Model 533, 534, 535
www.vishay.com
7/
8"
Vishay Spectrol
(22.2 mm) Multi Turn Wirewound Potentiometer 533: 3 Turns / 534: 10 Turns / 535: 5 Turns
FEATURES
• Bushing and servo mount designs available
• Linearity ± 0.25 %, down to 0.05 % on request
• Special resistance tolerances to 1 %
• Rear shaft extensions and support bearing
DESIGN SUPPORT TOOLS
• Metric shaft available
click logo to get started
• Dual gang configuration and concentric shafts
• High torque, center tap, slipping clutch on request
Models
Available
• Special markings and front shaft extensions
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, multi turn wirewound
Output type
Output by turrets
Market appliance
Industrial
7/ "
8
Dimensions
(22.2 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
MODEL 533
MODEL 534
MODEL 535
Resistance range - standard values
50 to 20 k
100 to 100 k
50 to 50 k
Capability range
5 to 60 k
10 to 200 k
5 to 100 k
±5%
±5%
±5%
Standard tolerance
Linearity (independent)
± 0.25 %
± 0.25 %
± 0.25 %
Noise
100 ENR
100 ENR
100 ENR
Rotation (electrical and mechanical)
1080° +10°
3600° +10°
1800° +10°
Power rating (at 70 °C)
-0°
-0°
1.0 W
2.0 W
Insulation resistance
1000 M minimum 500 VDC
Dielectric strength
1000 VRMS minimum 60 Hz
Absolute minimum resistance
Not to exceed linearity x total resistance or 1 , whichever is greater
Temperature coefficient
20 ppm/°C (standard values, wire only)
End voltage
Phasing
0.25 % of total applied voltage, maximum
CCW end points - section 2 phased to section 1 within ± 2°
Taps
Center tap only
MARKING
Unit identification
Revision: 17-May-2018
-0°
1.5 W
RESISTANCE VALUES
Manufacturer’s name and model number,
resistance value and tolerance, linearity
specification date code and terminal
identification.
Example of a marking for a standard part:
534-11103
533 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K
534 (
100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K
535 (
50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K
Document Number: 57065
1
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 533, 534, 535
www.vishay.com
Vishay Spectrol
ORDERING INFORMATION
5
3
4
B
2
MODEL
STYLE
GANGS
533
534
535
B: bushing
S: servo
1
2
1
0
3
OHMIC VALUE
GANGS No 1
470 = 47
222 = 2.200
103 = 10 k
For ohmic value
range see
electrical
specification
2
0
OHMIC VALUE
GANGS No 2
470 = 47
222 = 2.200
103 = 10 k
For ohmic value
range see
electrical
specification
3
J
TOLERANCE ON
OHMIC VALUE
J=±5%
F=±1%
C
4
7
0
LINEARITY
SPECIAL REQUEST
C = ± 0.25 %
L = ± 0.2 %
Special code
xxxx
PART NUMBER DESCRIPTION (for information only)
534-
1
2
103
203
xxxx
MODEL
STYLE
GANGS
OHMIC VALUE
GANGS No 1
OHMIC VALUE
GANGS No 2
SPECIAL
B: 1
S: 2
SINGLE SECTION DIMENSIONS in inches (millimeters)
± 0.015
± 0.031
0.812 (20.62)
0.750 (19.05)
± 0.015
0.312 (7.92)
0.030 MAX. (0.76)
0.062 (1.57)
0.200 MIN. (5.08)
BUSHING
MOUNT MODEL:
534B/534-1
METRIC SHAFT: 534B...8872
2
1
3
+ 0.0000
Ø 0.2497 (6.34) - 0.0003
± 0.015
+ 0.0000
- 0.0020
Ø 0.4062
(10.32)
Ø 0.875
(22.22)
+ 0.000
Ø 6.00 mm - 0.0003
± 0.010
0.032 x 0.032
(0.81) x (0.81) DP
3/
- 32UNEF - 2A
SCREWDRIVER SLOT
± 0.031
0.850 (21.59) ± 0.015
0.375 (9.52)
9 mm x 0.75 P
8
0.062 (1.57)
0.057 (1.45) MIN.
SERVO
MOUNT MODEL:
534S/534-2
2
Ø 0.875
(22.22)
30°
TYP.
0.062 (1.57)
0.300 (7.62) MIN.
1
3
± 0.015
R 0.625 MAX.
(15.88)
+ 0.0000
Ø 0.7500 (19.05) - 0.0005
Ø 0.1248 (3.17)
+ 0.0000
- 0.0003
2
CW
Ø 0.750 (19.05) MAX.
Ø 0.875 (22.22)
1
3
SCHEMATIC
Mounting hardware, washer and panel nut, nickel plated
Revision: 17-May-2018
Document Number: 57065
2
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 533, 534, 535
www.vishay.com
Vishay Spectrol
MECHANICAL SPECIFICATIONS
PARAMETER
Bearing type
Bushing: sleeve bearing
Servo: ball bearing
Torque (maximums): starting
Section 1
Section 2
534
0.5 oz.-in (36 g-cm)
0.9 oz.-in (65 g-cm)
533/535
0.7 oz.-in (50 g-cm)
1.1 oz.-in (79 g-cm)
Torque (maximums): running
Section 1
Section 2
534
0.4 oz.-in (28.80 g-cm)
0.7 oz.-in (50.40 g-cm)
533/535
0.6 oz.-in (43.20 g-cm)
0.9 oz.-in (64.8 g-cm)
Weight (maximums)
Section1
Section 2
0.75 oz. (21.26 g)
1.25 oz. (35.44 g)
Stop strength
75 oz.-in (static) (5.4 kg-cm)
Ganging
2 sections maximum
POWER RATING CHART
ENVIRONMENTAL SPECIFICATIONS
4
Vibration
Shock
534
RATED POWER IN W
15 g thru 2000 Hz
3
50 g
Rotational life (shaft revolution)
533
534
534 (servo)
535
535
2
533
300 000
1 000 000
> 1 000 000
500 000
Load life
900 h
Temperature range
1
-55 °C to +125 °C
Note
• Nothing stated herein shall be construed as a guarantee of
quality or durability
0
0
20
40
60
80
100
120
140
160
AMBIENT TEMPERATURE IN °C
RESISTANCE ELEMENT DATA
RESISTANCE VALUE
()
RESOLUTION
(%)
OHMS PER TURN
MAXIMUM CURRENT
AT 70 °C AMBIENT
(mA)
MAXIMUM VOLTAGE
ACROSS COIL
(V)
533
534
535
533
534
535
533
534
535
533
534
535
533
534
535
50
-
50
0.149
-
0.120
0.0746
-
0.0603
141.0
-
173.0
7.07
-
8.66
100
100
100
0.111
0.060
0.075
0.1114
0.0603
0.0746
100.0
141.0
122.0
10.0
14.1
12.2
200
200
200
0.097
0.037
0.061
0.1954
0.0746
0.1220
70.7
100.0
86.6
14.1
20.0
17.3
500
500
500
0.069
0.031
0.049
0.3424
0.1520
0.2459
44.7
63.2
54.7
22.4
31.6
27.4
1K
1K
1K
0.063
0.025
0.041
0.6331
0.2459
0.4113
31.6
44.7
38.7
31.6
44.7
38.7
2K
2K
2K
0.041
0.021
0.031
0.8206
0.4113
0.6331
22.4
31.6
27.4
44.7
63.2
54.8
5K
5K
5K
0.044
0.016
0.034
2.2330
0.8206
1.7230
14.1
20.0
17.3
70.7
100.0
86.6
10K
10K
10K
0.034
0.017
0.030
3.4510
1.7230
3.0160
10.0
14.1
12.2
100.0
141.0
122.0
20K
20K
20K
0.031
0.015
0.020
6.1790
3.0160
3.9910
7.07
10.0
8.66
141.0
200.0
173.0
-
50K
50K
-
0.009
0.015
-
4.6690
7.4560
-
6.32
5.47
-
316.0
274.0
-
100K
-
-
0.007
-
-
7.4560
-
-
4.47
-
-
447.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Revision: 17-May-2018
Document Number: 57065
3
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000