536-1-1-203

Model 536 www.vishay.com 7/ Vishay Spectrol 8" (22.2 mm) Ten Turn Wirewound Precision Potentiometer with a Plastic Shaft FEATURES • 10 standard resistance values • Plastic shaft • Rugged integrated construction • 0.25 % linearity • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, multi turn wirewound Output type Output by turrets Market appliance Industrial 7/ " 8 Dimensions (22.2 mm) ELECTRICAL SPECIFICATIONS PARAMETER Range 100  to 100 k, tolerance ± 5 % Total resistance Linearity (independent) ± 0.25 % 100  ENR maximum Noise Electrical angle 3600° +10° - 0° Power rating 2.0 W at 70 °C derated to zero at 125 °C Insulation resistance 1000 M minimum, 500 VDC Dielectric strength 1000 VRMS, 60 Hz Not to exceed 0.10 % of total resistance or 1 , whichever is greater Absolute minimum resistance Temperature coefficient 20 ppm/°C (wire only) End voltage 0.25 % of total applied voltage maximum ORDERING INFORMATION 5 3 6 B 1 0 3 MODEL STYLE OHMIC VALUE SPECIAL REQUEST 536 B: bushing 470 = 47  222 = 2.200  103 = 10 k For ohmic value range see electrical specification xxxx PART NUMBER DESCRIPTION (for information only) 536- 1- 103 xxxx MODEL STYLE OHMIC VALUE SPECIAL B: 1 Revision: 30-Jun-15 Document Number: 57066 1 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Model 536 www.vishay.com Vishay Spectrol DIMENSIONS in inches (millimeters) BUSHING MOUNT: 536B/536-1 ± 0.015 0.750 (19.05) ± 0.031 0.812 (20.62) ± 0.015 0.312 (7.92) 0.062 (1.57) 0.200 MIN. (5.08) 0.030 MAX. (0.76) 3/ 8 - 32 UNEF - 2A 30° 2 1 0.625 R MAX. (15.88) 3 ± 0.015 + 0.0000 Ø 0.875 (22.22) Ø 0.4062 - 0.0020 (10.32) + 0.000 - 0.002 Ø 0.250 (6.35) SCREWDRIVER SLOT 0.032 WIDE x 0.032 ± 0.010 DEEP (0.81 x 0.81) METRIC SHAFT/BUSHING THREAD 9 mm: 0.75 P Ø 6.00 2 + 0.00 - 0.05 CW 3 1 SCHEMATIC TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS ± 0.005 ANGLES ± 2° MECHANICAL SPECIFICATIONS PARAMETER Rotation 3600° +10° - 0° Torque (maximums) Mechanical runouts Shaft (TIR) Pilot dia. (TIR) Lateral runout (TIR)  Shaft end play  Shaft radial play Weight (maximum) Stop strength Revision: 30-Jun-15 STARTING 0.5 oz. - in (36.00 g - cm) RUNNING 0.4 oz. - in (28.80 g - cm) 0.005" (0.13 cm) 0.003" (0.08 cm) 0.005" (0.13 cm) 0.010" (0.25 cm) 0.005" (0.13 cm) 0.75 oz. (21.26 g) 75 oz. - in (static) (5.4 kg - cm) Document Number: 57066 2 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Model 536 www.vishay.com Vishay Spectrol RESISTANCE ELEMENT DATA MATERIAL SPECIFICATIONS Front lid Stainless steel and nickel plated brass bushing Housing Thermoplastic nylon glass filled STANDARD OHMS RESISTANCE RESOLUTION PER VALUES (%) TURN () MAXIMUM CURRENT AT 70 °C AMBIENT (mA) MAXIMUM VOLTAGE ACROSS COIL (V) Rear lid Thermo-glass filled Shaft Thermo-glass filled 100 0.060 0.0603 141.0 14.1 Brass plated for solderability 200 0.037 0.0746 100.0 20.0 500 0.031 0.1520 63.2 31.6 1K 0.025 0.2459 44.7 44.7 2K 0.021 0.4113 31.6 63.2 Terminals Mounting hardware Lockwasher internal tooth: Panel nut: Steel nickel plated Brass, nickel plated 5K 0.016 0.8206 20.0 100.0 ENVIRONMENTAL SPECIFICATIONS 10K 0.017 1.7230 14.1 141.0 Vibration 15 g thru 2000 Hz 20K 0.015 3.0160 10.0 200.0 50 g 50K 0.009 4.6690 6.32 316.0 1 million shaft revolutions 100K 0.007 7.4560 4.47 447.0 Shock Rotational life Load life 900 h Operating temperature range -55 °C to +125 °C Note • Nothing stated herein shall be construed as a guarantee of quality or durability. POWER RATING CHART MARKING Unit identification Units shall be marked with Vishay Spectrol name and model no, resistance, resistance tolerance, linearity, terminal identification and date code. Example of a marking for a standard part: 536-1-1-502 RATED POWER IN W 4 3 2 1 0 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE IN °C Revision: 30-Jun-15 Document Number: 57066 3 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000