Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
AC and Pulse Metallized Polypropylene Film Capacitors
MKP/MKP Radial Potted Type
FEATURES
• 15 mm to 27.5 mm pitch
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Where steep pulses occur e.g. SMPS (switch
mode power supplies)
• Motor control circuits
QUICK REFERENCE DATA
Capacitance range (E24 series)
0.002 μF to 0.68 μF
Capacitance tolerance
±5%
Climatic testing class according to IEC 60068-1
55/085/56
Rated DC temperature
85 °C
Rated AC temperature
70 °C
Maximum application temperature
85 °C
Reference specifications
IEC 60384-17
Dielectric
Polypropylene film
Electrodes
Metallized film
Construction
Internal serial construction
Encapsulation
Flame retardant plastic case and epoxy resin
(UL-class 94 V-0)
Leads
Marking
Tinned wire
C-value; tolerance; rated voltage; manufacturer’s type designation;
code for dielectric material; manufacturer’s emblem; code for factory of origin;
year and week of manufacture
Rated DC voltage
630 VDC; 1000 VDC; 1600 VDC; 2000 VDC
Rated AC voltage
300 VAC; 400 VAC; 500 VAC; 600 VAC
Rated peak-to-peak voltage
Performance grade
Stability grade
850 V; 1130 V; 1400 V; 1700 V
Grade 1 (long life)
Pitch 15 mm: grade 2
Pitch 22.5 mm and 27.5 mm: grade 1
Note
• For more detailed data and test requirements contact: dc-film@vishay.com
Revision: 13-Oct-14
Document Number: 28134
1
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
l
w
h
lt
Ø dt
P ± 0.4
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TYPE AND PITCHES
15.0 mm
378
22.5 mm
27.5 mm
0.1
2
1
3
10
4
CAPACITANCE
(numerically)
Example:
104 = 10 x 10 = 100 nF
BFC2
2222*
378
378
XX XX X
XX XX X
* Old ordering code
PREFERRED TYPES
TYPE
380
TYPE
378
Revision: 13-Oct-14
PACKAGING
Loose in box
PACKAGING
LEAD CONFIGURATION
Lead length 3.5 mm ± 0.3 mm
C-TOL.
630 V
1000 V
1600 V
2000 V
±5%
64
74
84
94
LEAD CONFIGURATION
Loose in box
Lead length 5.0 mm ± 1.0 mm
Taped on reel
H = 18.5 mm; P0 = 12.7 mm
ON REQUEST
±5%
62
72
82
92
65
75
85
95
Document Number: 28134
2
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 630 VDC
DESCRIPTION
Tangent of loss angle:
C 0.18 μF
0.2 μF C 0.3 μF
0.33 μF C 0.39 μF
0.43 μF C 0.51 μF
C > 0.51 μF
Rated voltage pulse slope (dU/dt)R:
P = 15 mm
P = 22.5 mm
P = 27.5 mm
P = 27.5 mm
R between leads, for C 1 μF; 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
Withstanding (DC) voltage between leads and case
VALUE
at 10 kHz
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
10 x 10-4
at 100 kHz
35 x 10-4
45 x 10-4
55 x 10-4
65 x 10-4
75 x 10-4
500 V/μs
370 V/μs
230 V/μs (b < 15 mm)
120 V/μs (b 15 mm)
> 100 000 M
> 100 000 M
> 400 V
1008 V; 1 min
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors” www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 378 ..... AND PACKAGING
REEL (1)
LOOSE IN BOX
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS (2)
(g)
lt = 3.5 mm ± 0.3 mm
C-TOL. = ± 5 %
LAST 5 DIGITS OF
CATALOG NUMBER
0.015
0.016
0.018
0.020
0.022
0.024
0.027
0.030
0.033
630
0.036
0.039
0.043
0.047
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.10
0.11
0.12
0.13
0.15
0.16
0.18
Revision: 13-Oct-14
ALL LEADS
H = 18.5 mm;
P0 = 12.7 mm
SPQ
SPQ
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 ± 0.06 mm; URAC = 300 V; Up-p = 850 V
64153
64163
1.0
64183
1000
64203
5.0 x 11.0 x 17.5
64223
64243
64273
1.4
1000
64303
64333
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 300 V; Up-p = 850 V
64363
1.8
64393
1000
6.0 x 12.0 x 17.5
64433
2.4
64473
1000
7.0 x 13.0 x 17.5
2.4
64513
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 300 V; Up-p = 850 V
64563
2.4
300
64623
64683
64753
6.0 x 15.5 x 26.0
2.9
200
64823
64913
3.8
64104
200
64114
7.0 x 16.5 x 26.0
3.8
64124
200
64134
64154
8.5 x 18.0 x 26.0
6.8
64164
200
64184
1100
900
800
650
600
550
450
450
350
Document Number: 28134
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 378 ..... AND PACKAGING
REEL (1)
LOOSE IN BOX
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS (2)
(g)
lt = 3.5 mm ± 0.3 mm
C-TOL. = ± 5 %
ALL LEADS
H = 18.5 mm;
P0 = 12.7 mm
SPQ
SPQ
LAST 5 DIGITS OF
CATALOG NUMBER
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 300 V; Up-p = 850 V
0.20
0.22
0.24
64204
9.0 x 19.0 x 31.5
7.4
0.27
630
64224
64274
0.30
64304
0.33
64334
0.36
11.0 x 21.0 x 31.0
9.2
64394
0.43
64434
13.0 x 23.0 x 31.0
12.3
64474
0.51
64514
0.56
64564
0.62
15.0 x 25.0 x 31.5
16.1
0.68
100
64364
0.39
0.47
100
64244
100
64624
100
64684
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
SPECIFIC REFERENCE DATA - 1000 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
C 0.051 μF
10 x 10-4
20 x 10-4
0.056 μF C 0.22 μF
10 x 10-4
25 x 10-4
Rated voltage pulse slope (dU/dt)R:
P = 15 mm
1300 V/μs
P = 22.5 mm
1200 V/μs
P = 27.5 mm
600 V/μs (b < 15 mm)
P = 27.5 mm
300 V/μs (b 15 mm)
R between leads, for C 1 μF; 500 V; 1 min
> 100 000 M
R between leads and case; 500 V; 1 min
> 100 000 M
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA)
(1);
rise time 1000 V/s
Withstanding (DC) voltage between leads and case
> 500 V
1600 V; 1 min
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors” www.vishay.com/doc?28169
Revision: 13-Oct-14
Document Number: 28134
4
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 378 ..... AND PACKAGING
REEL (1)
LOOSE IN BOX
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS
(g)
(2)
lt = 3.5 mm ± 0.3 mm
C-TOL. = ± 5 %
ALL LEADS
H = 18.5 mm;
P0 = 12.7 mm
SPQ
SPQ
LAST 5 DIGITS OF
CATALOG NUMBER
0.0030
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.010
0.011
1000
0.012
0.013
0.015
0.016
0.018
0.020
0.022
0.024
0.027
0.030
0.033
0.036
0.039
0.043
0.047
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.10
0.11
0.12
0.13
0.15
0.16
0.18
0.20
0.22
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 ± 0.06 mm; URAC = 300 V; Up-p = 1130 V
74302
74332
74362
74392
74432
1.0
1000
74472
5.0 x 11.0 x 17.5
74512
74562
74622
74682
74752
74822
74912
1.4
1000
74103
6.0 x 12.0 x 17.5
74113
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 300 V; Up-p = 1130 V
74123
74133
2.4
74153
300
74163
74183
6.0 x 15.5 x 26.0
74203
2.9
74223
200
74243
74273
74303
3.8
200
74333
74363
7.0 x 16.5 x 26.0
74393
74433
6.8
200
74473
8.5 x 18.0 x 26.0
74513
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 300 V; Up-p = 1130 V
74563
74623
9.0 x 19.0 x 31.5
7.4
74683
100
74753
74823
74913
11.0 x 21.0 x 31.5
9.2
74104
100
74114
74124
12.3
74134
100
13.0 x 23.0 x 31.0
74154
74164
74184
15.0 x 25.0 x 31.5
16.1
100
74204
18.0 x 28.0 x 31.5
74224
1100
900
600
550
450
350
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 13-Oct-14
Document Number: 28134
5
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 1600 VDC
DESCRIPTION
Tangent of loss angle:
C 0.022 μF
0.024 μF C 0.1 μF
Rated voltage pulse slope (dU/dt)R:
P = 22.5 mm
P = 27.5 mm
P = 27.5 mm
R between leads, for C 1 μF; 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
Withstanding (DC) voltage between leads and case
VALUE
at 10 kHz
10 x 10-4
10 x 10-4
at 100 kHz
15 x 10-4
20 x 10-4
1600 V/μs
900 V/μs (b < 15 mm)
450 V/μs (b 15 mm)
> 100 000 M
> 100 000 M
> 600 V
2560 V; 1 min
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors” www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 378 ..... AND PACKAGING
REEL (1)
LOOSE IN BOX
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS
(g)
(2)
lt = 3.5 mm ± 0.3 mm
C-TOL. = ± 5 %
ALL LEADS
H = 18.5 mm;
P0 = 12.7 mm
SPQ
SPQ
LAST 5 DIGITS OF
CATALOG NUMBER
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.010
0.011
0.012
0.013
0.015
0.016
0.018
0.020
0.022
1600
0.024
0.027
0.030
0.033
0.036
0.039
0.043
0.047
0.051
0.056
0.062
0.068
0.075
0.082
0.091
0.10
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 500 V; Up-p = 1400 V
84562
2.4
84622
300
84682
84752
84822
2.9
200
84912
84103
6.0 x 15.5 x 26.0
84113
84123
3.8
84133
200
84153
84163
84183
6.8
84203
200
84223
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 500 V; Up-p = 1400 V
84243
84273
7.4
84303
100
9.0 x 19.0 x 31.5
84333
84363
84393
84433
9.2
100
84473
84513
11.0 x 21.0 x 31.0
84563
12.3
84623
100
84683
84753
13.0 x 23.0 x 31.0
84823
16.1
100
84913
15.0 x 25.0 x 31.5
84104
600
550
450
350
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 13-Oct-14
Document Number: 28134
6
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 2000 VDC
DESCRIPTION
Tangent of loss angle:
C 0.051 μF
Rated voltage pulse slope (dU/dt)R:
P = 22.5 mm
P = 27.5 mm
P = 27.5 mm
R between leads, for C 1 μF; 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
Withstanding (DC) voltage between leads and case
VALUE
at 10 kHz
10 x 10-4
at 100 kHz
15 x 10-4
2000 V/μs
1200 V/μs (b < 15 mm)
600 V/μs (b 15 mm)
> 100 000 M
> 100 000 M
> 600 V
3200 V; 1 min
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors” www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 378 ..... AND PACKAGING
REEL (1)
LOOSE IN BOX
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS
(g)
(2)
lt = 3.5 mm ± 0.3 mm
C-TOL. = ± 5 %
ALL LEADS
H = 18.5 mm;
P0 = 12.7 mm
SPQ
SPQ
LAST 5 DIGITS OF
CATALOG NUMBER
2000
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
0.0091
0.010
0.011
0.012
0.013
0.015
0.016
0.018
0.020
0.022
0.024
0.027
0.030
0.033
0.036
0.039
0.043
0.047
0.051
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 600 V; Up-p = 1700 V
94332
2.4
300
94362
94392
6.0 x 12.0 x 26.0
94432
2.9
200
94472
94512
94562
94622
7.0 x 16.5 x 26.0
3.8
94682
200
94752
94822
94912
8.5 x 18.0 x 26.0
94103
6.8
200
94113
10.0 x 19.5 x 26.0
94123
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm; URAC = 600 V; Up-p = 1700 V
94133
9.0 x 19.0 x 31.5
94153
7.4
94163
100
94183
94203
11.0 x 21.0 x 31.0
94223
9.2
94243
100
94273
94303
13.0 x 23.0 x 31.0
12.3
94333
100
94363
94393
15.0 x 25.0 x 31.5
94433
16.1
100
94473
18.0 x 28.0 x 31.5
94513
600
550
450
350
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 13-Oct-14
Document Number: 28134
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not Recommended for New Designs, Use MKP385
MKP/MKP378
www.vishay.com
Vishay BCcomponents
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
103
AC voltage
(V)
102
102
nF
22 nF F
47 0 n nF
10 70
4
nF F
4.7 0 n F
1 n
47 nF
0 F
10 0 n
22
AC voltage
(V)
103
Tamb ≤ 70 °C, 630 VDC
101
103
104
105
106
f (Hz)
107
103
101
103
Tamb ≤ 70 °C, 1000 VDC
104
105
106
f (Hz)
107
106
f (Hz)
107
AC voltage
(V)
AC voltage
(V)
103
101
103
102
Tamb ≤ 70 °C, 2000 VDC
Tamb ≤ 70 °C, 1600 VDC
104
105
106
f (Hz)
107
typical
101
103
104
105
IMPEDANCE
102
1 kHz
Impedance
(Ω)
max.
C/C
(%)
CAPACITANCE
2
nF
4.7 0 nFF
1 2n F
2 7n
4
nF
10 nF F
22 7 n F
4 0n
10
102
min.
0
100
3.3 nF
10 nF
10-1
100 nF
-2
-2
10
1.0 μF
3.3 μF
- 40
Revision: 13-Oct-14
0
40
Tamb (°C)
80
10-3
104
105
106
107
f (Hz)
108
Document Number: 28134
8
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
