299D475X9020BB1E3 价格&库存

很抱歉,暂时无法提供与“299D475X9020BB1E3”相匹配的价格&库存,您可以联系我们找货

免费人工找货