BAT54-02V
www.vishay.com
Vishay Semiconductors
Small Signal Schottky Diode
FEATURES
• This diode features very low turn-on voltage and
fast switching
2
1
• This device is protected by a PN junction guard
ring against excessive voltage, such as
electrostatic discharges
22321
• AEC-Q101 qualified available
LINKS TO ADDITIONAL RESOURCES
• Space saving SOD-523 package
3D 3D
• Base P/N-G3 - RoHS-compliant, commercial
grade
3D Models
MECHANICAL DATA
• Base P/N-HG3 - RoHS-compliant, AEC-Q101 qualified
Case: SOD-523
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Weight: approx. 1.4 mg
Molding compound flammability rating: UL 94 V-0
Terminals: high temperature soldering guaranteed:
260 °C/4 x 10 s at terminals
Packaging codes / options:
08/8K per 7" reel (8 mm tape)
PARTS TABLE
PART
BAT54-02V
ORDERING CODE
AEC-Q101 QUALIFIED
BAT54-02V-G3-08
no
BAT54-02V-HG3-08
yes
CIRCUIT CONFIGURATION TYPE MARKING
Single
:V
REMARKS
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Repetitive peak reverse voltage
= working peak reverse voltage
Forward continuous current
Repetitive peak forward current
Surge forward current
tp = 10 ms square wave, Tj = 25 °C prior to surge
Power dissipation
SYMBOL
VALUE
UNIT
VRRM
30
V
IF
200
mA
IFRM
300
mA
IFSM
600
mA
Ptot
150
mW
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
UNIT
Thermal resistance junction to ambient air
RthJA
680
K/W
Thermal resistance junction to lead
RthJL
480
K/W
Junction temperature
TEST CONDITION
Tj
125
°C
Operating temperature range
Top
-55 to +125
°C
Storage temperature range
Tstg
-55 to +150
°C
Rev. 1.8, 20-Jan-2022
Document Number: 85633
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAT54-02V
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
100 μA pulses
V(BR)
30
Pulse test tp < 300 μs,
δ < 2 % at VR = 25 V
IR
2
μA
IF = 0.1mA, tp < 300 μs, δ < 2 %
VF
240
mV
IF = 1 mA, tp < 300 μs, δ < 2 %
VF
320
mV
IF = 10 mA, tp < 300 μs, δ < 2 %
VF
400
mV
Reverse breakdown voltage
Leakage current
Forward voltage
MAX.
UNIT
V
IF = 30 mA, tp < 300 μs, δ < 2 %
VF
500
mV
IF = 100 mA, tp < 300 μs, δ < 2 %
VF
800
mV
VR = 1 V, f = 1 MHz
CD
10
pF
IF = 10 mA, IR = 10 mA,
iR = 1 mA, RL = 100 Ω
trr
5
ns
Diode capacitance
Reverse recovery time
TYP.
0.1 [0.004] max.
0.20 [0.008]
0.08 [0.003]
0.75 [0.029]
0.1 [0.004]
0.3 [0.012]
0.55 [0.021]
PACKAGE DIMENSIONS in millimeters [inches]: SOD-523
0.9 [0.035]
0.85 [0.033] min.
0.17 [0.007]
0.37 [0.015]
0.7 [0.028]
1.7 [0.067]
1.5 [0.059]
1.3 [0.051]
1.1 [0.043]
0.5 [0.020]
0.35 [0.014]
0.18 [0.007]
Footprint recommendation:
1.45 [0.057]
Document no.: S8-V-3880.02-003 (4)
Created - Date: 04. April 2017
Rev. 4 - Date: 03. Aug. 2020
23093
0.35 [0.014]
Rev. 1.8, 20-Jan-2022
Document Number: 85633
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024