30BQ100

Bulletin PD-20409 rev. C 01/07 30BQ100PbF SCHOTTKY RECTIFIER 3 Amp IF(AV) = 3.0Amp VR = 100V Major Ratings and Characteristics Description/ Features The 30BQ100PbF surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Characteristics Values Units IF(AV) Rectangular waveform 3.0 A VRRM 100 V Small foot print, surface mountable IFSM @ t p= 5 μs sine 800 A Very low forward voltage drop High frequency operation VF @ 3.0 Apk, TJ = 125°C 0.62 V Guard ring for enhanced ruggedness and long term reliability TJ range - 55 to 175 °C Lead-Free ("PbF" suffix) Case Styles SMC Document Number: 94181 www.vishay.com 1 30BQ100PbF Bulletin PD-20409 rev. C 01/07 Voltage Ratings Part number VR 30BQ100PbF Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 30BQ IF(AV) Max. Average Forward Current 3.0 Units Conditions A 4.0 IFSM 50% duty cycle @ TL = 148 °C, rectangular wave form 50% duty cycle @ TL = 138 °C, rectangular wave form Max. Peak One Cycle Non-Repetitive 800 Surge Current 70 A EAS Non Repetitive Avalanche Energy 3.0 mJ IAR Repetitive Avalanche Current 0.5 A 5μs Sine or 3μs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1.0A, L = 6mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. Va = 1.5 x Vr typical Electrical Specifications Parameters VFM IRM Max. Forward Voltage Drop 30BQ (1) Max. Reverse Leakage Current (1) Units Conditions 0.79 V @ 3A 0.90 V @ 6A 0.62 V @ 3A 0.70 V @ 6A 0.5 mA TJ = 25 °C 5.0 mA TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR CT Max. Junction Capacitance 115 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25°C LS Typical Series Inductance 3.0 nH Measured lead to lead 5mm from package body 10000 V/μs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300μs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 30BQ TJ Max. Junction Temperature Range (*) - 55 to 175 Tstg Max. Storage Temperature Range RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight - 55 to 175 Units Conditions °C °C 12 °C/W DC operation 46 °C/W DC operation (**) 0.24 (0.008) g (oz.) Case Style SMC Device Marking IR3J Similar to DO-214AB (*) dPtot 1 < thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB Document Number: 94181 www.vishay.com 2 30BQ100PbF Bulletin PD-20409 rev. C 01/07 10 T = 175˚C J 1 150˚C 125˚C 0.1 100˚C 0.01 75˚C 0.001 50˚C 0.0001 25˚C 0 0 20 40 60 80 100 Reverse Voltage - VR (V) 1 T J = 175˚C Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) T J = 125˚C 1000 T = 25˚C J Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) 10 T = 25˚C J 100 10 0.1 0 0.2 0.4 0.6 0.8 1 Forward Voltage Drop - VFM (V) 0 1.2 20 40 60 Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (°C/W) 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 1 Notes: Single Pulse (Thermal Resistance) 0.1 0.00001 0.0001 . 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z Document Number: 94181 1. Duty factor D = t1/ t2 thJC 10 . 100 Characteristics (Per Leg) www.vishay.com 3 30BQ100PbF Bulletin PD-20409 rev. C 01/07 2.5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 160 Average Power Loss (Watts) Allowable Lead Temperature (°C) 180 140 Square wave (D = 0.50) 80% Rated Vr applied 120 see note (2) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 2 1.5 RMS Limit 1 DC 0.5 0 100 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 1 2 3 4 5 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current 1000 Non-Repetitive Surge Current - I FSM (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR Document Number: 94181 www.vishay.com 4 30BQ100PbF Bulletin PD-20409 rev. C 01/07 Outline Table Device Marking: IR3J 2.75 (.108) 3.15 (.124) 5.59 (.220) 6.22 (.245) CATHODE 6.60 (.260) 1 ANODE 2 7.11 (.280) .152 (.006) .305 (.012) 1 POLARITY 2.00 (.079) 2.62 (.103) 2 PART NUMBER .102 (.004) 0.76 (.030) 1.52 (.060) .203 (.008) 7.75 (.305) 8.13 (.320) Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR3J VOLTAGE CURRENT IR LOGO PYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" Document Number: 94181 www.vishay.com 5 30BQ100PbF Bulletin PD-20409 rev. C 01/07 Tape & Reel Information Dimensions in millimetres and (inches) 30BQ100 ******************************************** * SPICE Model Diode * ******************************************** .SUBCKT 30BQ100 ANO CAT D1 ANO 1 CAT *Define diode model .MODEL DMOD D (IS=100N, N=1.34718, BV=120, RS=40.3878M, CJO=158.574P, VJ=3.61795, M=526.488M, EG=1.11, XTI=2, RL=25.6436MEG). ****************************************************************************** .ENDS 30BQ100 Thermal Model Subcircuit .SUBCKT 30BQ100 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 5 4 3 2 4 3 2 1 6.42E-01 1.03E+01 1.66E+02 6.78E+03 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 4 3 2 1 3.34E+00 4.97E+00 2.84E+00 7.75E-01 .ENDS 30BQ100 Document Number: 94181 www.vishay.com 6 30BQ100PbF Bulletin PD-20409 rev. C 01/07 Ordering Information Table Device Code 30 B Q 100 1 2 3 4 TR PbF 5 6 1 - Current Rating 2 - B = Single Lead Diode 3 - Q = Schottky Q Series 4 - Voltage Rating (100 = 100V) 5 - y none = Box (1000 pieces) 6 - y TR = Tape & Reel (3000 pieces) y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 01/07 Document Number: 94181 www.vishay.com 7 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN® are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1