30TPS... High Voltage Series
Vishay High Power Products
Phase Control SCR, 20 A
DESCRIPTION/FEATURES
2
(A)
TO-247AC
The 30TPS... High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature.
1 (K) (G) 3
PRODUCT SUMMARY
VT at 20 A
< 1.3 V
ITSM
300 A
VRRM
800/1200 V
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
This product has been designed and qualified for industrial
level.
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
IT(AV)
TEST CONDITIONS
Sinusoidal waveform
VALUES
UNITS
20
A
IRMS
30
VRRM/VDRM
800/1200
V
300
A
1.3
V
dV/dt
500
V/µs
dI/dt
150
A/µs
- 40 to 125
°C
VRRM/VDRM, MAXIMUM
REPETITIVE PEAK AND
OFF-STATE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
IRRM/IDRM
AT 125 °C
mA
30TPS08
800
900
30TPS12
1200
1300
ITSM
VT
20 A, TJ = 25 °C
TJ
VOLTAGE RATINGS
PART NUMBER
10
Document Number: 93707
Revision: 12-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
1
30TPS... High Voltage Series
Vishay High Power Products Phase Control SCR, 20 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current
IT(AV)
Maximum RMS on-state current
IRMS
Maximum peak, one-cycle
non-repetitive surge current
ITSM
VALUES
20
10 ms sine pulse, rated VRRM applied
250
10 ms sine pulse, no voltage reapplied
300
30
UNITS
A
10 ms sine pulse, rated VRRM applied
310
10 ms sine pulse, no voltage reapplied
442
I2√t
t = 0.1 to 10 ms, no voltage reapplied
4420
A2√s
VTM
20 A, TJ = 25 °C
1.3
V
12
mΩ
1.0
V
Maximum I2t for fusing
I2 t
Maximum I2√t for fusing
Maximum on-state voltage drop
On-state slope resistance
TEST CONDITIONS
TC = 95 °C, 180° conduction half sine wave
rt
Threshold voltage
VT(TO)
Maximum reverse and direct leakage current
IRM/IDM
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
VR = Rated VRRM/VDRM
A2s
0.5
10
Maximum holding current
IH
Anode supply = 6 V, resistive load, initial IT = 1 A
100
Maximum latching current
IL
Anode supply = 6 V, resistive load
200
mA
Maximum rate of rise of off-state voltage
dV/dt
500
V/µs
Maximum rate of rise of turned-on current
dI/dt
150
A/µs
VALUES
UNITS
TRIGGERING
PARAMETER
SYMBOL
Maximum peak gate power
TEST CONDITIONS
PGM
8.0
PG(AV)
2.0
Maximum peak positive gate current
+ IGM
1.5
A
Maximum peak negative gate voltage
- VGM
10
V
Maximum average gate power
Maximum required DC gate current to trigger
Maximum required DC gate
voltage to trigger
IGT
VGT
Maximum DC gate voltage not to trigger
VGD
Maximum DC gate current not to trigger
IGD
Anode supply = 6 V, resistive load, TJ = - 10 °C
60
Anode supply = 6 V, resistive load, TJ = 25 °C
45
Anode supply = 6 V, resistive load, TJ = 125 °C
20
Anode supply = 6 V, resistive load, TJ = - 10 °C
2.5
Anode supply = 6 V, resistive load, TJ = 25 °C
2.0
Anode supply = 6 V, resistive load, TJ = 125 °C
1.0
TJ = 125 °C, VDRM = Rated value
W
mA
V
0.25
2.0
mA
VALUES
UNITS
SWITCHING
PARAMETER
SYMBOL
Typical turn-on time
tgt
Typical reverse recovery time
trr
Typical turn-off time
tq
www.vishay.com
2
TEST CONDITIONS
TJ = 25 °C
TJ = 125 °C
For technical questions, contact: diodes-tech@vishay.com
0.9
4
µs
110
Document Number: 93707
Revision: 12-Aug-08
30TPS... High Voltage Series
Phase Control SCR, 20 A
Vishay High Power Products
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TJ, TStg
Maximum thermal resistance,
junction to case
RthJC
Maximum thermal resistance,
junction to ambient
RthJA
Maximum thermal resistance,
case to heatsink
RthCS
TEST CONDITIONS
Marking device
Document Number: 93707
Revision: 12-Aug-08
UNITS
- 40 to 125
°C
0.8
DC operation
°C/W
40
Mounting surface, smooth and greased
Approximate weight
Mounting torque
VALUES
0.2
6
g
0.21
oz.
minimum
6 (5)
maximum
12 (10)
kgf · cm
(lbf · in)
Case style TO-247AC (JEDEC)
For technical questions, contact: diodes-tech@vishay.com
30TPS08
30TPS12
www.vishay.com
3
30TPS... High Voltage Series
30TPS.. Series
R thJC (DC) = 0.8 °C/ W
120
Conduction Angle
110
30°
60°
90°
100
120°
180°
90
0
5
10
15
20
25
40 RMS Limit
Conduction Period
20
30TPS.. Series
TJ = 125°C
0
0
10
20
30
40
50
Average On-state Current (A)
110
Conduction Period
100
30°
60°
90
90°
120°
180° DC
80
5
10
15
20
25
30
35
Average On-state Current (A)
30
Conduction Angle
30TPS.. Series
TJ= 125°C
10
0
5
10
15
20
25
30
Average On-state Current (A)
Fig. 3 - On-State Power Loss Characteristics
Peak Half Sine Wave On-state Current (A)
RMS Limit
20
220
200
180
160
140
30TPS.. Series
120
10
100
Fig. 5 - Maximum Non-Repetitive Surge Current
180°
120°
90°
60°
30°
40
At Any Rated Load Condition And With
Rated V RRM Applied Following Surge.
Initial TJ = 125°C
@60 Hz 0.0083 s
240
@50 Hz 0.0100 s
260
Numb er Of Equa l Amplitude Ha lf Cyc le Current Pulses (N)
60
50
280
1
Fig. 2 - Current Rating Characteristics
Maximum Average On-state Power Loss (W)
60
Fig. 4 - On-State Power Loss Characteristics
120
www.vishay.com
4
DC
180°
120°
90°
60°
30°
Average On-state Current (A)
30TPS.. Series
RthJC (DC) = 0.8 °C/ W
0
80
Fig. 1 - Current Rating Characteristics
130
0
Maximum Average On-state Power Loss (W)
130
Peak Half Sine Wave On-state Current (A)
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
Vishay High Power Products Phase Control SCR, 20 A
300
280
260
240
Maximum Non Repetitive Surge Current
Versus Pulse Tra in Duration. Control
Of Conduc tion May Not Be Ma intained.
Initial TJ= 125°C
No Voltage Reapplied
Rated VRRMReapplied
220
200
180
160
140
30TPS.. Series
120
0.01
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93707
Revision: 12-Aug-08
30TPS... High Voltage Series
Phase Control SCR, 20 A
Vishay High Power Products
Instantaneous On-state Current (A)
1000
TJ= 25°C
TJ= 125°C
100
10
30TPS.. Series
1
0
1
2
3
4
5
6
7
Instantaneous On-state Voltage (V)
Transient Thermal Impedance Z thJC (°C/ W)
Fig. 7 - On-State Voltage Drop Characteristics
1
Steady State Value
(DC Operation)
D = 0.50
D = 0.33
D = 0.25
D = 0.17
0.1
D = 0.08
Single Pulse
30TPS.. Series
0.01
0.0001
0.001
0.01
0.1
1
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
Rec tangular gate p ulse
a )Rec ommend ed loa d line for
rated di/ dt: 10 V, 20 ohms
tr = 0.5 µs, tp >= 6 µs
b)Recommend ed load line for
= 6 µs
(1) PGM = 40 W, tp = 1 ms
(2) PGM = 20 W, tp = 2 ms
(3) PGM = 8 W, tp = 5 ms
(4) PGM = 4 W, tp = 10 ms
(a )
(b )
VGD
IGD
0.1
0.001
TJ = -10 °C
TJ = 125 °C
1
TJ = 25 °C
Instantaneous Gate Voltage (V)
100
(4)
0.1
(2)
(1)
Frequency Limited by PG(AV)
30TPS.. Series
0.01
(3)
1
10
100
Instantaneous Gate Current (A)
Fig. 9 - Gate Characteristics
Document Number: 93707
Revision: 12-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
5
30TPS... High Voltage Series
Vishay High Power Products Phase Control SCR, 20 A
ORDERING INFORMATION TABLE
Device code
30
T
P
S
12
-
1
2
3
4
5
6
1
-
Current rating (30 = 30 A)
2
-
Circuit configuration:
T = Thyristor
3
-
Package:
P = TO-247
4
-
Type of silicon:
S = Standard recovery rectifier
5
-
6
-
08 = 800 V
12 = 1200 V
Voltage code x 100 = VRRM
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95223
Part marking information
http://www.vishay.com/doc?95226
www.vishay.com
6
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93707
Revision: 12-Aug-08
Legal Disclaimer Notice
Vishay
Notice
The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.
Document Number: 99901
Revision: 12-Mar-07
www.vishay.com
1
