80D102P200ME2DE3

80D www.vishay.com Vishay Sprague Aluminum Capacitors +85 °C, Snap-In FEATURES • Useful life: 2000 h at +85 °C • General purpose • Polarized aluminum electrolytic capacitors, non-solid electrolyte • High ripple capability • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS VALUE TEMPERATURE Nominal case size Ø D x L in inches (mm) 1.38 x 3.15 (35.0 x 80.0) AMBIENT TEMPERATURE MULTIPLIERS Operating temperature -40 °C to +85 °C -55 °C -65 °C -75 °C -85 °C 2.0 1.7 1.4 1.0 Rated capacitance range, CR 82 μF to 56 000 μF Tolerance on CR -10 %, +30 % Rated voltage range, UR FREQUENCY (Hz) 6.3 WVDC to 250 WVDC Termination Snap mount WVDC 50 TO 60 300 TO 1000 1000 AND UP 0 to 49 50 to 199 200 to 250 0.85 0.83 0.80 1.10 1.15 1.30 1.15 1.20 1.40 Life validation test  2000 h at 85 °C CAP  15 % from initial measurement. ESR  1.5 x initial specified limit. DCL  initial specified limit Shelf life  500 h at 85 °C CAP  15 % from initial measurement. ESR  1.3 x initial specified limit. DCL  2 x initial specified limit Nominal Diameter 0.984 (25.0) 1.18 (30.0) 1.38 (35.0) I = k CV k = 4.0 at +25 °C I in μA, C in μF, V in Volts Typical ESL (nH) 8.0 10.0 12.0 DC leakage current ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz) DIMENSIONS in inches (millimeters) DIAMETER LENGTH L ± 0.079 (2.0) CASE CODE D + 0.039/- 0 (+ 1.0/- 0) L ± 0.079 (2.0) 1.00 (25.0) KD 1.18 (30.0) 1.57 (40.0) 1.00 (25.0) 1.18 (30.0) KE 1.18 (30.0) 2.00 (50.0) JC 1.00 (25.0) 1.38 (35.0) MB 1.38 (35.0) 1.18 (30.0) JD 1.00 (25.0) 1.57 (40.0) MC 1.38 (35.0) 1.38 (35.0) CASE CODE DIAMETER LENGTH D + 0.039/- 0 (+ 1.0/- 0) JA 1.00 (25.0) JB JE 1.00 (25.0) 2.00 (50.0) MD 1.38 (35.0) 1.57 (40.0) KA 1.18 (30.0) 1.00 (25.0) ME 1.38 (35.0) 2.00 (50.0) KB 1.18 (30.0) 1.18 (30.0) MF 1.38 (35.0) 2.50 (63.0) KC 1.18 (30.0) 1.38 (35.0) MG 1.38 (35.0) 3.18 (80.0) Revision: 07-Nov-13 Document Number: 42060 1 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 80D www.vishay.com Vishay Sprague DIMENSIONAL AND AVAILABLE FORMS 0.394 [10.0] STYLE D 2 Holes 0.079 [2.0] Dia. 0.250 [6.3] 0.394 [10.0] PVC Sleeve Insulating Disc ORDERING EXAMPLE Electrolytic capacitor 80D series: 80D122P200ME2DE3 DESCRIPTION CODE EXPLANATION 80D Product type 122 Capacitance value (1200 μF) P Tolerance (P = -10 %/+30 %) 200 Voltage rating at 85 °C (200 V) ME Can size (see dimensions table) 2 PVC insulating sleeve D Terminal style (D = 2 pin snap-in) E3 RoHS compliant ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR (m) MAX. RIPPLE AT +85 °C (A) 120 Hz 10 kHz TO 40 kHz 120 Hz 10 kHz TO 40 kHz 16 WVDC AT +85 °C, SURGE = 20 V 8200.0 80D822P016JB2DE3 0.984 x 1.18 (25.0 x 30.0) 73.0 65.0 3.3 3.6 8200.0 80D822P016KA2DE3 1.18 x 0.984 (30.0 x 25.0) 91.0 84.0 2.8 3.0 10 000.0 80D103P016JC2DE3 0.984 x 1.38 (25.0 x 35.0) 59.0 53.0 3.9 4.2 15 000.0 80D153P016JE2DE3 0.984 x 1.97 (25.0 x 50.0) 37.0 33.0 5.6 6.0 22 000.0 80D223P016KE2DE3 1.18 x 1.97 (30.0 x 50.0) 35.0 32.0 5.8 6.1 33 000.0 80D333P016ME2DE3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.4 10.0 25 WVDC AT +85 °C, SURGE = 30 V 4700.0 80D472P025JB2DE3 0.984 x 1.18 (25.0 x 30.0) 76.0 65.0 3.2 3.6 6800.0 80D682P025KB2DE3 1.18 x 1.18 (30.0 x 30.0) 71.0 63.0 3.4 3.6 10 000.0 80D103P025JE2DE3 0.984 x 1.97 (25.0 x 50.0) 39.0 33.0 5.4 6.0 10 000.0 80D103P025MB2DE3 1.38 x 1.18 (35.0 x 30.0) 38.0 33.0 5.5 6.2 15 000.0 80D153P025KE2DE3 1.18 x 1.97 (30.0 x 50.0) 36.0 32.0 5.7 6.1 22 000.0 80D223P025ME2DE3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.1 10.0 Revision: 07-Nov-13 Document Number: 42060 2 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 80D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE DxL MAX. ESR (m) MAX. RIPPLE AT +85 °C (A) 120 Hz 10 kHz TO 40 kHz 120 Hz 10 kHz TO 40 kHz 35 WVDC AT +85 °C, SURGE = 44 V 6800.0 80D682P035KC2DE3 1.18 x 1.38 (30.0 x 35.0) 60.0 51.0 3.8 4.2 10 000.0 80D103P035MC2DE3 1.38 x 1.38 (35.0 x 35.0) 33.0 27.0 6.2 7.2 12 000.0 80D123P035KE2DE3 1.18 x 1.97 (30.0 x 50.0) 33.0 27.0 6.2 7.2 15 000.0 80D153P035ME2DE3 1.38 x 1.97 (35.0 x 50.0) 20.0 17.0 8.8 10.0 50 WVDC AT +85 °C, SURGE = 63 V 3300.0 80D332P050JD2DE3 0.984 x 1.57 (25.0 x 40.0) 57.0 42.0 3.9 4.9 3300.0 80D332P050KB2DE3 1.18 x 1.18 (30.0 x 30.0) 79.0 63.0 3.1 3.6 4700.0 80D472P050KD2DE3 1.18 x 1.57 (30.0 x 40.0) 51.0 41.0 4.3 4.9 6800.0 80D682P050KE2DE3 1.18 x 1.97 (30.0 x 50.0) 40.0 32.0 5.3 6.1 55.0 2.8 3.8 63 WVDC AT +85 °C, SURGE = 79 V 1500.0 80D152P063JB2DE3 0.984 x 1.18 (25.0 x 30.0) 82.0 2200.0 80D222P063KB2DE3 1.18 x 1.18 (30.0 x 30.0) 72.0 54.0 3.2 3.9 3300.0 80D332P063MB2DE3 1.38 x 1.18 (35.0 x 30.0) 40.0 28.0 5.0 6.6 4700.0 80D472P063KE2DE3 1.18 x 1.97 (30.0 x 50.0) 36.0 28.0 5.4 6.4 6800.0 80D682P063ME2DE3 1.38 x 1.97 (35.0 x 50.0) 21.0 15.0 8.3 10.0 680.0 80D681P100JB2DE3 0.984 x 1.18 (25.0 x 30.0) 139.0 85.0 2.2 3.5 1000.0 80D102P100KB2DE3 1.18 x 1.18 (30.0 x 30.0) 111.0 74.0 2.7 3.7 1500.0 80D152P100JE2DE3 0.984 x 1.97 (25.0 x 50.0) 68.0 42.0 3.9 5.9 100 WVDC AT +85 °C, SURGE = 125 V 2200.0 80D222P100KE2DE3 1.18 x 1.97 (30.0 x 50.0) 55.0 37.0 4.7 6.2 3300.0 80D332P100ME2DE3 1.38 x 1.97 (35.0 x 50.0) 50.0 37.0 5.2 6.2 150.0 80D151P200JA2DE3 0.984 x 0.984 (25.0 x 25.0) 660.0 375.0 1.3 3.2 220.0 80D221P200KA2DE3 1.18 x 0.984 (30.0 x 25.0) 460.0 272.0 1.7 3.6 330.0 80D331P200KC2DE3 1.18 x 1.38 (30.0 x 35.0) 278.0 165.0 2.4 4.9 470.0 80D471P200KD2DE3 1.18 x 1.57 (30.0 x 40.0) 220.0 131.0 2.8 5.7 680.0 80D681P200KD2DE3 1.18 x 1.57 (30.0 x 40.0) 248.0 127.0 2.1 4.7 200 WVDC AT +85 °C, SURGE = 250 V 820.0 80D821P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 130.0 82.0 4.3 7.4 1000.0 80D102P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 144.0 81.0 3.4 6.6 1200.0 80D122P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 141.0 75.0 3.4 6.6 3.2 250 WVDC AT +85 °C, SURGE = 300 V 100.0 80D101P250JA2DE3 0.984 x 0.984 (25.0 x 25.0) 720.0 377.0 1.1 150.0 80D151P250JB2DE3 0.984 x 1.18 (25.0 x 30.0) 541.0 284.0 1.4 3.8 220.0 80D221P250JD2DE3 0.984 x 1.57 (25.0 x 40.0) 343.0 182.0 2.0 5.2 330.0 80D331P250JE2DE3 0.984 x 1.97 (25.0 x 50.0) 263.0 140.0 2.5 6.3 470.0 80D471P250KE2DE3 1.18 x 1.97 (30.0 x 50.0) 185.0 101.0 3.2 7.0 680.0 80D681P250ME2DE3 1.38 x 1.97 (35.0 x 50.0) 191.0 81.0 4.0 7.4 Revision: 07-Nov-13 Document Number: 42060 3 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000