BAT46-TAP

BAT46 www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • For general purpose applications • This diode features very low turn-on voltage and fast switching. This device is protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • This diode is also available in the SOD-123 case with type designation BAT46W-V and in the MiniMELF case with type designations LL46 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models MECHANICAL DATA Case: DO-35 (DO-204AH) Weight: approx. 125 mg Cathode band color: Black Packaging codes/options: TR/10K per 13" reel (52 mm tape), 50K/box TAP/10K per ammopack (52 mm tape), 50K/box PARTS TABLE PART ORDERING CODE CIRCUIT CONFIGURATION TYPE MARKING REMARKS BAT46 BAT46-TR or BAT46-TAP Single BAT46 Tape and reel/ammopack ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Repetitive peak reverse voltage VRRM 100 V Forward continuous current (1) IF 150 mA tp < 1 s, δ < 0.5 IFRM 350 mA tp < 10 ms IFSM 750 mA Tamb = 80 °C Ptot 150 mW Repetitive peak forward current (1) Surge forward current (1) Power dissipation (1) TEST CONDITION UNIT Note (1) Valid provided that electrodes are kept at ambient temperature THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature TEST CONDITION SYMBOL VALUE UNIT Valid provided that electrodes are kept at ambient temperature RthJA 300 K/W Tj 125 °C Ambient operating temperature range Tamb -65 to +125 °C Storage temperature range Tstg -65 to +150 °C Rev. 2.0, 16-Nov-2021 Document Number: 85662 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT46 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reverse breakdown voltage IR = 100 μA (pulsed) V(BR) 100 VR = 1.5 V Leakage current (1) MAX. UNIT IR 0.5 μA VR = 1.5 V, Tj = 60 °C IR 5 μA V VR = 10 V IR 0.8 μA VR = 10 V, Tj = 60 °C IR 7.5 μA VR = 50 V IR 2 μA VR = 50 V, Tj = 60 °C IR 15 μA VR = 75 V IR 5 μA VR = 75 V, Tj = 60 °C IR 20 μA IF = 0.1 mA VF 250 mV IF = 10 mA VF 450 mV 1000 mV Forward voltage (1) Diode capacitance TYP. IF = 250 mA VF VR = 0 V, f = 1 MHz CD 10 pF VR = 1 V, f = 1 MHz CD 6 pF Note (1) Pulse test; t ≤ 300 μs, , δ < 2 % p TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 250 T j = 60 °C 100 P tot - Power Dissipation (mW) I F - Forward Current (mA) 1000 10 25 °C 1 0.1 0.01 150 100 50 0 0 18546 0.2 0.4 0.6 0.8 1 VF - Forward Voltage (V) 1.2 0 20134 Fig. 1 - Typical Instantaneous Forward Characteristics IR - Reverse Leakage Current (µA) 200 25 50 75 100 125 150 175 200 T amb - Ambient Temperature (°C) Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature 100 10 T j = 60 °C 1 Tj = 25 °C 0.1 0.01 0 18547 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 2 - Typical Reverse Characteristics Rev. 2.0, 16-Nov-2021 Document Number: 85662 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAT46 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO-35 (DO-204AH) 3.9 max. [0.154] 3.1 min. [0.120] 26 min. [1.024] 1.3 [0.050] 26 min. [1.024] 1.7 [0.067] Ø 0.4 min. [0.015] Ø 0.6 max. [0.024] Cathode Identification Rev. 6 - Date: 19. December 2011 Document no.: SB-V-3906.04-031(4) 94 9366 Rev. 2.0, 16-Nov-2021 Document Number: 85662 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000