6CWQ10FNTR

Bulletin PD-20529 rev. H 05/06 6CWQ10FN SCHOTTKY RECTIFIER 7 Amp IF(AV) = 7Amp VR = 100V Major Ratings and Characteristics Description/ Features Characteristics Vaues Units IF(AV) Rectangular waveform 7 A VRRM 100 V IFSM @ tp = 5 μs sine 440 A VF @ 3 Apk, T J = 125°C 0.63 V TJ range The 6CWQ10FN surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation (per leg) - 40 to 150 °C Guard ring for enhanced ruggedness and long term reliability Case Styles Base Common Cathode 4 2 Common 1 Cathode Anode 3 Anode D-PAK (TO-252AA) Document Number: 93386 www.vishay.com 1 6CWQ10FN Bulletin PD-20529 rev. H 05/06 Voltage Ratings Part number VR 6CWQ10FN Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 6CWQ... Units IF(AV) Max. Average Forward (Per Leg) Current * See Fig. 5 IFSM 3.5 (Per Device) A Conditions 50% duty cycle @ TC = 135°C, rectangular wave form 7 Max. Peak One Cycle Non-Repetitive 440 Surge Current (Per Leg) * See Fig. 7 70 EAS Non-Repetit. Avalanche Energy (Per Leg) 5.0 mJ IAR Repetitive Avalanche Current (Per Leg) 0.5 A A 5μs Sine or 3μs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 °C, IAS = 1 Amp, L = 10 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 6CWQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions 0.81 0.96 0.63 V V V @ 3A @ 6A @ 3A 0.74 V @ 6A 1 mA TJ = 25 °C 4.9 mA TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C VR = rated VR VF(TO) Threshold Voltage 0.48 V rt Forward Slope Resistance 30.89 mΩ CT Typ. Junction Capacitance (Per Leg) 92 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body 10000 V/μs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300μs, Duty Cycle