BAT42WS-G3-08

BAT42WS-G, BAT43WS-G www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • These diodes feature very low turn-on voltage and fast switching. These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • For general purpose applications • AEC-Q101 qualified available (part number on request) DESIGN SUPPORT TOOLS click logo to get started • Base P/N-G3 - green, commercial grade • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Models Available MECHANICAL DATA Case: SOD-323 Weight: approx. 4.0 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART CIRCUIT CONFIGURATION TYPE MARKING BAT42WS-G BAT42WS-G3-08 or BAT42WS-G3-18 ORDERING CODE Single LC BAT43WS-G BAT43WS-G3-08 or BAT43WS-G3-18 Single LD REMARKS Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE VRRM 30 V IF 200 mA tp < 1 s, δ < 0.5 IFRM 500 mA tp < 10 ms IFSM 4 A Ptot 150 mW SYMBOL VALUE UNIT RthJA 650 K/W Tj 125 °C Operating temperature range Top -55 to +125 °C Storage temperature range Tstg -55 to +150 °C Repetitive peak reverse voltage Forward continuous current (1) Repetitive peak forward current Surge forward current (1) (1) Power dissipation (1) UNIT Note (1) Valid provided that electrodes are kept at ambient temperature THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air TEST CONDITION (1) Junction temperature Note (1) Valid provided that electrodes are kept at ambient temperature Rev. 1.3, 02-Jun-17 Document Number: 85238 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT42WS-G, BAT43WS-G www.vishay.com ELECTRICAL CHARACTERISTICS Vishay Semiconductors (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reverse breakdown voltage IR = 100 μA (pulsed) V(BR) 30 VR = 25 V IR Leakage current (1) Reverse recovery time MAX. UNIT 0.5 μA V IR 100 μA IF = 200 mA VF 1000 mV VF 400 mV 650 mV voltage (1) Diode capacitance TYP. VR = 25 V, Tj = 100 °C IF = 10 mA Forward PART BAT42WS-G IF = 50 mA BAT42WS-G VF IF = 2 mA BAT43WS-G VF IF = 15 mA BAT43WS-G VF VR = 1 V, f = 1 MHz CD IF = 10 mA, IR = 100 mA, iR = 1 mA, RL = 100 Ω trr 260 330 mV 450 mV 7 pF 5 ns Note (1) Pulse test; t ≤ 300 μs, t /T < 0.02 p p 250 1000 IR - Reverse Leackage Current (µA) Ptot - Admissible Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 200 150 100 50 0 0 50 100 50 °C 1 25 °C 0.1 0.01 0 10 20 30 40 VR - Reverse Voltage (V) 50 Fig. 3 - Typical Reverse Characteristics 1000 14 100 125 °C - 40 °C 10 25 °C 1 0.1 CD - Diode Capacitance (pF) I F - Forward Current (mA) 75 °C 18444 Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature 12 10 8 6 4 2 0 0.01 0 18443 100 °C 10 150 Tamb - Ambient Temperature (°C) 20981 125 °C 100 200 400 600 800 1000 1200 VF - Instantaneous Forward Voltage (mV) Fig. 2 - Typical Forward Characteristics 0 18445 5 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 4 - Typical Capacitance vs. Reverse Voltage Rev. 1.3, 02-Jun-17 Document Number: 85238 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT42WS-G, BAT43WS-G www.vishay.com Vishay Semiconductors 0.1 [0.004] max. 0.15 [0.006] 0.10 [0.004] 0.2 [0.008] 0.8 [0.031] 1.15 [0.045] PACKAGE DIMENSIONS in millimeters (inches): SOD-323 0° - 8° 0.40 [0.016] 0.25 [0.010] 1.95 [0.077] 2.50 [0.098] 1.1 [0.043] 0.20 [0.008] 0.40 [0.016] 2.85 [0.112] 1.5 [0.059] 1.60 [0.063] Cathode bar Footprint recommendation: 1.6 [0.063] Document no.: S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 6 - Date: 23.Sept.2016 17443 0.8 [0.031] 0.6 [0.024] 0.8 [0.031] Rev. 1.3, 02-Jun-17 Document Number: 85238 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000