End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
FEATURES
• 5 mm pitch
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Low losses due to low contact resistance and low loss
dielectric make these products suitable for applications
where high currents at high frequency occur or high stability
is preferred.
QUICK REFERENCE DATA
Capacitance range (E24 series)
0.0022 μF to 0.1 μF
Capacitance tolerance
± 10 %, ± 5 %
Climatic category
55/085/56
Maximum application temperature
85 °C
Reference specifications
IEC 60384-17
Dielectric
Polypropylene film
Electrodes
Metallized film
Construction
Wound mono construction
Encapsulation
Flame retardant plastic case and epoxy resin
UL-class 94 V-0
Leads
Marking
Tinned wire
C-value; tolerance; rated voltage; manufacturer’s type designation;
code for dielectric material; manufacturer’s emblem; code for factory of origin;
year and week of manufacture
Rated DC voltage
100 VDC; 160 VDC; 250 VDC; 400 VDC; 630 VDC
Rated AC voltage
63 VAC; 100 VAC; 160 VAC; 200 VAC
Rated peak-to-peak voltage
180 V; 280 V; 450 V; 560 V
Rated temperature
85 °C
Performance grade
Grade 1 (long life)
Stability grade
Grade 2
Note
• For more detailed data and test requirements contact: dc-film@vishay.com
Revision: 04-Jan-2022
Document Number: 28136
1
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
w
l
h
lt
Ø dt
P ± 0.3
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TYPE AND PITCHES
380
5.0 mm
CAPACITANCE
(numerically)
0.1
2
1
3
10
4
Example:
104 = 10 x 10 = 100 nF
2222*
BFC2
380
380
XX XX X
XX XX X
* Old ordering code
PREFERRED TYPES
TYPE
380
TYPE
380
Revision: 04-Jan-2022
PACKAGING
Ammopack
PACKAGING
LEAD CONFIGURATION
H = 18.5 mm; P0 = 12.7 mm
C-TOL.
100 V
160 V
250 V
400 V
630 V
± 10 %
25
35
45
55
65
66
LEAD CONFIGURATION
ON REQUEST
Ammopack
H = 18.5 mm; P0 = 12.7 mm
±5%
26
36
46
56
Loose in box
Lead length
4.0 mm + 1.0 mm / - 0.5 mm
± 10 %
21
31
41
51
61
±5%
22
32
42
52
62
Document Number: 28136
2
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 100 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.018 μF ≤ C ≤ 0.027 μF
≤ 10 x 10-4
≤ 15 x 10-4
0.027 μF < C ≤ 0.075 μF
≤ 10 x 10-4
≤ 20 x 10-4
0.075 μF < C ≤ 0.1 μF
≤ 10 x
≤ 25 x 10-4
10-4
Rated voltage pulse slope (dU/dt)R at 100 V (DC)
80 V/μs
R between leads for C ≤ 1.0 μF at 100 V; 1 min
> 100 000 MΩ
R between interconnected leads and case; 100 V; 1 min
> 100 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
160 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS
(g)
(2)
AMMOPACK (1)
LOOSE IN BOX
H = 18.5 mm, P0 = 12.7 mm
lt = 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
LAST 5 DIGITS OF
CATALOG NUMBER
SPQ
SPQ
PITCH = 5.0 mm ± 0.3 mm; dt = 0.50 mm ± 0.05 mm; URAC = 63 V; Up-p = 180 V
0.018
25183
0.020
25203
0.022
25223
0.024
25243
0.027
25273
0.030
100
3.5 x 8.0 x 7.2
0.30
25303
0.033
25333
0.036
25363
0.039
25393
0.043
25433
0.047
25473
0.051
25513
0.056
25563
0.062
4.5 x 9.0 x 7.2
0.42
25683
0.075
25753
0.091
0.100
6.0 x 11.0 x 7.2
0.64
1000
2000
25623
0.068
0.082
1500
750
25823
25913
25104
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 04-Jan-2022
Document Number: 28136
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 160 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.013 μF ≤ C ≤ 0.027 μF
≤ 10 x 10-4
≤ 15 x 10-4
0.027 μF < C ≤ 0.068 μF
≤ 10 x 10-4
≤ 20 x 10-4
Rated voltage pulse slope (dU/dt)R at 160 V (DC)
80 V/μs
R between leads for C ≤ 1.0 μF at 100 V; 1 min
> 100 000 MΩ
R between interconnected leads and case; 100 V; 1 min
> 100 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
256 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS (2)
(g)
AMMOPACK (1)
LOOSE IN BOX
H = 18.5 mm, P0 = 12.7 mm
lt = 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
LAST 5 DIGITS OF
CATALOG NUMBER
SPQ
SPQ
PITCH = 5.0 mm ± 0.3 mm; dt = 0.50 mm ± 0.05 mm; URAC = 100 V; Up-p = 280 V
0.013
35133
0.015
35153
0.016
35163
0.018
35183
0.020
35203
0.022
35223
0.024
0.027
160
3.5 x 8.0 x 7.2
0.30
35243
35273
0.030
35303
0.033
35333
0.036
35363
0.039
35393
0.043
35433
0.047
35473
0.051
35513
0.056
35563
0.062
0.068
4.5 x 9.0 x 7.2
0.42
1500
35623
2000
1000
750
750
2000
35683
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 04-Jan-2022
Document Number: 28136
4
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 250 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.0091 μF ≤ C ≤ 0.027 μF
≤ 10 x 10-4
≤ 15 x 10-4
0.027 μF < C ≤ 0.043 μF
≤ 10 x 10-4
≤ 20 x 10-4
Rated voltage pulse slope (dU/dt)R at 250 V (DC)
90 V/μs
R between leads for C ≤ 1.0 μF at 100 V; 1 min
> 100 000 MΩ
R between interconnected leads and case; 100 V; 1 min
> 100 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 100 V/s
400 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS (2)
(g)
AMMOPACK (1)
LOOSE IN BOX
H = 18.5 mm, P0 = 12.7 mm
lt = 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
LAST 5 DIGITS OF
CATALOG NUMBER
SPQ
SPQ
PITCH = 5.0 mm ± 0.3 mm; dt = 0.50 mm ± 0.05 mm; URAC = 160 V; Up-p = 450 V
250
0.0091
45912
0.010
45103
0.011
45113
0.012
45123
0.013
45133
0.015
45153
0.016
45163
0.018
0.020
3.5 x 8.0 x 7.2
0.30
45203
45223
0.024
45243
0.027
45273
0.030
45303
0.033
45333
0.036
45363
0.039
45393
4.5 x 9.0 x 7.2
0.42
2000
1000
2000
750
2000
750
2000
45183
0.022
0.043
1500
45433
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 04-Jan-2022
Document Number: 28136
5
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 400 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.0043 μF ≤ C ≤ 0.0091 μF
≤ 10 x 10-4
≤ 15 x 10-4
0.0091 μF < C ≤ 0.02 μF
≤ 10 x 10-4
≤ 20 x 10-4
Rated voltage pulse slope (dU/dt)R at 400 V (DC)
100 V/μs
R between leads for C ≤ 1.0 μF at 100 V; 1 min
> 100 000 MΩ
R between interconnected leads and case; 100 V; 1 min
> 100 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 100 V/s
640 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS (2)
(g)
AMMOPACK (1)
LOOSE IN BOX
H = 18.5 mm, P0 = 12.7 mm
lt = 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
LAST 5 DIGITS OF
CATALOG NUMBER
SPQ
SPQ
PITCH = 5.0 mm ± 0.3 mm; dt = 0.50 mm ± 0.05 mm; URAC = 200 V; Up-p = 560 V
0.0043
55432
0.0047
55472
0.0051
55512
0.0056
55562
0.0062
55622
0.0068
0.0075
400
3.5 x 8.0 x 7.2
0.30
55682
55752
0.0082
55822
0.0091
55912
0.010
55103
0.011
55113
0.012
55123
0.013
55133
0.015
0.016
4.5 x 9.0 x 7.2
0.42
0.018
0.020
1500
2000
1000
55153
55163
750
55183
6.0 x 11.0 x 7.2
0.64
55203
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 04-Jan-2022
Document Number: 28136
6
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life July-2022 - Alternative Device: MKP385
MKP380
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA - 630 VDC
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.0015 μF ≤ C ≤ 0.0091 μF
≤ 10 x 10-4
≤ 15 x 10-4
0.0091 μF < C ≤ 0.01 μF
≤ 10 x 10-4
≤ 15 x 10-4
Rated voltage pulse slope (dU/dt)R at 630 V (DC)
120 V/μs
R between leads for C ≤ 1.0 μF at 500 V; 1 min
> 100 000 MΩ
R between interconnected leads and case; 500 V; 1 min
> 100 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
880 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING CODE
CATALOG NUMBER BFC2 380 ..... AND PACKAGING
URDC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
MASS
(g)
(2)
AMMOPACK (1)
LOOSE IN BOX
H = 18.5 mm, P0 = 12.7 mm
lt = 4.0 mm
+ 1.0 mm / - 0.5 mm
C-TOL. = ± 10 %
LAST 5 DIGITS OF
CATALOG NUMBER
SPQ
SPQ
PITCH = 5.0 ± 0.3 mm; dt = 0.50 ± 0.05 mm; URAC = 200 V; Up-p = 560 V
0.0022
65222
0.0024
65242
0.0027
65272
0.0030
65302
0.0033
65332
0.0036
65362
0.0039
630
3.5 x 8.0 x 7.2
0.30
65392
0.0043
65432
0.0047
65472
0.0051
65512
0.0056
65562
0.0062
65622
0.0068
65682
0.0075
65752
0.0082
0.0091
0.010
4.5 x 9.0 x 7.2
0.42
1500
65822
1000
2000
750
65912
65103
Notes
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
• SPQ = Standard Packing Quantity
Revision: 04-Jan-2022
Document Number: 28136
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
