BAT54CW

BAT54W(AW)(CW)(SW) Technical Data Data Sheet N0027, Rev. C BAT54W/AW/CW/SW SCHOTTKY BARRIER DIODE Features      Extremely Fast Switching Speed Low forward voltage This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request SOT-323 BAT54W BAT54AW BAT54CW BAT54SW MARKING:KL5 MARKING:KL6 MARKING:KL7 MARKING:KL8 Maximum Ratings@TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Limit Units VRRM VRWM VR 30 V Forward Continuous Current IFM 200 mA Repetitive Peak Forward Current @ t≤1s,δ≤0.5 IFRM 300 mA Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 600 mA Pd 200 mW RθJA 500 °C/W Junction Temperature Range TJ 125 °C Storage Temperature Range TSTG -55 to +150 °C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Power Dissipation Typical Thermal Resistance Junction to Ambient  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  BAT54W(AW)(CW)(SW) Technical Data Data Sheet N0027, Rev. C Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Symbol Forward Voltage* VF Reverse Leakage Current* IR Max 0.24 0.32 0.40 0.50 1.0 2 Units μA IF=0.1mA IF=1mA IF=10mA IF=30mA IF=100mA VR=25V Diode capacitance CT 10 pF VR=1V,f=1.0MHz Reverse recovery time trr 5 ns IF= IR=10mA, Irr=0.1×IR, RL=100Ω V Test Condition * Pulse width < 300 µs, duty cycle < 2% Ratings and Characteristics Curves  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  BAT54W(AW)(CW)(SW) Technical Data Data Sheet N0027, Rev. C Ordering Information Device BAT54W/AW/CW/SW Package Shipping SOT-323(Pb-Free) 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification. Mechanical Dimensions SOT-323 SYMBOL Millimeters Inches MIN. MAX. MIN. MAX. A A1 A2 b 0.900 0.000 0.900 0.200 1.100 0.100 1.000 0.400 0.035 0.000 0.035 0.008 0.043 0.004 0.039 0.016 c 0.080 0.150 0.003 0.006 D E E1 e e1 L 2.000 2.200 1.150 1.350 2.150 2.450 0.650 TYP. 1.200 1.400 0.525 REF. 0.079 0.087 0.045 0.053 0.085 0.096 0.026 TYP. 0.047 0.055 0.021 REF. L1 0.260 0.460 0.010 0.018 θ 0° 8° 0° 8° Carrier Tape Specification SOT-323 SYMBOL A B C d E F P P0 P1 W Min. 2.20 2.50 1.14 1.45 1.65 3.40 3.90 3.90 1.90 7.90  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com  Millimeters Max. 2.30 2.60 1.24 1.65 1.85 3.60 4.10 4.10 2.10 8.30 BAT54W(AW)(CW)(SW) Technical Data Data Sheet N0027, Rev. C DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC Diode Solutions sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC Diode Solutions be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC Diode Solution assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC Diode Solutions be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC Diode Solutions. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC Diode Solutions. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations..  China - Germany - Korea - Singapore - United States   http://www.smc-diodes.com - sales@ smc-diodes.com 