AH15047R00JE66

AH www.vishay.com Vishay Huntington Wirewound Resistors, Commercial Power, Aluminum Housed, Chassis Mount FEATURES • High volume product suitable for commercial applications • Molded construction for total environmental protection • Complete welded construction • Available in non-inductive styles (special “NI”) with Ayrton-Perry winding for lowest reactive components • Mounts on chassis to utilize heat-sink effect • For industrial applications, please see RH/NH datasheet: www.vishay.com/doc?30201 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE  RESISTANCE RANGE (-NI)  ± 5 %; ± 10 % ± 5 %; ± 10 % 45 0.1 to 50K 5 to 100 80 100 50 0.1 to 100K 5 to 200 110 AH150 150 55 0.1 to 100K 5 to 500 166 AH200 200 50 0.1 to 50K 5 to 500 435 AH250 250 60 0.1 to 65K 5 to 500 500 AH300 300 75 0.1 to 80K 5 to 500 615 POWER RATING WITH STANDARD HEATSINK P25 °C W POWER RATING WITHOUT STANDARD HEATSINK P25 °C W AH075 75 AH100 GLOBAL MODEL WEIGHT (typical) g TECHNICAL SPECIFICATIONS PARAMETER UNIT AH RESISTOR CHARACTERISTICS ppm/°C Typical values: ± 100 std. for 1  to 1 k; 25 std. for > 1 k Insulation Resistance  > 10 000 M Operating Temperature Range °C -25 to +250 Temperature Coefficient GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: AH0754R125JE66 A H 0 GLOBAL MODEL AH075 (see Standard Electrical Specifications Global Model column for options) Revision: 30-Aug-2021 7 5 4 R 1 2 RESISTANCE VALUE TOLERANCE CODE R = decimal K = thousand 1R500 = 1.5  1K500 = 1.5 k J = 5.0 % K = 10.0 % 5 J E 6 6 PACKAGING SPECIAL E66 = lead (Pb)-free, cardboard separator pack NI = non-inductive (dash number) from 1 to 999 as applicable Document Number: 31883 1 For technical questions, contact: ww2dresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AH www.vishay.com Vishay Huntington DIMENSIONS in inches [millimeters] F C F E C C E D A B H F E D A B H G I D H G AH075 to AH100 D A B I G I AH200 to AH300 AH150 DIMENSIONS in inches [millimeters] GLOBAL MODEL A MAX. B MAX. C MAX. AH075 1.97 [50] 2.8 [71] 1.89 [48] 1.14 [29] 1.46 [37] AH100 2.6 [66] 3.54 [90] 1.89 [48] 1.38 [35] 1.46 [37] D E F ± 0.012 [0.3] ± 0.012 [0.3] ± 0.012 [0.3] G MAX. H MAX. I MAX. 0.17 [4.4] 0.46 [11.8] 1.02 [26] 0.16 [4.0] 0.17 [4.4] 0.46 [11.8] 1.02 [26] 0.16 [4.0] AH150 3.86 [98] 4.92 [125] 1.89 [48] 2.28 [58] 1.46 [37] 0.17 [4.4] 0.46 [11.8] 1.02 [26] 0.16 [4.0] AH200 3.54 [90] 5.71 [145] 2.87 [73] 1.38 [35] 2.25 [57.2] 0.21 [5.3] 0.81 [20.5] 1.77 [45] 0.22 [5.5] AH250 4.33 [110] 6.5 [165] 2.87 [73] 1.75 [44.5] 2.25 [57.2] 0.21 [5.3] 0.81 [20.5] 1.77 [45] 0.22 [5.5] AH300 5.12 [130] 7.09 [180] 2.87 [73] 2.05 [52] 2.25 [57.2] 0.26 [6.6] 0.81 [20.5] 1.77 [45] 0.22 [5.5] LIMITING ELEMENT VOLTAGE (DC/ACRMS) DIELECTRIC STRENGTH (ACPK) AH075 1400 AH100 AH150 GLOBAL MODEL STANDARD HEATSINK (1) AREA (cm2) THICKNESS (mm) TERMINAL TYPE 5000 1000 3 Lugged 1900 5000 1000 3 Lugged 2500 5000 1000 3 Lugged AH200 1900 5000 3750 3 Threaded AH250 2200 5000 4800 3 Threaded AH300 2500 5000 5800 3 Threaded Note (1) It is recommended that a heatsink compound be applied between the resistor and heatsink surface DERATING 300 300 W 250 200 W 200 150 W 150 100 120 100 80 60 40 75 W 50 0 RATED POWER IN % WATTAGE (W) TEMPERATURE VS. POWER 0 25 50 75 100 125 20 150 175 200 TEMPERATURE (°C) 0 -25 0 25 50 75 100 125 150 200 250 AMBIENT TEMPERATURE IN °C Note • Typical at 25°C Revision: 30-Aug-2021 Document Number: 31883 2 For technical questions, contact: ww2dresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000