30CTH03

30CTH03 Vishay High Power Products Hyperfast Rectifier, 2 x 15 A FRED PtTM FEATURES • Hyperfast recovery time Base common cathode 2 • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature 2 Common cathode TO-220AB • Designed and qualified for AEC Q101 level 3 Anode 1 Anode DESCRIPTION/APPLICATIONS 300 V series are the state of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop and hyperfast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, dc-to-dc converters as well as freewheeling diodes in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. PRODUCT SUMMARY trr (maximum) 36 ns IF(AV) 2 x 15 A VR 300 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage TEST CONDITIONS VRRM per diode Average rectified forward current per device Non-repetitive peak surge current IF(AV) IFSM Operating junction and storage temperatures VALUES UNITS 300 V TC = 153 °C 15 TC = 25 °C 150 30 TJ, TStg A - 65 to 175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 300 - - IF = 15 A - 1.0 1.25 IR = 100 µA IF = 15 A, TJ = 125 °C - 0.85 0.95 VR = VR rated - - 40 TJ = 125 °C, VR = VR rated - 8 200 UNITS V µA Reverse leakage current IR Junction capacitance CT VR = 300 V - 38 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8 - nH Document Number: 93015 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 30CTH03 Vishay High Power Products Hyperfast Rectifier, 2 x 15 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER Reverse recovery time SYMBOL trr TEST CONDITIONS MIN. Reverse recovery charge IRRM Qrr MAX. IF = 1 A, dIF/dt = 50 A/µs, VR = 30 V - - 36 IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V - - 30 TJ = 25 °C - 33 - - 48 - TJ = 125 °C Peak recovery current TYP. TJ = 25 °C TJ = 125 °C IF = 15 A dIF/dt = 200 A/µs VR = 200 V - 2.8 - - 6.5 - TJ = 25 °C - 46 - TJ = 125 °C - 160 - UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per diode Marking device www.vishay.com 2 SYMBOL MIN. TYP. MAX. TJ, TStg RthJC - 65 - 175 °C - - 1.4 °C/W Case style TO-220AB For technical questions, contact: diodes-tech@vishay.com UNITS 30CTH03 Document Number: 93015 Revision: 28-Jul-08 30CTH03 Hyperfast Rectifier, 2 x 15 A FRED PtTM 100 Vishay High Power Products 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) TJ = 175 °C TJ = 175 °C TJ = 125 °C TJ = 25 °C 10 1 0.4 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 0.001 0.6 0.8 1.0 1.2 1.4 0 1.6 50 150 100 200 250 300 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 100 TJ = 25 °C 10 0 50 100 150 200 250 300 ZthJC - Thermal Impedance (°C/W) VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93015 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 30CTH03 Hyperfast Rectifier, 2 x 15 A FRED PtTM Vishay High Power Products 100 IF = 15 A 170 TJ = 125 °C DC trr (ns) Allowable Case Temperature (°C) 180 160 TJ = 25 °C Square wave (D = 0.50) Rated VR applied 150 VR = 200 V See note (1) 140 0 5 10 15 20 10 100 25 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 20 1000 16 RMS limit TJ = 125 °C 12 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 8 4 Qrr (nC) Average Power Loss (W) IF = 15 A DC 5 TJ = 25 °C VR = 200 V 0 0 100 10 15 20 25 10 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93015 Revision: 28-Jul-08 30CTH03 Hyperfast Rectifier, 2 x 15 A FRED PtTM Vishay High Power Products VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 93015 Revision: 28-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 30CTH03 Hyperfast Rectifier, 2 x 15 A FRED PtTM Vishay High Power Products ORDERING INFORMATION TABLE Device code 30 C T H 03 - 1 2 3 4 5 6 1 - Current rating (30 = 30 A) 2 - C = Common cathode 3 - Package: 4 T = TO-220 4 - H = Hyperfast recovery 5 - Voltage rating (03 = 300 V) 6 - None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95222 Part marking information http://www.vishay.com/doc?95267 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93015 Revision: 28-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1