592D226X96R3A2T10H

592D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT™, Low Profile, Conformal Coated, Maximum CV FEATURES • New robust ratings for pulsed applications • 1.0 mm to 2.5 mm height Available • Terminations: 100 % matte tin (2) standard, tin / lead available Available • Mounting: surface mount • 8 mm, 12 mm tape and reel packaging available per EIA 481 and reeling per IEC 60286-3 7" [178 mm] standard 13" [330 mm] available • Case code compatibility with EIA 535BAAC and CECC 30801 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Parametric Search Available • See also 592W for additional ratings designs for pulsed applications Calculators • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details www.vishay.com/doc?40194 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 1 μF to 2200 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC Moisture Sensitivity Level 2a ORDERING INFORMATION 592D 106 X0 010 B 2 T 15H TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C CASE CODE TERMINATION REEL SIZE AND PACKAGING SUFFIX This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = gold plated 8 = solder plated 60/40 Special order T = tape and reel 7" [178 mm] reel W = 13" [330 mm] reel Maximum height (mm) see Standard Ratings table Note • Preferred tolerance and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance or lower ESR (e.g., 591D series) Revision: 11-Apr-2022 Document Number: 40004 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. B D REF. J MAX. J MAX. A H (1) CASE CODE L MAX. A 0.146 [3.7] B 0.157 [4.0] C 0.28 [7.1] D 0.295 [7.5] M 0.295 [7.5] R 0.283 [7.2] S 0.138 [3.5] X 0.571 [14.5] W 0.071 ± 0.012 [1.8 ± 0.3] 0.110 + 0.012 / - 0.024 [2.8 + 0.3 / - 0.6] 0.126 ± 0.012 [3.2 ± 0.3] 0.169 ± 0.012 [4.3 ± 0.3] 0.248 ± 0.012 [6.3 ± 0.3] 0.236 + 0.012 / - 0.024 [6.0 + 0.3 / - 0.6] 0.063 ± 0.012 [1.6 ± 0.3] 0.290 + 0.010 / - 0.020 [7.37 + 0.25 / - 0.5] A 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.016 [1.3 ± 0.4] B 0.087 ± 0.016 [2.2 ± 0.4] 0.098 ± 0.016 [2.5 ± 0.4] 0.173 ± 0.024 [4.4 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.200 ± 0.024 [5.1 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.079 ± 0.012 [2.0 ± 0.3] 0.469 ± 0.024 [11.9 ± 0.6] D REF. J MAX. 0.114 [2.9] 0.004 [0.1] 0.138 [3.5] 0.004 [0.1] 0.236 [6.0] 0.004 [0.1] 0.252 [6.4] 0.004 [0.1] 0.264 [6.7] 0.004 [0.1] 0.244 [6.2] 0.004 [0.1] 0.106 [2.7] 0.004 [0.1] 0.52 [13.2] 0.004 [0.1] 35 V A/B B B/C C/D B/C/D/R D/R R 50 V B Notes • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] (1) For package height, please refer to specific rating in the “Standard Ratings” table RATINGS AND CASE CODES μF 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 220 330 470 680 1000 1500 2200 4V A/B B C B/C/D A/B/C/D/R B/C/D/R C/D/R C/D C/D/R D/R R X X Revision: 11-Apr-2022 6.3 V A A/B A/B A/B/C/S A/B/C/D B/C/D/R B/C/D/R C C/D/R C/D/R C/D/R C/D/R R R/X M/R/X X 10 V 16 V A A A/B B A/B/C C/D B/D/R B/C/D/R B/C/D/R A A/B B/C B/C/D B/C/D B/C/D/R B/C/R C/D C/D C/D D/R D/R D/R R 20 V 25 V A A/B B/C C C/D B/D/R R A/B B/C B/C/D C/D/R B/D/R R C C C/R R R C D R R X Document Number: 40004 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 592D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE CASE (μF) CODE 22 22 33 47 68 68 68 100 100 100 100 100 150 150 150 150 220 220 220 330 330 470 470 470 470 470 680 680 1000 1500 2200 2200 A B B C B C D A B C D R B C D R C D R C D C D D D R D R R X X X 10 15 15 22 22 22 22 33 33 33 33 47 47 47 47 A A B A A A B A B C S A A B B PART NUMBER HEIGHT MAX. (mm) MAX. DCL AT +25 °C (μA) 4 VDC AT +85 °C; 2.7 VDC AT +125 °C 592D226(1)004A(2)(3)15H 1.5 0.9 592D226(1)004B(2)(3)15H 1.5 0.9 592D336(1)004B(2)(3)15H 1.5 1.3 592D476(1)004C(2)(3)15H 1.5 1.9 592D686(1)004B(2)(3)15H 1.5 2.7 592D686(1)004C(2)(3)15H 1.5 2.7 592D686(1)004D(2)(3)15H 1.5 2.7 592D107(1)004A(2)(3)12H 1.2 4.0 592D107(1)004B(2)(3)20H 2.0 4.0 592D107(1)004C(2)(3)15H 1.5 4.0 592D107(1)004D(2)(3)15H 1.5 4.0 592D107(1)004R(2)(3)15H 1.5 4.0 592D157(1)004B(2)(3)20H 2.0 6.0 592D157(1)004C(2)(3)15H 1.5 6.0 592D157(1)004D(2)(3)15H 1.5 6.0 592D157(1)004R(2)(3)15H 1.5 6.0 592D227(1)004C(2)(3)20H 2.0 8.8 592D227(1)004D(2)(3)15H 1.5 8.8 592D227(1)004R(2)(3)15H 1.5 8.8 592D337(1)004C(2)(3)20H 2.0 13.2 592D337(1)004D(2)(3)20H 2.0 13.2 592D477(1)004C(2)(3)20H 2.0 18.8 592D477(1)004D(2)(3)14H 1.4 18.8 592D477(1)004D(2)(3)15H 1.5 18.8 592D477(1)004D(2)(3)20H 2.0 18.8 592D477(1)004R(2)(3)20H 2.0 18.8 592D687(1)004D(2)(3)20H 2.0 27.2 592D687(1)004R(2)(3)20H 2.0 27.2 592D108(1)004R(2)(3)20H 2.0 40.0 592D158(1)004X(2)(3)20H 2.0 60.0 592D228(1)004X(2)(3)20H 2.0 88.0 592D228(1)004X(2)(3)25H 2.5 88.0 6.3 VDC AT +85 °C; 4 VDC AT +125 °C 592D106(1)6R3A(2)(3)15H 1.5 0.6 592D156(1)6R3A(2)(3)15H 1.5 0.9 592D156(1)6R3B(2)(3)15H 1.5 0.9 592D226(1)6R3A(2)(3)10H 1.0 1.4 592D226(1)6R3A(2)(3)13H 1.3 1.4 592D226(1)6R3A(2)(3)15H 1.5 1.4 592D226(1)6R3B(2)(3)15H 1.5 1.4 592D336(1)6R3A(2)(3)15H 1.5 2.1 592D336(1)6R3B(2)(3)15H 1.5 2.1 592D336(1)6R3C(2)(3)15H 1.5 2.1 592D336(1)6R3S(2)(3)12H 1.2 2.1 592D476(1)6R3A(2)(3)13H 1.3 2.7 592D476(1)6R3A(2)(3)15H 1.5 2.7 592D476(1)6R3B(2)(3)12H 1.2 3.0 592D476(1)6R3B(2)(3)15H 1.5 3.0 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 24 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 12 12 14 20 25 25 2.400 1.600 1.600 0.400 1.400 0.350 0.270 1.000 0.450 0.450 0.350 0.260 0.450 0.450 0.360 0.250 0.200 0.200 0.190 0.120 0.120 0.100 0.140 0.140 0.100 0.100 0.100 0.100 0.200 0.040 0.055 0.040 0.16 0.22 0.22 0.50 0.24 0.53 0.68 0.23 0.42 0.47 0.60 0.76 0.42 0.47 0.59 0.77 0.74 0.79 0.89 0.96 1.02 1.05 0.93 0.94 1.18 1.32 1.18 1.32 0.94 2.09 1.78 2.12 6 6 6 12 6 6 6 6 6 6 10 14 14 8 8 2.700 2.500 1.700 4.000 1.500 1.500 1.500 1.700 1.400 0.400 2.000 2.000 2.000 1.400 1.400 0.15 0.15 0.22 0.11 0.19 0.20 0.23 0.19 0.24 0.50 0.17 0.16 0.17 0.23 0.24 Note • Part number definitions: (1) Tolerance: for 10 % tolerance, specify “X9”; for 20 % tolerance, change to “X0” (2) Termination: for 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: for 7" reels specify “T”, for 13" reels specify “W” Revision: 11-Apr-2022 Document Number: 40004 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000