MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
Interference Suppression Film Capacitor - Class Y2
Radial MKP 300 VAC - Line to Ground Application
FEATURES
• AEC-Q200 qualified (rev. C) up to 105 °C
• Compliant with IEC 60381-14: AMD1 grade IIB
for pitch ≥ 15 mm
- THB: 85 °C / 85 % RH, 500 h at URAC
• Compliant with IEC 60381-14: AMD1 grade IA
for pitch < 15 mm
- THB: 40 °C / 93 % RH, 21 days at URAC
• High temperature capabilities, up to 125 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Standard line bypass (between line and ground) Y2
applications
• Line bypass application for continuous operation
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
Capacitance range (E12 series)
Capacitance tolerance
Rated AC voltage
Permissible DC voltage
Climatic testing class
acc. to IEC 60068-1
Rated temperature
Maximum permissible temperature
Reference standards
Dielectric
Electrodes
0.001 μF to 0.47 μF
(preferred values acc. to E6)
± 20 %, ± 10 %, ± 5 %
300 VAC; 50 Hz to 60 Hz
1000 VDC at 105 °C
1500 VDC at 85 °C
55/105/56/C for product volumes ≤ 1750 mm3
55/105/56/B for volumes > 1750 mm3
105 °C
125 °C for limited time
IEC 60384-14:2013; IEC 60384-14:2013 / AMD1:2016
EN 60384-14:2013 + AMD1:2016
IEC 60065 requires pass. flamm. class B for volumes > 1750 mm3
UL 60384-14 2nd edition; ENEC; CSA E60384-1:14 3rd edition
Polypropylene film
Metallized film
Series construction (for > 10 mm pitch)
Construction
Triple construction (for 7.5 mm and 10 mm pitch)
Encapsulation
Leads
Marking
Plastic case, epoxy resin sealed, flame retardant class UL 94 V-0
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric
material; manufacturer location, year and week; manufacturer’s logo or name; safety approvals
Note
• For more detailed data and test requirements, contact rfi@vishay.com
DIMENSIONS
l
w
h
lt
P
Revision: 15-Jan-2024
Ø dt
Document Number: 28114
1
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
7.5 mm
7.5 mm (bent back)
10.0 mm
338 6
Y2
15.0 mm
22.5 mm
27.5 mm
BFC2
2222 (*)
MULTIPLIER (nF)
0.1
2
1
3
10
4
100
5
CAPACITANCE
(numerically)
338
338
6X
6X
XX X
XX X
Example:
104 = 10 x 10 = 100 nF
(except special numbers)
(*) old ordering code
TYPE
PACKAGING
Loose in box
338 6
Y2
Taped ammo (1)
Taped reel
338 6
Y2
338 6
Y2
Loose in box
Taped reel (1)
LEAD CONFIGURATION (see tables for details)
Lead length 3.5 mm + 1 mm / - 0.5 mm (pitch 7.5 mm and 10 mm)
Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm)
Lead length 5.0 mm ± 1.0 mm
Lead length 25.0 mm ± 2.0 mm
Pitch 7.5 mm only to 15 mm; H = 18.5 mm
ALTERNATIVE PITCH SIZES
Lead length 3.5 mm + 1 mm / - 0.5 mm (pitch 7.5 mm and 10 mm)
Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm)
Lead length 5.0 mm ± 1.0 mm
Lead length 25.0 mm ± 2.0 mm
ALTERNATIVE TAPED VERSIONS
Pitch = 7.5 mm and 10.0 mm
H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm
Pitch bent back to 7.5 mm
H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm
ALTERNATIVE C-TOL.
338 6
Y2
Lead length 5.0 mm ± 1.0 mm
Lead length 25.0 mm ± 2.0 mm
Taped ammo (1)
Taped reel
(1)
Pitch = 7.5 mm
H = 18.5 mm; P0 = 12.7 mm
Pitch bent back to 7.5 mm
H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm
Pitch = 7.5 mm and 10 mm
H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm
PREFERRED TYPES
BFC2 338 60…
± 20 %
Pitch = 7.5 mm
H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm / - 0.5 mm (pitch 7.5 mm and 10 mm)
Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm)
Loose in box
C-TOL.
BFC2 338 62…
BFC2 338 64…
BFC2 338 66…
BFC2 338 68…
ON REQUEST
± 20 %
See tables for detail
ON REQUEST
± 20 %
See tables for detail
ON REQUEST
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
See tables for detail
Note
(1) For detailed tape specification refer to “Packaging Information” www.vishay.com/doc?28139
Revision: 15-Jan-2024
Document Number: 28114
2
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URAC)
300 V
1000 VDC at 105 °C
1500 VDC at 85 °C
Permissible DC voltage (URDC)
Tangent of loss angle
C ≤ 470 nF
at 1 kHz
at 10 kHz
≤ 10 x 10-4
≤ 20 x 10-4
Rated voltage pulse slope (dU/dt)R at 420 VDC
Pitch = 7.5 mm
Pitch = 10 mm
Pitch = 15 mm
Pitch = 22.5 mm
Pitch = 27.5 mm
1500 V/μs
1000 V/μs
750 V/μs
600 V/μs
450 V/μs
R between leads, for C ≤ 0.33 μF at 100 V; 1 min
> 15 000 MΩ
RC between leads, for C > 0.33 μF at 100 V; 1 min
> 5000 s
R between leads and case; 100 V; 1 min
> 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s
3400 V; 1 min
Withstanding (AC) voltage between leads and case
2100 V; 1 min
Rated temperature
105 °C
Maximum permissible temperature
125 °C up to 500 h
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 7.5 mm
URAC
(V)
CAP.
(μF)
0.0010
60102
62102
64102
66102
68129
0.0012
60122
62122
64122
66122
68131
60152
62152
60182
62182
0.0022
60222
62222
64222
66222
68134
0.0027
60272
62272
64272
66272
68135
0.0015
0.0018
0.0033
0.0039
0.0047
300
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
LOOSE IN BOX
REEL
DIMENSIONS
AMMOPACK
MASS
Ø = 500 mm (1)(2)
SHORT LEADS
LONG LEADS
wxhxl
(g) (3) l = 3.5 mm
lt =
t
(mm) (4)
H = 18.5 mm;
H = 18.5 mm;
lt = 5.0 mm
+ 1 mm /
± 1.0 mm SPQ 25.0 mm SPQ P0 = 12.7 mm SPQ P0 = 12.7 mm SPQ
- 0.5 mm
± 2.0 mm
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 20 % (URDC = 1000 V)
0.0056
4.0 x 9.0 x 10.0
0.4
5.0 x 10.5 x 10.0
0.4
6.0 x 11.5 x 10.0
0.8
60332
62332
60392
62392
60472
62472
60562
62562
1500
1000
750
64152
64182
64332
64392
64472
64562
1000
1250
1000
66152
66182
66332
66392
66472
66562
1250
1000
750
68132
68133
68136
68137
68138
68139
2500
2000
1900
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 % (URDC = 1000 V)
0.0010
61102
63102
65102
0.0012
61122
63122
65122
61152
63152
61182
63182
0.0022
61222
63222
65222
0.0027
61272
63272
65272
0.0033
61332
63332
61392
63392
61472
61562
63472
63562
0.0015
0.0018
0.0039
0.0047
0.0056
4.0 x 9.0 x 10.0
0.4
5.0 x 10.5 x 10.0
0.4
6.0 x 11.5 x 10.0
0.8
Revision: 15-Jan-2024
1500
1000
750
65152
65182
65332
65392
65472
65562
1250
68179
68181
68182
68183
68184
68185
2500
67332
67392
1000
68186
68187
2000
67472
67562
750
68188
68189
1900
1000
67102
67122
67152
67182
67222
67272
1250
1000
Document Number: 28114
3
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 7.5 mm
URAC
(V)
CAP.
(μF)
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
300
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
LOOSE IN BOX
REEL
DIMENSIONS
AMMOPACK
MASS
Ø = 500 mm (1)(2)
SHORT LEADS
LONG LEADS
wxhxl
(g) (3) l = 3.5 mm
lt =
t
(mm) (4)
H = 18.5 mm;
H = 18.5 mm;
+ 1 mm / lt = 5.0 mm SPQ 25.0 mm SPQ
SPQ
SPQ
± 1.0 mm
P0 = 12.7 mm
P0 = 12.7 mm
- 0.5 mm
± 2.0 mm
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 5 % (URDC = 1000 V)
68215
68225
68235
68335
68346
68216
68226
68236
68336
68347
4.0 x 9.0 x 10.0
0.4
68217
68227
1500
68237
1000
68337
1250
68348
2500
68218
68228
68238
68338
68349
68219
68229
68239
68339
68351
68221
68231
68241
68341
68352
5.0 x 10.5 x 10.0
0.4
1000
1250
1000
2000
68222
68232
68242
68342
68353
68223
68233
68243
68343
68354
6.0 x 11.5 x 10.0
0.8
750
1000
750
1900
68224
68234
68244
68344
68355
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
(4) For tolerances see section “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 10 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
300
CAP.
(μF)
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
AMMOPACK
REEL
Ø = 500 mm (1)(2)
lt = 3.5 mm
lt =
lt = 5.0 mm
H = 18.5 mm;
H = 18.5 mm;
+ 1 mm /
SPQ 25.0 mm SPQ
SPQ
P0 = 12.7 mm
± 1.0 mm
P0 = 12.7 mm
- 0.5 mm
± 2.0 mm
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % (URDC = 1000 V)
68418
68392
68401
68409
68393
68402
68411
68419
68394
68403
68412
68421
68395
68404
68413
68422
4.0 x 10.0 x 12.5
0.6
1000
1250
68396
68405
68414
68423
68397
68406
68415
68424
68398
68407
68416
68425
68399
68408
68417
68426
68101
68106
68112
68141
5.0 x 11.0 x 12.5
0.82
68102
68107
1000
68113
1000
68142
68103
68108
68114
68143
68104
68109
68115
68144
6.0 x 12.0 x 12.5
1.1
750
750
68105
68111
68116
68145
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % (URDC = 1000 V)
68436
68445
68454
68463
68437
68446
68455
68464
68438
68447
68456
68465
68439
68448
68457
68466
4.0 x 10.0 x 12.5
0.6
1000
1250
68441
68449
68458
68467
68442
68451
68459
68468
68443
68452
68461
68469
68444
68453
68462
68471
68159
68164
68168
68191
5.0 x 11.0 x 12.5
0.82
1000
1000
68161
68165
68169
68192
68162
68166
68171
68193
6.0 x 12.0 x 12.5
1.1
750
750
68163
68167
68172
68194
Revision: 15-Jan-2024
SPQ
1400
1100
900
1400
1100
900
Document Number: 28114
4
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 10 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
REEL
Ø = 500 mm (1)(2)
AMMOPACK
lt = 3.5 mm
lt =
lt = 5.0 mm
H = 18.5 mm;
H = 18.5 mm;
+ 1 mm /
SPQ 25.0 mm SPQ
SPQ
SPQ
P0 = 12.7 mm
± 1.0 mm
P0 = 12.7 mm
- 0.5 mm
± 2.0 mm
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % (URDC = 1000 V)
0.0010
68481
68489
68498
68507
0.0012
68482
68491
68499
68508
0.0015
68483
68492
68501
68509
0.0018
68484
68493
68502
68485
68494
0.0027
68486
68495
68504
0.0033
68487
68496
68505
0.0039
68488
68497
68506
68515
0.0047
68245
68249
68254
68357
68246
68251
0.0022
300
0.0056
0.0068
0.0082
4.0 x 10.0 x 12.5
0.6
5.0 x 11.0 x 12.5
0.82
6.0 x 12.0 x 12.5
1.1
68247
68252
68248
68253
1000
1000
750
68503
68255
68256
68257
68511
1250
68512
-
1400
68513
-
68514
1000
68358
68359
750
68361
1100
900
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
(4) For tolerances see section “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 15 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
lt = 3.5 mm lt = 5.0 mm
SPQ
± 0.3 mm
± 1.0 mm
REEL
Ø = 500 mm (1)(2)
AMMOPACK
lt =
H = 18.5 mm;
H = 18.5 mm;
25.0 mm SPQ
SPQ
SPQ
P0 = 12.7 mm
P0 = 12.7 mm
± 2.0 mm
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 % (URDC = 1000 V)
0.0068
60682
62682
64682
68146
0.0082
60822
62822
64822
68147
60103
62103
0.010
300
5.0 x 11.0 x 17.5
1.0
1000
64103
0.012
60123
62123
64123
0.015
60153
62153
64153
60183
62183
0.018
6.0 x 12.0 x 17.5
1.4
1000
64183
1000
-
-
68148
68149
68151
1000
1100
68152
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % (URDC = 1000 V)
0.022
0.027
0.033
0.039
0.047
0.056
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3.0
Revision: 15-Jan-2024
60223
62223
60273
62273
60333
62333
60393
62393
60473
62473
60563
62563
750
750
500
64223
64273
64333
64393
64473
64563
68153
500
500
450
68154
-
-
68155
68156
68157
68158
800
650
600
Document Number: 28114
5
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 15 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
lt = 3.5 mm lt = 5.0 mm
SPQ
± 0.3 mm
± 1.0 mm
REEL
Ø = 500 mm (1)(2)
AMMOPACK
lt =
H = 18.5 mm;
H = 18.5 mm;
25.0 mm SPQ
SPQ
SPQ
P0 = 12.7 mm
P0 = 12.7 mm
± 2.0 mm
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 % (URDC = 1000 V)
0.0068
61682
63682
65682
68202
0.0082
61822
63822
65822
68203
61103
63103
65103
68204
0.012
61123
63123
0.015
61153
63153
65153
68206
61183
63183
65183
68207
0.010
0.018
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1000
65123
1000
-
-
1100
68205
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % (URDC = 1000 V)
0.022
0.027
0.033
0.039
300
0.047
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3
61223
63223
61273
63273
61333
63333
61393
63393
61473
63473
68208
65223
750
65273
500
65393
65473
68209
500
65333
-
-
68211
68212
450
68213
800
650
600
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 % (URDC = 1000 V)
0.0068
0.0082
5.0 x 11.0 x 17.5
1.0
0.010
0.012
0.015
6.0 x 12.0 x 17.5
1.4
68258
68284
68309
68381
68259
68285
68311
68382
68261
68286
68262
68287
68313
68384
68263
68288
68314
68385
1000
68312
1000
-
-
1100
68383
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % (URDC = 1000 V)
0.018
0.022
0.027
0.033
0.039
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3.0
68264
68289
68315
68386
68265
68291
68316
68387
68266
68292
68267
68293
68268
68294
750
68317
500
68318
500
68319
-
-
68388
68389
450
68391
800
650
600
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
(4) For tolerances see section “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Revision: 15-Jan-2024
Document Number: 28114
6
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 22.5 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
lt = 3.5 mm lt = 5.0 mm
SPQ
± 0.3 mm
± 1.0 mm
REEL
Ø = 500 mm (1)(2)
AMMOPACK
lt =
H = 18.5 mm;
H = 18.5 mm;
25.0 mm SPQ
SPQ
SPQ
P0 = 12.7 mm
P0 = 12.7 mm
± 2.0 mm
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % (URDC = 1000 V)
0.047
0.056
0.068
0.082
0.10
0.12
0.15
7.0 x 16.5 x 26.0
2.9
8.5 x 18.0 x 26.0
3.8
10.0 x 19.5 x 26.0
6.8
12.0 x 22.0 x 26.0
7.8
68123
68125
68124
68126
60683
62683
60823
62823
60104
62104
60124
62124
60154
62154
200
200
200
150
68127
68128
64683
64823
64104
64124
64154
250
250
-
-
-
-
-
-
-
-
200
200
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % (URDC = 1000 V)
0.047
0.056
300
0.068
0.082
0.10
0.12
0.15
7.0 x 16.5 x 26.0
2.9
8.5 x 18.0 x 26.0
3.8
10.0 x 19.5 x 26.0
6.8
12.0 x 22.0 x 26.0
7.8
68173
68175
68177
68174
68176
68178
61683
63683
200
65683
61823
63823
65823
61104
63104
65104
61124
63124
61154
63154
150
250
65124
65154
200
-
-
200
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % (URDC = 1000 V)
0.047
0.056
0.068
0.082
0.10
0.12
7.0 x 16.5 x 26.0
2.9
8.5 x 18.0 x 26.0
3.8
10.0 x 19.5 x 26.0
6.8
12.0 x 22.0 x 26.0
7.8
68269
68295
68271
68296
68272
68297
68273
68298
68274
68299
68275
68301
68321
200
68322
250
68323
-
68324
150
68325
-
200
68326
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
(4) For tolerances see section “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
Revision: 15-Jan-2024
Document Number: 28114
7
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 27.5 mm
CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm) (4)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
lt = 3.5 mm lt = 5.0 mm
SPQ
± 0.3 mm
± 1.0 mm
REEL
Ø = 500 mm (1)(2)
AMMOPACK
lt =
H = 18.5 mm;
H = 18.5 mm;
25.0 mm SPQ
SPQ
SPQ
P0 = 12.7 mm
P0 = 12.7 mm
± 2.0 mm
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % (URDC = 1000 V)
0.18
0.22
0.27
0.33
0.39
0.47
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.0
12.3
18.0 x 28.0 x 31.0
16.1
21.0 x 31.0 x 31.0
20.3
60184
62184
60224
62224
60274
62274
60334
62334
60394
62394
60474
62474
100
100
100
50
64184
64224
64274
64334
64394
64474
125
125
-
-
-
-
-
-
-
-
100
75
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 % (URDC = 1000 V)
300
0.18
13.0 x 23.0 x 31.0
9.2
61184
63184
0.22
15.0 x 25.0 x 31.0
12.3
61224
63224
18.0 x 28.0 x 31.0
16.1
21.0 x 31.0 x 31.0
20.3
0.27
0.33
0.39
0.47
61274
63274
61334
63334
61394
63394
61474
63474
65184
100
65224
65274
65334
50
65394
65474
125
100
-
-
75
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 % (URDC = 1000 V)
0.15
0.18
0.22
0.27
0.33
0.39
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.5
12.3
18.0 x 28.0 x 31.5
16.1
21.0 x 31.0 x 31.0
20.3
68276
68302
68277
68303
68278
68304
68279
68305
68281
68306
68282
68307
68327
68328
100
125
68329
68331
100
-
-
68332
50
68333
75
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
(4) For tolerances see section “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
APPROVALS
SAFETY APPROVALS Y2
VOLTAGE
VALUE
FILE NUMBERS
LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
300 VAC
1 nF to 470 nF
ENEC16/FI/21/01048/A2
www.vishay.com/doc?28212
UL 60384-14 2nd edition
300 VAC
1 nF to 470 nF
E354331
300 VAC
1 nF to 470 nF
E354331
300 VAC
1 nF to 470 nF
FI-39810/A1
CSA E60384-1:14
3rd
CB-test certificate
edition
www.vishay.com/doc?28189
www.vishay.com/doc?28213
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
Revision: 15-Jan-2024
Document Number: 28114
8
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for
mounting in printed circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
SPACE REQUIREMENTS FOR PRINTED-CIRCUIT BOARD APPLICATIONS AND DIMENSION
TOLERANCES
The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed-circuit
board is shown in the drawings:
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm
• For products with 15 mm < pitch, ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh following
• For products with pitch ≤ 10 mm, Δl = 0.3 mm and Δw = Δh = 0.3 mm
• For products with pitch = 15 mm, Δl = 0.5 mm and Δw = Δh = 0.5 mm
• For products with 15 mm < pitch ≤ 27.5 mm, Δl = 1.0 mm and Δw = Δh = 0.5 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 15-Jan-2024
Document Number: 28114
9
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
CHARACTERISTICS
Axis Title
Axis Title
10000
Typical
1st line
2nd line
2nd line
ΔC/C (%)
1000
0
Maximum
-2
100
-4
1000
100
C > 220 nF
47 nF < C ≤ 220 nF
100
10
C ≤ 10 nF
Minimum
10 nF < C ≤ 47 nF
10
-6
-50
0
50
1st line
2nd line
2
10000
1000
2nd line
Dissipation Factor (x 10-4)
4
1
100
10
100
1000
10 000
10
100 000
Ambient Temperature (°C)
Frequency (Hz)
Capacitance as a function of ambient temperature
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
Axis Title
Axis Title
10000
1000
100
10000
10
1000
1 nF
4.7 nF
100
100 nF
100
470 nF
1st line
2nd line
47 nF
1
2nd line
Frequency (MHz)
1000
10
1st line
2nd line
2nd line
Impedance (Ω)
10 nF
Y2
100
1
0.1
0.01
10 000
100 000
1M
10M
10
100M
10
10 000
0.1
1
10
100
1000
Frequency (Hz)
Capacitance (nF)
Impedance as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
Axis Title
Axis Title
1000
10000
1000
10000
470 nF
100 nF
100
1000
47 nF
10 nF
10
4.7 nF
Tamb ≤ 105 °C
Tamb ≤ 105 °C
10
100
100
1 nF
1
10
1st line
2nd line
100
2nd line
AC Current (mA)
1st line
2nd line
2nd line
AC Voltage (V)
100
1000
1000
10 000
10
100 000
0.1
10
100
1000
10 000
10
100 000
Frequency (Hz)
Frequency (Hz)
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
Revision: 15-Jan-2024
Document Number: 28114
10
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
Axis Title
1 000 000
10000
RC (s)
1st line
1st line
2nd line
1000
100 000
100
10
10 000
0
20
40
60
80
100
Tamb (°C)
Insulation resistance as a function of ambient temperature
APPLICATION NOTES
• For Y2 electromagnetic interference suppression in standard line bypass applications (between line and ground) (50 Hz /
60 Hz) with a maximum mains voltage of 300 VAC.
• For series impedance applications we refer to the application note: www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact rfi@vishay.com
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used.
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-4 (2013) and Specific Reference Data.”
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General Data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle:
at 10 kHz
4.3 Robustness of
terminations
Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
4.4 Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Revision: 15-Jan-2024
No visible damage
Document Number: 28114
11
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.19 Component solvent
resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured initially
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
at 10 kHz
4.20 Solvent resistance of the marking:
Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5 min ± 0.5 min
4.6
θA = -55 °C
θB = +105 °C
5 cycles
Duration t = 30 min
Rapid change of temperature
4.6.1 Inspection
Visual examination
4.7
Mounting: see section “Mounting” of this
specification
Procedure B4:
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s2
(whichever is less severe)
Total duration 6 h
Vibration
4.7.2 Final inspection
Visual examination
4.9
Mounting: see section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
Shock
4.9.2 Final measurements
Revision: 15-Jan-2024
No visible damage
Legible marking
No visible damage
No visible damage
Visual examination
No visible damage
Capacitance
|ΔC/C| ≤ 5 % of the value measured initially
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
Document Number: 28114
12
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS C1A AND
C1B
4.11
Climatic sequence
4.11.1 Initial measurements
Capacitance
measured in 4.4.2 and 4.9.2
Tangent of loss angle:
measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: -55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured in 4.11.1
Voltage proof
2250 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.12
Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH, no load
Capacitance
4.12.1 Initial measurements
Tangent of loss angle at 1 kHz
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan δ ≤ 0.007
Compared to values measured in 4.12.1.
Voltage proof
2250 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 15-Jan-2024
Document Number: 28114
13
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
at 10 kHz
4.13
Impulse voltage
3 successive impulses, full wave, peak
voltage:
X1: 5 kV
Max. 24 pulses
4.14
Endurance
Duration: 1000 h
1.7 x URAC at 105 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of 47 Ω ±
5%
4.14.7 Final measurements
No selfhealing breakdowns or flash-over
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured in 4.13.1.
Voltage proof
2250 VDC; 1 min between terminations
2100 VAC; 1 min between terminations
and case
No permanent breakdown or flash-over
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15
Charge and discharge
10 000 cycles
charged to 420 VDC
Discharge resistance:
420 V DC
R = --------------------------------------1.5 x C (dU/dt)
4.15.1 Initial measurements
Capacitance
Tangent of loss angle:
at 10 kHz
4.15.3 Final measurements
Capacitance
|ΔC/C| ≤ 10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured in 4.15.1.
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Resonance frequency
≥ 0.9 times the value as specified in section
“Resonant Frequency” of this specification
SUB-GROUP C5
4.16
Radio frequency characteristic
Revision: 15-Jan-2024
Document Number: 28114
14
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C6
4.17 Passive flammability
Class B
CONDITIONS
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm3:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
PERFORMANCE REQUIREMENTS
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
12 mm
~ 8 mm
45.0 °
SUB-GROUP C7
4.18 Active flammability
SUB-GROUP ADDITIONAL TEST
(FOR PITCH ≥ 15 mm)
Damp heat steady state with voltage
20 cycles of 5 kV discharges on the test
capacitor connected to URAC.
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
RH: 85 %, temperature: 85 °C;
Voltage: 300 VAC, duration: 500 h
Initial measurements
Capacitance
Tangent of loss angle:
at 10 kHz
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
||ΔC/C| ≤ 10 % of the value with initial
measurement
Tangent of loss angle
Increase of tan δ ≤ 0.024
Compared to values with initial
measurement
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP ADDITIONAL TEST
Damp heat steady state with voltage
Initial measurements
RH: 40 %, temp.: 93 °C
Voltage: 300 VAC, duration: 21 days
Capacitance
Tangent of loss angle: at 10 kHz
Final measurements
Revision: 15-Jan-2024
Visual examination
No visible damage
Legible marking
Capacitance
Tangent of loss angle
|ΔC/C| ≤ 10 % of the value with initial
measurement
Increase of tan δ ≤ 0.024
Compared to values with initial
measurement
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 28114
15
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 6 Y2
www.vishay.com
Vishay BCcomponents
TEST CONDITIONS AND REQUIREMENTS ACCORDING AEC-Q200 REVISION C
NO.
TEST NAME
REFERENCE
1
Pre- and post-stress
electrical test
-
2
High temperature
exposure (storage)
3
Temperature cycling
JESD22
method JA-104
4
Moisture resistance
5
TEST CONDITIONS
PERFORMANCE REQUIREMENTS
-
User spec.
1000 h; 105 °C; unpowered
|ΔC/C| ≤ ± 5 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR ≥ 50 % of initial requirement
1000 cycles: -55 °C to +105 °C
10 min. dwell time each
|ΔC/C| ≤ ± 5 %
Increase of tan δ = 0.008 at 10 kHz
IR ≥ 50 % of initial requirement
MIL-STD 202
method 106
10 cycles at 24 h/cycle, unpowered
|ΔC/C| ≤ ± 5 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR ≥ 50 % of initial requirement
Biased humidity
MIL-STD 202
method 103
1000 h; 40 °C; 93 % RH with URAC
|ΔC/C| ≤ ± 10 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR ≥ 50 % of initial requirement
6
Operational life
MIL-STD 202
method 108
Tamb = 105 °C;
1000 h; Utest = 1 x URAC
|ΔC/C| ≤ ± 10 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR ≥ 50 % of initial requirement
7
Terminal strength
(leaded)
MIL-STD 202
method 211
Leaded device lead integrity only.
|ΔC/C| ≤ ± 5 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR = initial requirement
8
Resistance to solvents
MIL-STD 202
method 215
Short term
No visual damage
Legible marking
9
Mechanical shock
MIL-STD 202
method 213
Figure a of method 213, condition C
No visual damage
10
Vibration
MIL-STD 202
method 204
5 g's for 20 min;
12 cycles, 3 orientations
No visual damage
11
Resistance to
soldering heat
MIL-STD 202
method 210
260 °C; 10 s
|ΔC/C| ≤ ± 5 %
Increase of tan δ
0.008 for C ≤ 1 μF at 10 kHz
IR = initial requirement
12
Solderability
J-STD-002
235 °C / 5 s
Good tinning as evidence by free flowing
of the solder with wetting of terminations
> 95 %
13
Electrical
characterization
User spec.
-
User spec.
14
Flammability
Electrical test not required
Maximum permitted burning time < 10 s
Revision: 15-Jan-2024
MIL-STD 202
method 108
UL 94
Document Number: 28114
16
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024
