597D227X0020R2T

V I S H AY I N T E R T E C H N O L O G Y, I N C . I INNOVAT AND TEC O L OGY 597D Tantalum N HN CAPACITORS O 19 62-2012 Capacitors - State-of-the-art CV Tantalums 75 V Rated Tantalum Capacitors Industrial-Grade KEY BENEFITS • • • • Highest available capacitance and voltage Ultra-low ESR as low as 0.015 Ω State-of-the-art CV in a wide variety of case sizes Tin/lead (Sn/Pb) terminations standard; 100 % tin available APPLICATIONS • Power management • Industrial automation and control systems • Commercial avionics RESOURCES • Datasheet: http://www.vishay.com/doc?40047 • Tantalum product portfolio: http://www.vishay.com/capacitors/tantalum/ • Reliability calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/ tantalum-wet/ tantalum-reliability-calculator-list/ • Technical questions: contact tantalum@vishay.com • Sales contacts: http://www.vishay.com/doc?99914 • Material categorization: For definitions of compliance please see http://www.vishay.com/ doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9120 1210 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 • • • • Extremely low ESR Mounting: Surface mount Ripple current up to 4.1 A Material categorization: definitions IS H AY I N T EFor RTE C H N O LofOcompliance G Y, I N C . pleaseVsee www.vishay.com/doc?99912 I INNOVAT 597D Tantalum PERFORMANCE CHARACTERISTICS O L OGY CAPACITORS HN Note AND TEC N O * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. Capacitance Range: 10 μF to 1500 μF 19 12 6 Capacitance Tolerance: ± 10 %, ± 20 % standard 2 - 2 0 Voltage Rating: 4 VDC to 75 VDC www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitors - State-of-the-art CV Tantalums ORDERING INFORMATION 597D 687 X0 6R3 E 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE TERMINATION REEL SIZE AND PACKAGING This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 8 = Solder plated (60/40) special order T = Tape and reel 7" [178 mm] reel Note • Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal J W L H D B A CASE CODE V D E R F Z M H L (MAX.) 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.315 [8.0] 0.315 [8.0] W 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] www.vishay.com H 0.079 [2.0 max.] 0.138 [3.5 max.] 0.157 ± 0.016 [4.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.185 ± 0.016 [4.7 ± 0.4] 0.236 ± 0.016 [6.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.205 ± 0.016 [5.2 ± 0.4] A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.055 ± 0.016 [1.4 ± 0.4] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] Note • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] Revision: 11-Apr-12 RATINGS AND B 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] D (REF.) 0.252 [6.4] 0.252 [6.4] 0.252 [6.4] 0.244 [6.2] 0.244 [6.2] 0.244 [6.2] 0.260 [6.6] 0.260 [6.6] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 597D Vishay Sprague Document Number: 40047 1 For technical questions, contact: tantalum@vishay.com μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 63 V 75 V THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT D R 10 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 15 E/R R 22 R F 33 F 47 R Z 68 R F 100 F F 150 F 220 E R M 330 V E F H 470 V E E H 680 E E R 1000 E/R R F 1500 R 2200 CASE CODES STANDARD RATINGS PRODUCT SHEET 2/2 VMN-PT9120 1210 MAX. RIPPLE MAX. DF MAX. ESR MAX. DCL 100 kHz CAPACITANCE AT + 25 °C AT + 25 °C CASE CODE PART NUMBER AT + 25 °C IRMS (μF) 120 Hz 100 kHz THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS(μA) DESCRIBED HEREIN ARE SUBJECT (A) TO (%) AND THIS DOCUMENT (m) SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C 470 V 597D477(1)004V(2)(3) 19 8 60 2.2