MKT 369
Vishay BCcomponents
Metallized Polyester Film Capacitors
MKT Radial Potted Type
FEATURES
168x12(halfpage)
l
Available taped on reel and loose in box
w
seating
plane (1)
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
h
d1.5
CAPACITANCE TOLERANCE
± 10 %; ± 5 %
lt
RATED (DC) VOLTAGE
Ø1.3
63 V; 100 V; 250 V; 400 V; 630 V
P 0.4
Ødt
Dimensions in mm
RATED (AC) VOLTAGE
(1) Hole ∅ 1.0 for dt = 0.6 mm
40 V; 63 V; 160 V; 220 V; 250 V
APPLICATIONS
CLIMATIC CATEGORY
Blocking and coupling. Bypass and energy reservoir
MARKING
55/105/56
RATED TEMPERATURE
C-value; tolerance; rated voltage
85 °C
DIELECTRIC
MAXIMUM APPLICATION TEMPERATURE
Polyester film
105 °C
REFERENCE SPECIFICATIONS
ELECTRODES
IEC 60384-2
Vacuum deposited aluminium
PERFORMANCE GRADE
COATING
Flame retardant epoxy material (UL-class 94 V-0)
Grade 1 (long life)
DETAIL SPECIFICATION
CONSTRUCTION
For more detailed data and test requirements see “Type
detail specification HQN-384-02/101”
Wound mono construction
LEADS
Tinned wire
CA PACITANCE RANGE (E12 SERIES)
0.001 to 1.0 µF
Document Number: 28133
Revision: 20-Oct-2022
For technical questions, contact: dc-film@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT 369
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
369
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
10.0 mm
0.1
2
1
3
10
4
100
5
Example:
2222 369
BFC2* 369
XX XX X
XX XX X
104
10 x 10
100 nF
* Use this partnumber for those with access
to the Vishay’s SAP system and Partners
website within the Americas
ON REQUEST
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL
straight leads 4.0 1.0/0.5 mm
loose in box
straight leads 22.0 r4.0 mm
369
taped on reel
H 18.5 mm; P0 12.7 mm;
reel diameter 500 mm
63 V
100 V
250 V
400 V
630 V
r10 %
15
25
45
55
65
r5 %
16
26
46
56
66
r10 %
11
21
41
51
61
r5 %
12
22
42
52
62
r10 %
18
28
48
58
68
r5 %
19
29
49
59
69
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Tangent of loss angle:
at 1 kHz
at 10 kHz
at 100 kHz
C ≤ 0.47 µF
≤ 75 × 10−4
≤ 130 × 10−4
≤ 300 × 10−4
0.47 µF < C ≤ 1.0 µF
≤ 75 × 10−4
≤ 130 × 10−4
≤ 225 × 10−4
10−4
10−4
≤ 300 × 10−4
C ≥ 0.1 µF
≤ 75 ×
Rated voltage pulse slope (dU/dt)R
at 63 V (DC)
30 V/µs
≤ 130 ×
at 100 V (DC)
28 V/µs
at 250 V (DC)
70 V/µs
at 400 V (DC)
110 V/µs
at 630 V (DC)
70 V/µs
R between leads, for C ≤ 0.33 µF:
> 15000 MΩ
at 10 V; 1 minute
> 15000 MΩ
at 100 V; 1 minute
> 30000 MΩ
> 30000 MΩ
> 30000 MΩ
at 500 V; 1 minute
RC between leads, for C > 0.33 µF:
> 5000 s
at 10 V; 1 minute
> 10000 s
at 500 V; 1 minute
R between interconnecting leads and casing;
> 30000 MΩ
at 10 V; 1 minute
> 30000 MΩ
at 100 V; 1 minute
> 30000 MΩ
> 30000 MΩ
> 30000 MΩ
at 500 V; 1 minute
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s
100 V; 1 minute 160 V; 1 minute 400 V; 1 minute 640 V; 1 minute 1 008 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute 200 V; 1 minute 500 V; 1 minute 800 V; 1 minute 1 260 V; 1 minute
www.vishay.com
2
For technical questions, contact: dc-film@vishay.com
Document Number: 28133
Revision: 20-Oct-2022
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT 369
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
URdc = 63 V; URac = 40 V
C
(µF)
DIMENSIONS
wmax x hmax x lmax
(mm)
MASS
(g)
CATALOG NUMBER 2222 369 ..... AND PACKAGING
LOOSE IN BOX
It = 4.0 + 1.0/- 0.5 mm
It = 22.0 ± 4.0 mm
C-tol = ± 10 %
last 5 digits of
catalog number
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1
4.2 × 9.3 × 12.5
3.8 × 9.0 × 12.5
4.1 × 9.3 × 12.5
4.0 × 9.2 × 12.5
4.3 × 9.5 × 12.5
4.7 × 9.8 × 12.5
5.1 × 10.2 × 12.5
5.5 × 10.7 × 12.5
6.0 × 11.1 × 12.5
REEL
SPQ
Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm
0.4
15224
2000
0.4
15274
2000
0.4
15334
2000
0.4
15394
2000
0.5
15474
2000
0.5
15564
2000
0.5
15684
2000
0.6
15824
2000
0.7
15105
2000
SPQ
SPQ
1000
1000
1000
1000
1000
1000
1000
1000
1000
1300
1300
1300
1300
1200
1200
1100
1000
900
URdc = 100 V; URac = 63 V
C
(µF)
DIMENSIONS
wmax x hmax x lmax
(mm)
MASS
(g)
CATALOG NUMBER 2222 369 ..... AND PACKAGING
LOOSE IN BOX
It = 4.0 + 1.0/- 0.5 mm
It = 22.0 ± 4.0 mm
C-tol = ± 10 %
last 5 digits of
catalog number
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
4.0 × 9.1 × 12.5
3.7 × 8.8 × 12.5
4.0 × 9.0 × 12.5
4.3 × 9.3 × 12.5
3.9 × 8.9 × 12.5
4.2 × 9.2 × 12.5
4.5 × 9.4 × 12.5
REEL
SPQ
Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm
25563
0.4
2000
25683
0.4
25823
2000
0.4
25104
2000
0.4
25124
2000
0.4
25154
2000
0.5
25184
2000
0.5
25224
2000
SPQ
SPQ
1000
1500
1000
1000
1000
1000
1000
1000
1500
1500
1500
1500
1300
1200
URdc = 250 V; URac = 160 V
C
(µF)
DIMENSIONS
wmax x hmax x lmax
(mm)
MASS
(g)
CATALOG NUMBER 2222 369 ..... AND PACKAGING
LOOSE IN BOX
It = 4.0 + 1.0/- 0.5 mm
It = 22.0 ± 4.0 mm
C-tol = ± 10 %
last 5 digits of
catalog number
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
4.2 × 8.7 × 12.5
4.6 × 8.8 × 12.5
4.0 × 8.8 × 12.5
4.5 × 9.0 × 12.5
4.6 × 8.8 × 12.5
4.6 × 9.2 × 12.5
4.4 × 9.4 × 12.5
4.7 × 9.7 × 12.5
Document Number: 28133
Revision: 20-Oct-2022
REEL
SPQ
Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm
0.4
45273
2000
0.5
45333
2000
0.4
45393
2000
0.5
45473
2000
0.5
45563
2000
0.5
45683
2000
0.5
45823
2000
0.5
45104
2000
For technical questions, contact: dc-film@vishay.com
SPQ
SPQ
1000
1000
1000
1000
1000
1000
1000
1000
1500
1300
1500
1500
1300
1300
1200
1200
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT 369
Vishay BCcomponents
Metallized Polyester Film Capacitors
MKT Radial Potted Type
URdc = 400 V; URac = 220 V
CATALOG NUMBER 2222 369 ..... AND PACKAGING
LOOSE IN BOX
DIMENSIONS
wmax x hmax x lmax
(mm)
C
(µF)
MASS
(g)
It = 4.0 + 1.0/- 0.5 mm
REEL
It = 22.0 ± 4.0 mm
C-tol = ± 10 %
last 5 digits of
catalog number
SPQ
SPQ
SPQ
Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm
0.001
4.5 × 8.7 × 12.5
0.5
55102
2000
1000
1500
0.0012
4.5 × 9.0 × 12.5
0.5
55122
2000
1000
1500
0.0015
4.5 × 8.8 × 12.5
0.5
55152
2000
1000
1500
0.0018
4.5 × 8.7 × 12.5
0.5
55182
2000
1000
1500
0.0022
4.0 × 8.6 × 12.5
0.5
55222
2000
1000
1500
0.0027
4.3 × 8.9 × 12.5
0.5
55272
2000
1000
1500
0.0033
4.6 × 9.1 × 12.5
0.5
55332
2000
1000
1500
0.0039
4.0 × 8.7 × 12.5
0.5
55392
2000
1000
1500
0.0047
4.1 × 8.8 × 12.5
0.5
55472
2000
1000
1500
0.0056
4.6 × 9.1 × 12.5
2000
1000
1500
0.0068
55562
0.5
0.0082
0.01
55682
55822
55103
0.012
4.0 × 8.7 × 12.5
0.5
55123
2000
1000
1500
0.015
4.1 × 8.8 × 12.5
0.5
55153
2000
1000
1500
0.018
4.4 × 8.8 × 12.5
0.5
55183
2000
1000
1300
0.022
4.2 × 8.8 × 12.5
0.5
55223
2000
1000
1500
0.027
4.2 × 9.1 × 12.5
0.5
55273
2000
1000
1300
0.033
4.6 × 9.4 × 12.5
0.5
55333
2000
1000
1300
URdc = 630 V; URac = 250 V
CATALOG NUMBER 2222 369 ..... AND PACKAGING
LOOSE IN BOX
DIMENSIONS
wmax x hmax x lmax
(mm)
C
(µF)
MASS
(g)
It = 4.0 + 1.0/- 0.5 mm
REEL
It = 22.0 ± 4.0 mm
C-tol = ± 10 %
last 5 digits of
catalog number
SPQ
SPQ
SPQ
Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm
0.01
4.1 × 8.7 × 12.5
0.4
65103
2000
1000
1300
0.012
4.4 × 8.9 × 12.5
0.5
65123
2000
1000
1200
0.015
4.9 × 9.2 × 12.5
0.5
65153
2000
1000
1100
0.018
5.3 × 9.5 × 12.5
0.6
65183
2000
1000
1000
0.022
5.9 × 9.9 × 12.5
0.7
65223
2000
1000
900
www.vishay.com
4
For technical questions, contact: dc-film@vishay.com
Document Number: 28133
Revision: 20-Oct-2022
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT 369
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC).
2. The peak-to-peak voltage (UP-P) shall not be greater than 2√2 x URAC to avoid the ionization inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2
dU
dU
2 × -------- × dt < U Rdc × --------
dt rated
dt
0
T is the pulse duration.
4.
5.
6.
7.
The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor of 3 %
per K shall be applied.
The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component
temperature rise”).
Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
When using these capacitors as across-the-line capacitor in the input filter for mains applications the applicant must
guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included).
For continuous use as series connection with an impedance to the mains, please refer to application note
www.vishay.com/doc?28153.
Voltage Conditions for 6 Above
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Tamb ≤ 85 °C
85 °C < Tamb ≤ 105 °C
URAC
0.8 x URAC
Maximum temperature RMS-overvoltage (< 24 h)
1.25 x URAC
URAC
Maximum peak voltage (VO-P) (< 2 s)
1.6 x URDC
1.3 x URDC
Example
C = 3300 nF - 100 V used for the voltage signal shown in next figure.
UP-P = 80 V; UP = 70 V; T1 = 0.5 ms; T2 = 1 ms
The ambient temperature is 35 °C.
Checking conditions:
1. The peak voltage UP = 70 V is lower than 100 VDC.
2. The peak-to-peak voltage 80 V is lower than 2√2 x 63 VAC = 178 UP-P.
3. The voltage pulse slope (dU/dt) = 80 V/500 µs = 0.16 V/µs
This is lower than 8 V/µs (see “Specific Reference Data” for each version).
4. The dissipated power is 60 mW as calculated with fourier terms
The temperature rise for wmax. = 8.5 mm and pitch = 22.5 mm will be 60 mW/18 mW/°C = 3.3 °C
This is lower than 15 °C temperature rise at 35 °C, according figure “Maximum allowed component temperature rise”
5. Not applicable
6. Not applicable
7. Not applicable
Document Number: 28133
Revision: 20-Oct-2022
For technical questions, contact: dc-film@vishay.com
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKT 369
Vishay BCcomponents
Metallized Polyester Film Capacitors
MKT Radial Potted Type
Voltage Signal
Voltage
UP
UP-P
Time
T1
T2
.
www.vishay.com
6
For technical questions, contact: dc-film@vishay.com
Document Number: 28133
Revision: 20-Oct-2022
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
