60HQ100

Bulletin PD-2.055 rev. E 11/02 60HQ... SERIES SCHOTTKY RECTIFIER 60 Amp TO-203AB (DO-5) Major Ratings and Characteristics Description/ Features Characteristics 60HQ... Units IF(AV) Rectangular 60 A 60, 80 to 100 V IFSM @ tp = 5 µs sine 8400 A VF @ 60 Apk, TJ=125°C 0.70 V TJ range - 65 to 175 °C waveform VRRM range The 60HQ Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 °C TJ operation Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Hermetic packaging Conforms to JEDEC Outline DO-203AB (DO-5) Dimensions in millimeters and (inches) www.irf.com 1 60HQ... Series Bulletin PD-2.055 rev. E 11/02 Voltage Ratings Part number VR 60HQ060 60HQ080 60HQ090 60HQ100 60 80 90 100 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 60HQ Units IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 60 Max. Peak One Cycle Non-Repetitive 8400 Surge Current * See Fig. 7 1200 A A EAS Non-Repetitive Avalanche Energy 15 mJ IAR Repetitive Avalanche Current 1 A Conditions 50% duty cycle @ TC = 118 °C, rectangular wave form 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1 Amps, L = 30 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) * See Fig. 1 IRM 60HQ Units Conditions 0.89 V @ 60A 1.09 V @ 120A 0.70 V @ 60A 0.84 V @ 120A Max. Reverse Leakage Current (1) 1.5 mA TJ = 25 °C * See Fig. 2 20 mA TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = rated VR CT Max. Junction Capacitance 1400 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 7.5 nH Measured from top of terminal to mounting plane 10000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 60HQ Units °C Conditions TJ Max. Junction Temperature Range -65 to 175 Tstg Max. Storage Temperature Range -65 to 175 °C RthJC Max. Thermal Resistance Junction to Case 0.83 °C/W DC operation RthCS Typical Thermal Resistance, Case to 0.25 °C/W Mounting surface , smooth and greased * See Fig. 4 Heatsink wt Approximate Weight T Mounting Torque Case Style 2 15 (0.53) g (oz.) Min. 23 (20) Max. 46 (40) Kg-cm Non-lubricated threads (Ibf-in) DO-203AB(DO-5) JEDEC www.irf.com 60HQ... Series Bulletin PD-2.055 rev. E 11/02 1000 Reverse Current - I R (mA) 1000 150°C 10 125°C 1 100°C 0.4 0.6 0.8 1 20 40 60 80 100 10000 1 0.2 0 Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage TJ = 25°C 0 25°C Reverse Voltage - V R (V) TJ = 125°C 0.1 50°C 0.01 TJ = 175°C 10 75°C 0.1 0.001 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 TJ = 175°C 100 1.2 T J = 25°C 1000 100 1.4 0 10 20 30 40 50 60 70 80 90 100110 Reverse Voltage - VR (V) Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance - Z thJC (°C/W) 1 D = 0.50 D = 0.33 D = 0.25 0.1 D = 0.17 PDM D = 0.08 0.01 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC+ T C Single Pulse (Thermal Resistance) 0.001 0.00001 t1 t2 0.0001 0.001 0.01 0.1 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 60HQ... Series Bulletin PD-2.055 rev. E 11/02 60 R thJC (DC) = 0.83°C/W 170 Average Power Loss - (Watts) Allowable Case Temperature - (°C) 180 160 150 DC 140 130 120 0 20 40 60 80 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 50 40 DC 30 RMS Limit 20 10 0 100 0 Average Forward Current - I F(AV) (A) 10 20 30 40 50 60 70 80 90 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 1000 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 60HQ... Series Bulletin PD-2.055 rev. E 11/02 Data and specifications subject to change without notice. This product has been designed for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/02 www.irf.com 5