BAQ35-GS18

BAQ33, BAQ34, BAQ35 www.vishay.com Vishay Semiconductors Small Signal Switching Diodes, Low Leakage Current FEATURES • Silicon planar diodes • Very low reverse current • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Protection circuits, time delay circuits, peak follower circuits, logarithmic amplifiers DESIGN SUPPORT TOOLS click logo to get started Models Available MECHANICAL DATA Case: MiniMELF (SOD-80) Weight: approx. 31 mg Cathode band color: black Packaging codes / options: GS18/10K per 13" reel (8 mm tape), 10K/box GS18/10K per 13" reel (8 mm tape), 10K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING CIRCUIT CONFIGURATION REMARKS BAQ33 VRRM = 40 V BAQ33-GS18 or BAQ33-GS08 - Single Tape and reel BAQ34 VRRM = 70 V BAQ34-GS18 or BAQ34-GS08 - Single Tape and reel BAQ35 VRRM = 140 V BAQ35-GS18 or BAQ35-GS08 - Single Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Repetitive peak reverse voltage Reverse voltage Peak forward surge current PART SYMBOL VALUE UNIT BAQ33 VRRM 40 V BAQ34 VRRM 70 V BAQ35 VRRM 140 V BAQ33 VR 30 V BAQ34 VR 60 V BAQ35 VR 125 V IFSM 2 A IF 200 mA tp = 1 μs Forward continuous current THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W Tj 175 °C Tstg -65 to +175 °C Rev. 1.9, 11-Jul-17 Document Number: 85537 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAQ33, BAQ34, BAQ35 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Forward voltage PART VF E ≤ 300 Ix, rated VR IR E ≤ 300 Ix, rated VR, Tj = 125 °C Reverse current Breakdown voltage MIN. TYP. MAX. 1 V 3 nA 0.5 μA BAQ33 IR 0.5 1 nA E ≤ 300 Ix, VR = 30 V BAQ34 IR 0.5 1 nA E ≤ 300 Ix, VR = 60 V BAQ35 IR 0.5 1 nA IR = 5 μA, tp/T = 0.01, tp = 0.3 ms BAQ33 V(BR) BAQ34 BAQ35 VR = 0 V, f = 1 MHz IR UNIT 1 E ≤ 300 Ix, VR = 15 V IR = 5 μA, tp/T = 0.01, tp = 0.3 ms Diode capacitance SYMBOL IF = 100 mA 40 V V(BR) 70 V V(BR) 140 V CD 3 pF TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 000 1000 I F - Forward Current (mA) I R - Reverse Current (nA) V R = VRRM 1000 Scattering Limit 100 10 Scattering Limit 10 1 0.1 1 0 94 9079 Tj = 25 °C 100 40 80 120 160 0 200 Tj - Junction Temperature (°C) Fig. 1 - Reverse Current vs. Junction Temperature 94 9078 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Rev. 1.9, 11-Jul-17 Document Number: 85537 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAQ33, BAQ34, BAQ35 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF (SOD-80) 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.9, 11-Jul-17 Document Number: 85537 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BAQ33-GS08 BAQ33-GS18 BAQ34-GS18 BAQ35-GS08 BAQ35-GS18 BAQ34-GS08