8EWF04STRR

I2124 rev. B 10/99 QUIETIR Series 8EWF..S SURFACE MOUNTABLE FAST SOFT RECOVERY DIODE VF < 1.2V @ 8A trr = 55ns VRRM 200 to 600V Description/Features The 8EWF..S fast soft recovery QUIET IR rectifier series has been optimized for combined short reverse recovery time, low forward voltage drop and low leakage current The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: Output rectification and freewheeling diode in inverters, choppers and converters. Input rectifications where severe restrictions on conducted EMI should be met. Major Ratings and Characteristics Characteristics Package Outline 8EWF..S Units 8 A VRRM 200 to 600 V IFSM 170 A IF(AV) Sinusoidal waveform VF @ 8 A, TJ = 25°C 1.2 V trr @ 1A, 100A/µs 55 ns - 40 to 150 °C TJ Document Number: 93160 TO-252AA (D-Pak) www.vishay.com 1 QUIET 8EWF..S IR Series I2124 rev. B 10/99 Voltage Ratings VRRM, maximum peak reverse voltage VRSM , maximum non repetitive peak reverse voltage IRRM 150°C V V mA 8EWF02S 200 300 3 8EWF04S 400 500 8EWF06S 600 700 Part Number Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM 2 I t 8EWF..S Units 8 A Max. Peak One Cycle Non-Repetitive 170 Surge Current 200 2 140 Max. I t for fusing A I √t Max. I √t for fusing 2 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2 s 200 2 Conditions @ TC = 96° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2000 A √s 2 t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 8EWF..S Units VFM Max. Forward Voltage Drop 1.2 V rt 16 mΩ VF(TO) Threshold voltage 1.13 V IRM 0.1 Forward slope resistance Max. Reverse Leakage Current mA 3 Conditions @ 8A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Typical Reverse Recovery Characteristics Parameters 8EWF..S Units Conditions trr Reverse Recovery Time 140 ns I F @ 8Apk Irr Reverse Recovery Current 2.6 A @ 25A/µs Qrr Reverse Recovery Charge 0.25 µC @ T J = 25°C S Snap Factor 0.5 - tb/ta Document Number: 93160 IFM trr ta tb t di dt Qrr Irr www.vishay.com 2 QUIET 8EWF..S IR Series I2124 rev. B 10/99 Thermal-Mechanical Specifications Parameters 8EWF..S Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C 240 °C 2.5 °C/W 50 °C/W 1(0.03) g (oz.) Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction Conditions for 10 seconds DCoperation to Ambient (PCB Mount)** wt Approximate Weight Case Style TO-252AA (D-Pak) 8EWF..S Series R thJC (DC) = 2.5 °C/W 140 130 120 Conduction Angle 110 100 90 30° 80 60° 90° 120° 180° 70 60 0 1 2 3 4 5 6 7 8 9 150 8EWF..S Series R thJC (DC) = 2.5 °C/W 140 130 120 110 Conduction Period 100 30° 60° 90 90° 120° 180° 80 DC 70 0 2 4 6 8 10 12 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 12 180° 120° 90° 60° 30° 10 8 RMS Limit 6 4 Conduction Angle 2 8EWF..S Series T J = 150°C 0 0 Maximum Allowable Case Temperature (°C) 150 1 2 3 4 5 6 7 8 9 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Document Number: 93160 Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 14 16 DC 180° 120° 90° 60° 30° 14 12 10 8 RMS Limit 6 Conduction Period 4 8EWF..S Series T J = 150°C 2 0 0 2 4 6 8 10 12 14 Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics www.vishay.com 3 QUIET 8EWF..S IR Series 200 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 175 150 125 100 75 8EWF..S Series 50 1 10 200 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) I2124 rev. B 10/99 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150°C No Voltage Reapplied Rated VRRM Reapplied 180 160 140 120 100 80 8EWF..S Series 60 40 0.01 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0.1 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 100 10 T J= 25°C T J= 150°C 8EWF..S Series 1 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) 0.4 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics 8EWF..S Series T J = 25 °C 0.3 I FM = 20 A 0.2 10 A 8A 5A 0.1 2A 1A 0 0 40 80 120 160 200 0.4 8EWF..S Series T J = 150 °C 0.3 I FM = 20 A 0.2 10 A 8A 5A 0.1 2A 1A 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C Fig. 9 - Recovery Time Characteristics, TJ = 150°C Document Number: 93160 www.vishay.com 4 QUIET 8EWF..S IR Series 1.4 8EWF..S Series T J = 25 °C 1.2 I FM = 20 A 1 10 A 0.8 8A 0.6 5A 0.4 2A 1A 0.2 0 0 40 80 120 160 200 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) I2124 rev. B 10/99 2.4 2 1.8 8EWF..S Series T J = 25 °C 14 I FM = 20 A 10 A 12 8A 10 5A 8 2A 6 1A 4 2 0 0 40 80 120 160 200 1.2 Transient Thermal Impedance Z thJC (°C/W) 5A 1 0.8 2A 0.6 0.4 1A 0.2 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 11 - Recovery Charge Characteristics, TJ = 150°C 20 I FM = 20 A 8EWF..S Series T J = 150 °C 18 16 10 A 14 8A 12 5A 10 2A 8 1A 6 4 2 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C 8A 1.4 Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) 16 10 A 1.6 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C I FM = 20 A 8EWF..S Series T J = 150 °C 2.2 Fig. 13 - Recovery Current Characteristics, T J = 150°C 10 Steady State Value (DC Operation) 1 D D D D D = = = = = 0.50 0.33 0.25 0.17 0.08 Single Pulse 8EWF..S Series 0.1 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Document Number: 93160 www.vishay.com 5 QUIET 8EWF..S IR Series I2124 rev. B 10/99 Ordering Information Table Device Code 8 E W F 06 S BASE CATHODE TRL 4 1 1 2 3 -4 5 2 3 4 5 6 7 Circuit Voltage Package: Type Current ofConfiguration: Rating Silicon: code: Code x 100 = V 1 E ==Single W F Fast D-Pak Soft Diode Recovery Rectifier 2 3 ANODE CATHODE ANODE 02 = 200V RRM -6 7 04 = 400V 06 = 600V S Tape = Surface and Reel Mountable Option: TRL = Left Orientation Reel TRR = Right Orientation Reel Outline Table 2.38 (0.09) 2.19 (0.08) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02) 1.27 (0.05) 0.88 (0.03) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 4 6.45 (0.24) 5.68 (0.22) 6.22 (0.24) 1.64 (0.02) 6.48 (0.26) 10.42 (0.41) 5.97 (0.23) 10.67 (0.42) 9.40 (0.37) 1 2 3 0.51 (0.02) MIN. 1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 3x 0.89 (0.03) 0.64 (0.02) 2.28 (0.09) 2x 4.57 (0.18) 2x 2.54 (0.10) 0.58 (0.02) 1.65 (0.06) 0.46 ( 0.02) 2x 2.28 (0.09) 2x 1 - Anode 2 - Cathode 3 - Anode 4 - Cathode Dimensions in millimeters and (inches) Document Number: 93160 www.vishay.com 6 QUIET 8EWF..S IR Series I2124 rev. B 10/99 Marking Information EXAMPLE: THIS IS AN 8EWF06S 4 (K) INTERNATIONAL PART NUMBER RECTIFIER LOGO 8EWF06S 9712 5K3A ASSEMBLY 2 (K) LOT CODE 1 (A) 3 (A) DATE CODE (YYWW) YY = YEAR WW = WEEK Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. Document Number: 93160 50 (1.97) DIA. When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. www.vishay.com 7 QUIET 8EWF..S IR Series I2124 rev. B 10/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Data and specifications subject to change without notice. Document Number: 93160 www.vishay.com 8 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN® are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1