BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
FEATURES
• Silicon epitaxial planar diodes
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• General purposes
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
MECHANICAL DATA
Case: QuadroMELF (SOD-80)
Weight: approx. 34 mg
Cathode band color: black
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape), 10K/box
GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
PARTS TABLE
PART
BAV200
BAV201
BAV202
BAV203
TYPE
DIFFERENTIATION
VRRM = 60 V
VRRM = 120 V
VRRM = 200 V
VRRM = 250 V
ORDERING CODE
BAV200-GS18 or BAV200-GS08
BAV201-GS18 or BAV201-GS08
BAV202-GS18 or BAV202-GS08
BAV203-GS18 or BAV203-GS08
TYPE
MARKING
-
CIRCUIT
CONFIGURATION
Single
Single
Single
Single
REMARKS
Tape and reel
Tape and reel
Tape and reel
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Repetitive peak reverse voltage
Reverse voltage
Forward continuous current
Peak forward surge current
Repetitive peak forward current
Power dissipation
PART
BAV200
BAV201
BAV202
BAV203
BAV200
BAV201
BAV202
BAV203
tp = 1 s, Tj = 25 °C
f = 50 Hz
SYMBOL
VRRM
VRRM
VRRM
VRRM
VR
VR
VR
VR
IF
IFSM
IFRM
Ptot
VALUE
60
120
200
250
50
100
150
200
250
1
625
500
UNIT
V
V
V
V
V
V
V
V
mA
A
mA
mW
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air
Junction temperature
Storage temperature range
TEST CONDITION
On PC board
50 mm x 50 mm x 1.6 mm
SYMBOL
VALUE
UNIT
RthJA
500
K/W
Tj
Tstg
175
-65 to +175
°C
°C
Rev. 1.9, 26-Nov-2021
Document Number: 85544
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Forward voltage
TEST CONDITION
IF = 100 mA
VR = 50 V
VR = 100 V
VR = 150 V
VR = 200 V
Tj = 100 °C, VR = 50 V
Tj = 100 °C, VR = 100 V
Tj = 100 °C, VR = 150 V
Tj = 100 °C, VR = 200 V
Reverse current
IR = 100 μA, tp/T = 0.01,
tp = 0.3 ms
Breakdown voltage
Diode capacitance
Differential forward resistance
VR = 0, f = 1 MHz
IF = 10 mA
IF = IR = 30 mA, iR = 3 mA,
RL = 100 Ω
Reverse recovery time
PART
BAV200
BAV201
BAV202
BAV203
BAV200
BAV201
BAV202
BAV203
BAV200
BAV201
BAV202
BAV203
SYMBOL
VF
IR
IR
IR
IR
IR
IR
IR
IR
V(BR)
V(BR)
V(BR)
V(BR)
CD
rf
MIN.
TYP.
MAX.
1
100
100
100
100
15
15
15
15
UNIT
V
nA
nA
nA
nA
μA
μA
μA
μA
V
V
V
V
pF
Ω
50
ns
60
120
200
250
1.5
5
trr
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
rf - Differential Forward Resistance (Ω)
I R - Reverse Current (µA)
1000
100
Scattering Limit
10
1
VR = VRRM
0.1
0.01
0
40
80
120
160
200
Tj - Junction Temperature (°C)
94 9084
1000
100
Tj = 25 °C
10
1
0.1
94 9089
Fig. 1 - Reverse Current vs. Junction Temperature
1
10
100
I F - Forward Current (mA)
Fig. 3 - Differential Forward Resistance vs. Forward Current
I F - Forward Current (mA)
1000
Tj = 25 °C
100
Scattering Limit
10
1
0.1
0
94 9085
0.4
0.8
1.2
1.6
2.0
V F - Forward Voltage (V)
Fig. 2 - Forward Current vs. Forward Voltage
Rev. 1.9, 26-Nov-2021
Document Number: 85544
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAV200, BAV201, BAV202, BAV203
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): QuadroMELF (SOD-80)
1.6 (0.063)
1.4 (0.055)
1.
7
(0
.0
gl
as 6 7 )
s
Cathode identification
> R3 (R0.118)
glass
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
The gap between plug and glass can
be either on cathode or anode side
Foot print recommendation:
2.5 (0.098) max.
2 (0.079) min.
1.25 (0.049) min.
5 (0.197) ref.
96 12071
Rev. 1.9, 26-Nov-2021
Document Number: 85544
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000