30WQ06FNTRL

Bulletin PD-20522 rev. E 03/03 30WQ06FN 3.5 Amp SCHOTTKY RECTIFIER D-Pak (TO-252AA) Major Ratings and Characteristics Characteristics Description/ Features 30WQ06FN Units IF(AV) Rectangular waveform 3.5 A VRRM 60 V IFSM @ tp = 5 µs sine 490 A VF 0.53 V The 30WQ06FN surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface mountable Low forward voltage drop @ 3 Apk, TJ = 125°C TJ - 40 to 150 High frequency operation °C Guard ring for enhanced ruggedness and long term reliability 2.38 (0.09) 6.73 (0.26) 2.19 (0.08) 6.35 (0.25) 1.14 (0.04) MINIMUM RECOMMENDED FOOTPRINT 0.89 (0.03) 5.46 (0.21) 1.27 (0.05) 0.58 (0.02) 5.21 (0.20) 0.88 (0.03) 0.46 (0.02) 5.97 (0.24) 4 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 5.97 (0.23) 5.68 (0.22) 6.48 (0.26) 10.42 (0.41) 10.67 (0.42) 9.40 (0.37) 1 2 3 0.51 (0.02) MIN. 1.52 (0.06) 2x 2.54 (0.10) 1.15 (0.04) 2x 1.14 (0.04) 3x 0.89 (0.03) 0.64 (0.02) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 1 2 3 4 0.58 (0.02) 1.65 (0.06) 0.46 (0.02) 2x Base Cathode - Anode - Cathode - Anode - Cathode Conform to JEDEC outline D-Pak (Similar to TO-252AA) Dimensions in millimeters and (inches) www.irf.com 2.28 (0.09) 2x 4, 2 1 3 Anode Anode 1 30WQ06FN Bulletin PD-20522 rev. E 03/03 Voltage Ratings Part number VR 30WQ06FN Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current 30WQ... Units 3.5 A Conditions 50% duty cycle @ TC = 133°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 490 A Surge Current * See Fig. 7 70 EAS Non-Repetitive Avalanche Energy 6.0 mJ IAR Repetitive Avalanche Current 1.0 A 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1 Amp, L = 12 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications 30WQ... Units Max. Forward Voltage Drop Parameters 0.61 V @ 3A * See Fig. 1 0.76 V @ 6A 0.53 V @ 3A 0.65 V @ 6A Max. Reverse Leakage Current 2 mA TJ = 25 °C * See Fig. 2 30 mA TJ = 125 °C VF(TO) Threshold Voltage 0.38 V TJ = TJ max. rt Forward Slope Resistance 34.31 mΩ CT Typical Junction Capacitance 145 pF LS Typical Series Inductance VFM IRM (1) (1) dv/dt Max. Voltage Rate of Change 5.0 nH 10000 V/µs Conditions TJ = 25 °C TJ = 125 °C VR = rated VR VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 30WQ... Units TJ Max. Junction Temper. Range (*) -40 to 150 °C Tstg Max. Storage Temperature Range -40 to 150 °C RthJC Max. Thermal Resistance Junction to Case wt Approximate Weight Case Style (*) dPtot dTj 2 < 1 Rth( j-a) 4.7 0.3 (0.01) D - PAK Conditions °C/W DC operation * See Fig. 4 g (oz.) Similar to TO-252AA thermal runaway condition for a diode on its own heatsink www.irf.com 30WQ06FN Bulletin PD-20522 rev. E 03/03 100 100 Reverse Current - I R (mA) TJ= 150°C 125°C 100°C 1 75°C 0.1 50°C 0.01 25°C 0.001 0 10 TJ= 125°C 10 20 30 40 50 60 Reverse Voltage - V R(V) TJ= 25°C Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage T (pF) 1000 Junction Capacitance - C Instantaneous Forward Current - I F(A) TJ= 150°C 10 TJ= 25°C 100 10 1 0 0.4 0.8 1.2 1.6 2 2.4 0 2.8 10 20 30 40 50 Forward Voltage Drop - V FM(V) Reverse Voltage - V R(V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 60 Thermal Impedance Z thJC (°C/ W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 Notes: Single Pulse (Thermal Resistance) 0.1 0.00001 0.0001 0.001 1. Duty factor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ TC 0.01 0.1 1 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 30WQ06FN Bulletin PD-20522 rev. E 03/03 3 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 150 145 Average Power Loss - (Watts) Allowable Case Temperature - (°C) 155 DC 140 135 130 125 Square wave (D = 0.50) 80% Rated V Rapplied 120 115 2.5 2 RMSLimit DC 1.5 1 0.5 see note (2) 110 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 Average Forward Current - I F(AV) (A) 2 3 4 5 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I FSM (A) 1 Fig. 6 - Forward Power Loss Characteristics 1000 100 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - t p(microsec) Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 30WQ06FN Bulletin PD-20522 rev. E 03/03 Marking Information 4 (K) INTERNATIONAL EXAMPLE: THIS IS AN 30WQ06FN PART NUMBER RECTIFIER LOGO 30WQ06FN 712A 5K3A DATE CODE (YWWA) Y = YEAR W W = WEEK A = LINE ASSEMBLY 2 (K) LOT CODE 1 (A) 3 (A) Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. www.irf.com 50 (1.97) DIA. When ordering, indicate the p number, part orientation, and quantity. Quantities are in multip of 2,000 pieces per reel for TR a multiples of 3,000 pieces per for both TRL and TRR. 5 30WQ06FN Bulletin PD-20522 rev. E 03/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 6 www.irf.com