489D105X0035B6VE3

489D, 499D www.vishay.com Vishay Sprague Resin-Coated, Radial-Lead Solid Tantalum Capacitors FEATURES • Terminations: standard SnPb, 100 % tin available Available • Large capacitance range Available • Encapsulated in a hard yellow epoxy resin • Variety of lead styles available • Supplied on tape (reel or ammopack) or in bulk • Low impedance and ESR at high frequencies • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL CHARACTERISTICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Operating Temperature: Type 489D: -55 °C to +85 °C Type 499D: -55 °C to +125 °C (above 85 °C, voltage derating is required) APPLICATIONS Offer a very cost effective solution in the consumer, industrial and professional electronics markets. The capacitors are intended for high volume applications. ORDERING INFORMATION 489D 686 X0 6R3 D 2 A E3 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C CASE CODE LEAD STYLE PACKAGING RoHSCOMPLIANT 489D Standard +85 °C 499D Standard +125 °C Low IL Expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros following. X0 = ± 20 % X9 = ± 10 % Expressed by zeros if needed to complete the 3 digit block. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 1, 2, 3, 4, 6, 9 See description on next pages A = ammopack B = reel pack, positive leader C = reel pack, negative leader V = bulk pack E3 = 100 % tin termination (RoHS-compliant design) Blank = SnPb termination (standard design) Revision: 04-Aug-2020 Document Number: 42070 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague LEAD STYLE CONFIGURATIONS, PACKAGING OPTIONS, AND DIMENSIONS in inches [millimeters] Bulk lead styles Tape (reel / ammo) lead styles 1 and 3 2 and 4 6 9 2 and 4 6 D D D D D D H H 15 min. 20 max. 15 min. 20 max. 0.5¯ 0.5¯ 3 P ± 0.5 0.5¯ P ± 0.5 0.5¯ P ± 0.5 P ± 0.5 P ± 0.5 BULK 1, 2, 3, 4 (1) P ± 0.5 TAPE (REEL / AMMO BOX) 6 (1) H1 4.5 ± 1.5 1.1 ± 0.05 P H H2 5.5 ± 0.5 PACKAGING LEAD STYLES Upper edge of printed circuit board H1 9 (1) 2, 4 (1) 6 (1) CASE D (MAX.) P ± 0.020 [0.50] H (MAX.) P ± 0.020 [0.50] H1 (MAX.) P ± 0.020 [0.50] H2 (MAX.) P ± 0.020 [0.50] H (MAX.) P ± 0.020 [0.50] H1 (MAX.) A 0.146 [3.70] 0.100 [2.54] 0.276 [7.0] 0.200 [5.08] 0.433 [11.0] 0.200 [5.08] 0.394 [10.0] 0.100 [2.54] 0.276 [7.0] 0.200 [5.08] 0.433 [11.0] B 0.157 [4.00] 0.100 [2.54] 0.295 [7.50] 0.200 [5.08] 0.453 [11.5] 0.200 [5.08] 0.413 [10.5] 0.100 [2.54] 0.295 [7.50] 0.200 [5.08] 0.453 [11.5] C 0.177 [4.50] 0.100 [2.54] 0.315 [8.0] 0.200 [5.08] 0.472 [12.0] 0.200 [5.08] 0.433 [11.0] 0.100 [2.54] 0.315 [8.0] 0.200 [5.08] 0.472 [12.0] D 0.197 [5.00] 0.100 [2.54] 0.354 [9.0] 0.200 [5.08] 0.512 [13.0] 0.200 [5.08] 0.472 [12.0] 0.100 [2.54] 0.354 [9.0] 0.200 [5.08] 0.512 [13.0] E 0.217 [5.50] 0.100 [2.54] 0.394 [10.0] 0.200 [5.08] 0.551 [14.0] 0.200 [5.08] 0.512 [13.0] 0.100 [2.54] 0.394 [10.0] 0.200 [5.08] 0.551 [14.0] F 0.236 [6.00] 0.100 [2.54] 0.433 [11.0] 0.200 [5.08] 0.591 [15.0] 0.200 [5.08] 0.551 [14.0] 0.100 [2.54] 0.433 [11.0] 0.200 [5.08] 0.591 [15.0] H 0.260 [6.50] 0.100 [2.54] 0.472 [12.0] 0.200 [5.08] 0.623 [16.0] 0.200 [5.08] 0.591 [15.0] 0.100 [2.54] 0.472 [12.0] 0.200 [5.08] 0.623 [16.0] M 0.394 [10.0] 0.200 [5.08] 0.571 [14.5] n/a n/a 0.200 [5.08] 0.709 [18.0] 0.200 [5.08] 0.571 [14.5] n/a n/a N 0.433 [11.0] 0.200 [5.08] 0.623 [16.0] n/a n/a 0.200 [5.08] 0.748 [19.0] 0.200 [5.08] 0.623 [16.0] n/a n/a R 0.472 [12.0] 0.200 [5.08] 0.748 [19.0] n/a n/a 0.200 [5.08] 0.866 [22.0] n/a n/a n/a n/a Note (1) Pitch or lead spacing P measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp Revision: 04-Aug-2020 Document Number: 42070 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague LEAD STYLE LEAD STYLE 1: LEAD STYLE 2: Straight leads, 0.1" [2.5 mm] lead space, uneven length Straight leads, 0.1" [2.5 mm] lead space, even length LEAD STYLE 3: LEAD STYLE 4: Straight leads, 0.2" [5 mm] lead space, uneven length Straight leads, 0.2" [5 mm] lead space, even length LEAD STYLE 6: LEAD STYLE 9: Shouldered leads, 0.2" [5 mm] lead space Snap-In leads, 0.2" [5 mm] lead space RATINGS, CASE CODES, AND LEAD STYLE CR μF RATED VOLTAGE UR AT +85 °C 3.0 V 6.3 V 10 V 16 V 20 V LEAD STYLE 25 V 35 V 50 V 0.10 A A 0.15 A A 0.22 A A 0.33 A B 0.47 A B 0.68 B C 1.0 A B D A B C E A B B C F A B C C D F A B C C D H N 1.5 2.2 3.3 4.7 A 6.8 A A B C D D E 10 B B B C D D F N 15 B B C D E E M N 22 C C C D F H M N 33 C C D E H M N 47 D D D F M M N 68 D D E M N N 100 E E M N N 150 H M M N 220 M M N R 330 N N R 470 N R 680 R R Revision: 04-Aug-2020 BULK AMMO / REEL 1, 2, 6, 9 2, 6 3, 4, 9 4 (except R case) Document Number: 42070 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CR (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) 489D MAX. DCL AT +25 °C (μA) 499D MAX. DF, 100 Hz AT +25 °C (%) 489D, 499D UR = 3 VDC AT +85 °C, SURGE = 4 V; UC = 2 VDC AT +125 °C, SURGE = 2.6 V (ONLY 499D) 6.8 A 489D685X(*)003A_ _ 1.0 0.5 6 10 B 489D106X(*)003B_ _ 1.0 0.5 8 15 B 489D156X(*)003B_ _ 1.0 0.5 8 22 C 489D226X(*)003C_ _ 1.0 0.5 8 33 C 489D336X(*)003C_ _ 1.4 0.7 8 47 D 489D476X(*)003D_ _ 2.1 1.1 8 68 D 489D686X(*)003D_ _ 3.0 1.6 8 100 E 489D107X(*)003E_ _ 4.5 2.4 10 150 H 489D157X(*)003H_ _ 6.7 3.6 10 220 M 489D227X(*)003M_ _ 9.9 5.2 10 330 N 489D337X(*)003N_ _ 14.8 7.9 10 470 N 489D477X(*)003N_ _ 21.1 11.2 12 680 R 489D687X(*)003R_ _ 30.6 16.3 12 UR = 6.3 VDC AT +85 °C, SURGE = 8 V; UC = 4 VDC AT +125 °C, SURGE = 5.2 V (ONLY 499D) 4.7 A 489D475X(*)6R3A_ _ 1.0 0.5 6 6.8 A 489D685X(*)6R3A_ _ 1.0 0.5 6 10 B 489D106X(*)6R3B_ _ 1.0 0.5 8 15 B 489D156X(*)6R3B_ _ 1.4 0.7 8 22 C 489D226X(*)6R3C_ _ 2.0 1.1 8 33 C 489D336X(*)6R3C_ _ 3.1 1.6 8 47 D 489D476X(*)6R3D_ _ 4.4 2.3 8 68 D 489D686X(*)6R3D_ _ 6.4 3.4 8 100 E 489D107X(*)6R3E_ _ 9.4 5.0 10 150 M 489D157X(*)6R3M_ _ 14.1 7.5 10 220 M 489D227X(*)6R3M_ _ 20.7 11.0 10 330 N 489D337X(*)6R3N_ _ 31.1 16.6 10 470 R 489D477X(*)6R3R_ _ 44.4 23.6 12 R 489D687X(*)6R3R_ _ 64.2 34.2 12 680 UR = 10 VDC AT +85 °C, SURGE = 13 V; UC = 7 VDC AT +125 °C, SURGE = 8.6 V (ONLY 499D) 3.3 A 489D335X(*)010A_ _ 1.0 0.5 4.7 A 489D475X(*)010A_ _ 1.0 0.5 6 6 6.8 B 489D685X(*)010B_ _ 1.0 0.5 6 10 B 489D106X(*)010B_ _ 1.5 0.8 8 15 C 489D156X(*)010C_ _ 2.2 1.2 8 22 C 489D226X(*)010C_ _ 3.3 1.7 8 33 D 489D336X(*)010D_ _ 4.9 2.6 8 47 D 489D476X(*)010D_ _ 7.0 3.7 8 68 E 489D686X(*)010E_ _ 10.2 5.4 8 100 M 489D107X(*)010M_ _ 15.0 8.0 10 150 M 489D157X(*)010M_ _ 22.5 12.0 10 220 N 489D227X(*)010N_ _ 33.0 17.6 10 330 R 489D337X(*)010R_ _ 49.5 26.4 10 Note 489D Type part number 489D, 499D (*) Insert 0 for ± 20 % tolerance or 9 for ± 10 % _ _ Case code / lead style see case code table Revision: 04-Aug-2020 Document Number: 42070 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CR (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) 489D MAX. DCL AT +25 °C (μA) 499D MAX. DF, 100 Hz AT +25 °C (%) 489D, 499D UR = 16 VDC AT +85 °C, SURGE = 20 V; UC = 10 VDC AT +125 °C, SURGE = 13 V (ONLY 499D) 2.2 A 489D225X(*)016A_ _ 1.0 0.5 6 3.3 B 489D335X(*)016B_ _ 1.0 0.5 6 4.7 B 489D475X(*)016B_ _ 1.1 0.6 6 6.8 C 489D685X(*)016C_ _ 1.6 0.8 6 10 C 489D106X(*)016C_ _ 2.4 1.2 8 15 D 489D156X(*)016D_ _ 3.6 1.9 8 22 D 489D226X(*)016D_ _ 5.2 2.8 8 33 E 489D336X(*)016E_ _ 7.9 4.2 8 47 F 489D476X(*)016F_ _ 11.2 6.0 8 68 M 489D686X(*)016M_ _ 16.3 8.7 8 100 N 489D107X(*)016N_ _ 24.0 12.8 10 150 N 489D157X(*)016N_ _ 36.0 19.2 10 220 R 489D227X(*)016R_ _ 52.8 28.1 10 UR = 20 VDC AT +85 °C, SURGE = 26 V; UC = 13 VDC AT +125 °C, SURGE = 16 V (ONLY 499D) 1.5 A 489D155X(*)020A_ _ 1.0 0.5 4 2.2 B 489D225X(*)020B_ _ 1.0 0.5 6 3.3 C 489D335X(*)020C_ _ 1.0 0.5 6 4.7 C 489D475X(*)020C_ _ 1.4 0.7 6 6.8 D 489D685X(*)020D_ _ 2.0 1.0 6 10 D 489D106X(*)020D_ _ 3.0 1.6 8 15 E 489D156X(*)020E_ _ 4.5 2.4 8 22 F 489D226X(*)020F_ _ 6.6 3.5 8 33 H 489D336X(*)020H_ _ 9.9 5.2 8 47 M 489D476X(*)020M_ _ 14.1 7.5 8 68 N 489D686X(*)020N_ _ 20.4 10.8 8 100 N 489D107X(*)020N_ _ 30.0 16.0 10 UR = 25 VDC AT +85 °C, SURGE = 32 V; UC = 17 VDC AT +125 °C, SURGE = 21 V (ONLY 499D) 1.0 A 489D105X(*)025A_ _ 1.0 0.5 4 1.5 B 489D155X(*)025B_ _ 1.0 0.5 4 2.2 B 489D225X(*)025B_ _ 1.0 0.5 6 3.3 C 489D335X(*)025C_ _ 1.2 0.6 6 4.7 C 489D475X(*)025C_ _ 1.7 0.9 6 6.8 D 489D685X(*)025D_ _ 2.5 1.3 6 10 D 489D106X(*)025D_ _ 3.7 2.0 8 15 E 489D156X(*)025E_ _ 5.6 3.0 8 22 H 489D226X(*)025H_ _ 8.2 4.4 8 33 M 489D336X(*)025M_ _ 12.3 6.6 8 47 M 489D476X(*)025M_ _ 17.6 9.4 8 68 N 489D686X(*)025N_ _ 25.5 13.6 8 Note 489D Type part number 489D, 499D (*) Insert 0 for ± 20 % tolerance or 9 for ± 10 % _ _ Case code / lead style see case code table Revision: 04-Aug-2020 Document Number: 42070 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CR (μF) CASE CODE MAX. DF, 100 Hz AT +25 °C (%) 489D, 499D MAX. DCL AT +25 °C (μA) 499D MAX. DCL AT +25 °C (μA) 489D PART NUMBER UR = 35 VDC AT +85 °C, SURGE = 46 V; UC = 23 VDC AT +125 °C, SURGE = 28 V (ONLY 499D) 0.10 A 489D104X(*)035A_ _ 1.0 0.5 4 0.15 A 489D154X(*)035A_ _ 1.0 0.5 4 0.22 A 489D224X(*)035A_ _ 1.0 0.5 4 0.33 A 489D334X(*)035A_ _ 1.0 0.5 4 0.47 A 489D474X(*)035A_ _ 1.0 0.5 4 0.68 B 489D684X(*)035B_ _ 1.0 0.5 4 1.0 B 489D105X(*)035B_ _ 1.0 0.5 4 1.5 C 489D155X(*)035C_ _ 1.0 0.5 4 2.2 C 489D225X(*)035C_ _ 1.1 0.6 6 3.3 D 489D335X(*)035D_ _ 1.7 0.9 6 4.7 D 489D475X(*)035D_ _ 2.4 1.3 6 6.8 E 489D685X(*)035E_ _ 3.5 1.9 6 10 F 489D106X(*)035F_ _ 5.2 2.8 8 15 M 489D156X(*)035M_ _ 7.8 4.2 8 22 M 489D226X(*)035M_ _ 11.5 6.1 8 33 N 489D336X(*)035N_ _ 17.3 9.2 8 N 489D476X(*)035N_ _ 24.6 13.1 8 47 UR = 50 VDC AT +85 °C, SURGE = 65 V; UC = 33 VDC AT +125 °C, SURGE = 40 V (ONLY 499D) 0.10 A 489D104X(*)050A_ _ 1.0 0.5 4 0.15 A 489D154X(*)050A_ _ 1.0 0.5 4 0.22 A 489D224X(*)050A_ _ 1.0 0.5 4 0.33 B 489D334X(*)050B_ _ 1.0 0.5 4 4 0.47 B 489D474X(*)050B_ _ 1.0 0.5 0.68 C 489D684X(*)050C_ _ 1.0 0.5 4 1.0 D 489D105X(*)050D_ _ 1.0 0.5 4 1.5 E 489D155X(*)050E_ _ 1.1 0.6 4 2.2 F 489D225X(*)050F_ _ 1.6 0.8 6 3.3 F 489D335X(*)050F_ _ 2.4 1.3 6 4.7 H 489D475X(*)050H_ _ 3.5 1.8 6 6.8 N 489D685X(*)050N_ _ 5.1 2.7 6 10 N 489D106X(*)050N_ _ 7.5 4.0 8 15 N 489D156X(*)050N_ _ 11.2 6.0 8 22 N 489D226X(*)050N_ _ 16.5 8.8 8 Note 489D Type part number 489D, 499D (*) Insert 0 for ± 20 % tolerance or 9 for ± 10 % _ _ Case code / lead style see case code table PACKAGING QUANTITIES CASE CODE A B C D BULK E F H M N 500 AMMOPACK 2500 2000 1500 500 REEL PACK 2500 2000 1500 500 Revision: 04-Aug-2020 R 100 Document Number: 42070 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague PERFORMANCE CHARACTERISTICS 1. Operating Temperature: -55 °C to +85 °C with rated DC voltage UR applied. +85 °C to +125° C with linear voltage derating to category voltage UC for 499D only (see general information) 2. Capacitance and Tolerance: capacitance measured at 100 Hz and +25 °C shall be within the specified tolerance limits of the nominal rating. Capacitance measurement shall be made by means of a polarized capacitance bridge. No polarizing voltage is required. The maximum voltage applied during measurements shall be 0.5 VRMS at 100 Hz and +25 °C. 3. Reverse Voltage: these capacitors are capable of withstanding peak voltage in the reverse direction equal to: 15 % of the rated DC voltage at +20 °C 10 % of the rated DC voltage at +25 °C 5 % of the rated DC voltage at +85 °C After test, capacitance change shall not exceed 10 % of initial value, dissipation factor and DC leakage current shall meet initial requirements at +25 °C - Table 2. 6. Life Test: after 2000 h at +85 °C with rated DC voltage applied, or after 1000 h at +125 °C. With derated DC voltage (only for 499D), capacitors shall meet the requirements in table below. Capacitance change DC leakage current Within initial requirements at +25 °C Dissipation factor Within initial requirements at +25 °C 7. Humidity Test: after 21 days (504 h) (1) at +40 °C, 90 % to 95 % of relative humidity (per IEC 68-2-3) with no voltage applied, capacitors shall meet the requirements in table below. Capacitance change Within ± 5 % of initial value DC leakage current Within initial requirements at +25 °C - Table 2 Dissipation factor Within initial requirements at +25 °C - Table 2 4. Surge Voltage: DC rated voltage at +85 °C (V) 3 6.3 10 16 20 25 35 50 DC surge voltage at +85 °C (V) 4 8 13 20 26 32 46 65 DC rated voltage at +125 °C (V) (1) 2 4 7 10 13 17 23 33 13 16 21 28 40 DC surge voltage at +125 °C (V) (1) 2.6 5.2 8.6 Note (1) For 499D Capacitors shall withstand the surge voltage applied in series with a 1000 Ω (± 5 %) resistor, at the rate of 1.5 min on, 5.5 min off for 1000 successive test cycles at +85 °C. Within ± 10 % of initial value Note (1) Humidity test is 56 days (1350 hours) for 499D 8. Marking: the capacitors shall be marked with the rated capacitance and the rated DC working voltage. A code may be used for both capacitance and voltage. Units rated at 6.3 volts are usually marked as 6 volts. The package shall be marked with full Vishay part number, date code, and quantity. 5. Stability at low and high temperatures: 489D - Table 2A TEMP. CAPACITANCE CHANGE DC LEAKAGE CURRENT (1) -55 °C -10 % of initial value ----------- +25 °C ------------- 0.015 CR x UR or 1 μA, whichever is greater +85 °C +10 % of initial value 0.15 CR x UR or 10 μA, whichever is greater TEMP. CAPACITANCE CHANGE DC LEAKAGE CURRENT (1) -55 °C -10 % of initial value ------------- +25 °C ------------ 0.008 CR x UR or 0.5 μA, whichever is greater +85 °C +10 % of initial value 0.08 CR x UR or 5 μA, whichever is greater +125 °C (2) +10 % of initial value 0.1 CR x UR or 6.25 μA, whichever is greater DISSIPATION FACTOR AT 100 Hz CR ≤ 1.5 μF 1.5 μF < CR < 10 μF 10 μF < CR < 100 μF 100 μF ≤ CR ≤ 330 μF 330 μF < CR 4 % max. 6 % max. 8 % max. 10 % max. 12 % max. DISSIPATION FACTOR AT 100 Hz CR ≤ 1.5 μF 1.5 μF < CR < 10 μF 10 μF < CR < 100 μF 100 μF ≤ CR ≤ 330 μF 330 μF < CR 4 % max. 6 % max. 8 % max. 10 % max. 12 % max. Notes (1) Rated voltage applied for 5 min with a series resistor of 1000 Ω (2) Only for 499D Revision: 04-Aug-2020 Document Number: 42070 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I RMS = P -----------R ESR where, P = power dissipation in W at +25 °C as given below RESR = the capacitor Equivalent Series Resistance at the specified frequency 2. AC Ripple Voltage: the maximum allowable ripple voltage shall be determined from the formula: V RMS = P ------------ x Z R ESR 4. Power Dissipation: power dissipation will be affected by the heat sinking capability of the mounting surface. Non-sinusoidal ripple current may produce heating effects which differ from those shown in the following table. It is important that the equivalent IRMS value be established when calculating permissible operating levels. CASE CODE POWER DISSIPATION AT +25 °C (W) A 0.080 B 0.090 C 0.100 D 0.110 E 0.120 F 0.130 H 0.140 where, M 0.150 Z = the capacitor impedance at the specified frequency N 0.160 R 0.180 3. AC Ripple Current or Voltage Derating Factor: if these capacitors are to be operated at temperatures above +25 °C, the permissible RMS ripple current or voltage shall be calculated using the derating factors in the table below: TEMPERATURE DERATING FACTOR +25 °C 1.0 +55 °C 0.9 +85 °C 0.8 +125 °C 0.4 5. Cleaning: these capacitors are compatible with all commonly used solvents, such as TES, TMS, Prelete and Chloretane. Solvents containing methylene chloride or other epoxy solvents should be avoided since these will attack the epoxy encapsulation material. PRODUCT INFORMATION Mounting of Through Hole Components www.vishay.com/doc?40108 Solid Tantalum Capacitors (With MnO2 Electrolyte) Voltage Derating www.vishay.com/doc?40246 SELECTOR GUIDES Quick Reference Guide www.vishay.com/doc?40037 Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?40033 FAQ Frequently Asked Questions Revision: 04-Aug-2020 www.vishay.com/doc?40110 Document Number: 42070 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 489D, 499D www.vishay.com Vishay Sprague TAPE PACKAGING DIMENSIONS in inches [millimeters] per EIA-468 (available on reel or in ammo box) 'h P2 'P P P2 P H1 P1 F H P1 W2 F H0 L W1 W0 W t Unreeling direction SYMBOL DESCRIPTION P0 D0 DIMENSIONS TOLERANCE P Component pitch 0.500 [12.7] ± 0.039 [± 1.0] P0 Feed hole pitch 0.500 [12.7] ± 0.012 [± 0.3] W Tape width 0.709 [18.0] +0.039 / -0.020 [+1.0 / -0.5] W0 Hold down tape width 0.20 [5.0] Minimum W1 Feed hole position 0.354 [9.0] +0.030 / -0.020 [+0.075 / -0.5] W2 Hold down tape position 0.118 [3.0] Maximum H1 Overall component height above tape central line 1.26 [32.0] Maximum D0 Feed hole diameter 0.157 [4.0] ± 0.012 [± 0.3] Tape thickness 0.028 [0.7] Maximum H0 Height to seating plane (style 6 - shouldered leads) 0.63 [16.0] ± 0.02 [± 0.5] H Height to seating plane (styles 2 and 4 - straight leads) 0.748 [19.0] ± 0.039 [± 1.0] F Pitch, or lead wire spacing t See lead styles dimensions table ΔP Component alignment 0.051 [1.3] Maximum ΔH Component alignment 0.079 [2.0] Maximum Length of shipped leads 0.433 [11.0] Maximum Feed hole center to wire center (lead spacing 2.5 mm) 0.20 [5.1] ± 0.028 [± 0.7] Feed hole center to wire center (lead spacing 5.0 mm) 0.144 [3.65] ± 0.028 [± 0.7] Feed hole center to component center 0.25 [6.35] ± 0.051 [± 1.3] L P1 P2 Revision: 04-Aug-2020 Document Number: 42070 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000