BAS21-G3-18

BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors Small Signal Switching Diodes, High Voltage FEATURES • Silicon epitaxial planar diode 3 • Fast switching diode in case SOT-23, especially suited for automatic insertion • General purpose switching applications • High conductance 1 2 • AEC-Q101 qualified available (part number on request) • Base P/N-G3 - green, commercial grade DESIGN SUPPORT TOOLS click logo to get started • Material categorization: for definitions of compliance www.vishay.com/doc?99912 please see Models Available MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes / options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING CIRCUIT CONFIGURATION REMARKS BAS19-G VR = 100 V BAS19-G3-08 or BAS19-G3-18 A8G Single Tape and reel BAS20-G VR = 150 V BAS20-G3-08 or BAS20-G3-18 A9G Single Tape and reel BAS21-G VR = 200 V BAS21-G3-08 or BAS21-G3-18 AAG Single Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Continuous reverse voltage Repetitive peak reverse voltage Non-repetitive peak forward current t = 1 μs Non-repetitive peak forward surge current t=1s Maximum average forward rectified current (1) (av. over any 20 ms period) PART SYMBOL VALUE UNIT BAS19-G VR 100 V BAS20-G VR 150 V BAS21-G VR 200 V BAS19-G VRRM 120 V BAS20-G VRRM 200 V BAS21-G VRRM 250 V IFSM 2.5 0.5 A IF(AV) 200 mA IF 200 mA Repetitive peak forward current IFRM 625 mA Power dissipation (2) Ptot 250 mW DC forward current (2) Notes (1) Measured under pulse conditions; pulse time = t  0.3 ms p (2) Device on fiberglass substrate, see layout on next page Rev. 1.3, 13-Feb-18 Document Number: 83390 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) SYMBOL VALUE UNIT RthJA 430 K/W Junction temperature Tj 150 °C Storage temperature range Tstg -65 to +150 °C Operating temperature range Top -55 to +150 °C Note (1) Device on fiberglass substrate, see layout drawing below ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Forward voltage Leakage current PART SYMBOL UNIT VF MIN. TYP. 1.0 V IF = 200 mA VF 1.25 V VR = 100 V BAS19-G IR 100 nA VR = 150 V BAS20-G IR 100 nA VR = 200 V BAS21-G IR 100 nA VR = VRmax., TJ = 150 °C IR 100 μA IF = 10 mA rf VR = 0, f = 1 MHz CD 5 pF IF = IR = 30 mA, RL = 100 , iR = 3 mA trr 50 ns Dynamic forward resistance Diode capacitance Reverse recovery time MAX. IF = 100 mA  5 LAYOUT FOR RthJA TEST Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Rev. 1.3, 13-Feb-18 Document Number: 83390 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS19-G, BAS20-G, BAS21-G www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) 0° t o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.5 (0.020) 0.45 (0.018) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Rev. 1.3, 13-Feb-18 Document Number: 83390 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000