BA682-GS08

BA682, BA683 www.vishay.com Vishay Semiconductors Band Switching Diodes FEATURES • Silicon planar diodes • Low dynamic forward resistance • Low diode capacitance • High reverse impedance • AEC-Q101 qualified 94 9371 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: MiniMELF SOD-80 APPLICATIONS Weight: approx. 31 mg • Band switching in VHF-tuners  Cathode band color: black Packaging codes/options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE REMARKS BA682 VR = 35 V, rf at IF 3 mA = max. 0.7  BA682-GS18 or BA682-GS08 Tape and reel BA683 VR = 35 V, rf at IF 3 mA = max. 1.2  BA683-GS18 or BA683-GS08 Tape and reel ABSOLUTE MAXIMUM RATINGS (1) SYMBOL VALUE Reverse voltage VR 35 V Forward continuous current IF 100 mA PARAMETER TEST CONDITIONS UNIT Note (1) T amb = 25 °C, unless otherwise specified THERMAL CHARACTERISTICS (1) TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W Tj 150 °C Tstg - 55 to + 150 °C PARAMETER Junction to ambient air Junction temperature Storage temperature range Note Tamb = 25 °C, unless otherwise specified (1) ELECTRICAL CHARACTERISTICS (1) MAX. UNIT Forward voltage IF = 100 mA VF 1000 mV Reverse current VR = 20 V IR 50 nA f = 100 MHz, VR = 1 V CD1 1.5 pF BA682 CD2 1.25 pF PARAMETER Diode capacitance TEST CONDITION f = 100 MHz, VR = 3 V f = 200 MHz, IF = 3 mA Dynamic forward resistance f = 200 MHz, IF = 10 mA PART SYMBOL MIN. TYP. BA683 CD2 1.2 pF BA682 rf1 0.7  BA683 rf1 1.2  BA682 rf2 0.5  BA683 rf2 0.9  Note (1) T amb = 25 °C, unless otherwise specified Rev. 1.6, 04-Mar-13 Document Number: 85530 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BA682, BA683 www.vishay.com Vishay Semiconductors 100 3.0 f = 200 MHz Tj = 25 °C CD - Diode Capacitance (pF) rf - Differential Forward Resistance (Ω) TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 10 BA683 1 BA682 f = 200 MHz Tj = 25 °C 2.5 2.0 1.5 BA682 1.0 BA683 0.5 0.1 0 0.1 1 10 IF - Forward Current (mA) 94 9074 0.1 100 94 9075 1 10 100 VR - Reverse Voltage (V) Fig. 1 - Diode Capacitance vs. Reverse Voltage Fig. 1 - Dynamic Forward Resistance vs. Forward Current PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.6, 04-Mar-13 Document Number: 85530 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000