BA479G-TAP

BA479G, BA479S www.vishay.com Vishay Semiconductors RF PIN Diodes - Single in DO-35 (DO-204AH) FEATURES • Wide frequency range 10 MHz to 1 GHz • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Current controlled HF resistance in adjustable attenuators MECHANICAL DATA LINKS TO ADDITIONAL RESOURCES Case: DO-35 (DO-204AH) 3D 3D Weight: approx. 125 mg 3D Models Cathode band color: black Packaging codes/options: TR/10K per 13" reel (52 mm tape), 50K/box TAP/10K per ammopack (52 mm tape), 50K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING CIRCUIT CONFIGURATION REMARKS BA479G VR = 30 V, zr > 5 kΩ BA479G-TR or BA479G-TAP BA479G Single Tape and reel/ammopack BA479S VR = 30 V, zr > 9 kΩ BA479S-TR or BA479S-TAP BA479S Single Tape and reel/ammopack ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PART SYMBOL VALUE Reverse voltage TEST CONDITION VR 30 UNIT V Forward continuous current IF 50 mA THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air TEST CONDITION SYMBOL VALUE UNIT l = 4 mm, TL = constant RthJA 350 K/W Tj 125 °C Tstg -55 to +150 °C Junction temperature Storage temperature range ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 20 mA VF 1 V Reverse current VR = 30 V IR 0.05 μA f = 100 MHz, VR = 0 V CD 0.5 pF f = 100 MHz, IF = 1.5 mA rf 50 Diode capacitance Differential forward resistance Reverse impedance f = 100 MHz, VR = 0 V Minority carrier lifetime IF = 10 mA, IR = 10 mA BA479G zr 5 BA479S zr 9 τ Ω kΩ kΩ 4 μs Rev. 2.0, 07-Mar-2022 Document Number: 85527 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BA479G, BA479S www.vishay.com Vishay Semiconductors a - Typical Cross Modulation Distortion (dB) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) IF - Forward Current (mA) 100 10 Tamb = 25 °C 1 Scattering Limit 0.1 0.01 0 0.4 95 9735 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) Π - Circuit with 10 dB Attenuation V 0 = 40 dBmV 0 f 1 = 100 MHz unmodulated - 20 - 40 - 60 - 80 95 9733 Fig. 1 - Forward Current vs. Forward Voltage rf - Differential Forward Resistance (Ω) 20 0 20 40 60 80 f 2 , modulated with 200 kHz, m = 100 % (MHz) Fig. 3 - Typ. Cross Modulation Distortion vs. Frequency f2 10 000 1000 100 f > 20 MHz Tj = 25 °C 10 1 0.001 0.01 0.1 1 10 IF - Forward Current (mA) 95 9734 Fig. 2 - Differential Forward Resistance vs. Forward Current PACKAGE DIMENSIONS in millimeters (inches): DO-35 (DO-204AH) 3.9 max. [0.154] 3.1 min. [0.120] 26 min. [1.024] 1.3 [0.050] 26 min. [1.024] 1.7 [0.067] Ø 0.4 min. [0.015] Ø 0.6 max. [0.024] Cathode Identification Rev. 6 - Date: 19. December 2011 Document no.: SB-V-3906.04-031(4) 94 9366 Rev. 2.0, 07-Mar-2022 Document Number: 85527 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000