BAS21-E3-18

BAS19, BAS20, BAS21 www.vishay.com Vishay Semiconductors Small Signal Switching Diodes, High Voltage FEATURES • Silicon epitaxial planar diode 3 • Fast switching diode in case SOT-23, especially suited for automatic insertion. • AEC-Q101 qualified available 1 2 • Base P/N-E3 - RoHS-compliant, commercial grade • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESIGN SUPPORT TOOLS click logo to get started Models Available MECHANICAL DATA Case: SOT-23 Weight: approx. 8.8 mg Packaging codes / options: 18/10K per 13” reel (8 mm tape), 10K/box 08/3K per 7” reel (8 mm tape), 15K/box PARTS TABLE PART TYPE DIFFERENTIATION BAS19 VR = 100 V BAS20 VR = 150 V BAS21 VR = 200 V ORDERING CODE BAS19-E3-08 or BAS19-E3-18 BAS19-HE3-08 or BAS19-HE3-18 BAS20-E3-08 or BAS20-E3-18 BAS20-HE3-08 or BAS20-HE3-18 BAS21-E3-08 or BAS21-E3-18 BAS21-HE3-08 or BAS21-HE3-18 TYPE MARKING CIRCUIT CONFIGURATION REMARKS A8 Single Tape and reel A81 Single Tape and reel A82 Single Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VR VR VR VRRM VRRM VRRM VALUE 100 150 200 120 200 250 UNIT V V V V V V t = 1 μs IFSM 2.5 A t=1s IFSM 0.5 A (av. over any 20 ms period) IF(AV) 200 mA IF IFRM Ptot 200 625 250 mA mA mW Continuous reverse voltage Repetitive peak reverse voltage Non repetitive peak forward  current Non repetitive peak forward  surge current Maximum average forward  rectified current (1) DC forward current (2) Repetitive peak forward current Power dissipation (2) PART BAS19 BAS20 BAS21 BAS19 BAS20 BAS21 Notes (1) Measured under pulse conditions; pulse time = t  0.3 ms p (2) Device on fiberglass substrate, see layout on next page Rev. 1.2, 13-Feb-18 Document Number: 85540 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19, BAS20, BAS21 www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air Junction temperature SYMBOL VALUE UNIT RthJA (1) 430 °C Tj 150 °C Storage temperature range Tstg -65 to +150 °C Operating temperature range Top -55 to +150 °C Note (1) Device on fiberglass substrate, see layout drawing below ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Forward voltage PART SYMBOL UNIT VF MIN. TYP. 1.0 V IF = 200 mA VF 1.25 V VR = 100 V BAS19 IR 100 nA VR = 150 V BAS20 IR 100 nA VR = 200 V BAS21 IR 100 nA VR = VRmax., Tj = 150 °C IR 100 μA IF = 10 mA rf VR = 0, f = 1 MHz CD 5 pF IF = IR = 30 mA, RL = 100 , iR = 3 mA trr 50 ns Leakage current Dynamic forward resistance Diode capacitance Reverse recovery time MAX. IF = 100 mA  5 LAYOUT FOR RthJA TEST Thickness: Fiberglass 1.5 mm (0.059 inches) Copper leads 0.3 mm (0.012 inches) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Rev. 1.2, 13-Feb-18 Document Number: 85540 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19, BAS20, BAS21 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Rev. 1.2, 13-Feb-18 Document Number: 85540 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000