BFC280823109

BFC2 808 ..... www.vishay.com Vishay BCcomponents Ø 5 mm Film Dielectric Trimmers FEATURES • Housing diameter 5 mm • Top and bottom or top adjustment • Round head • Mounting: radial • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Impedance matching circuits • RF • Medical • For consumer and industrial equipment QUICK REFERENCE DATA Rated DC voltage 150 VDC Test DC voltage for 1 min 300 VDC Maximum contact resistance 10 m Minimum insulation resistance Category temperature range Climatic category (IEC 60068) 10 000 M PP -40 °C to +70 °C PTFE -40 °C to +85 °C PP 40/070/21 PTFE 40/085/21 Minimum storage temperature -55 °C Related specification IEC 60418-1 and 4 Effective angle of rotation Operating torque Maximum axial thrust Capacitance range (Cmin. / Cmax.) Life of trimmer 180° (rotation in 180° only, see “Life of Trimmer”) Cmax. < 20 pF 1 mNm to 15 mNm Cmax.  20 pF 1 mNm to 25 mNm 2N 0.35 pF / 1.5 pF to 4 pF / 27 pF Maximum 10 cycles: rotation in 180° only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) Sampling and data evaluation for quality level in accordance with “MIL-STD-105D” and “IEC 60410”: Quality level < 0.15 % major defects < 0.65 % minor defects Each capacitor is tested for minimum Cmax. and is also subjected to the full test voltage. Revision: 04-Aug-15 Document Number: 28526 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters Ø 2.2 0.6 (1) 0.5 H (1) 0.4 + 0.20 0.3 + 0.10 3 ± 0.5 1.15 max. 2.2 ± 0.2 5.6 ± 0.2 W + 0.7 3 - 0.5 L 1.6 ± 0.2 5.1 ± 0.2 P 1.3 Hole pattern Trimmers BFC2 808 ..... series, with round head CAPACITANCE AND RELEVANT PHYSICAL DIMENSIONS Cmin. / Cmax. (pF) Hmax. (mm) Wmax. (mm) Lmax. (mm) 0.35 / 1.5 7.0 5.5 7.3 1.5 / 5 7.0 5.5 7.3 3 / 10 7.0 5.5 7.3 3 / 15 8.8 5.5 7.3 4 / 20 8.8 5.5 7.3 4 / 27 9.0 6.2 7.8 Revision: 04-Aug-15 Document Number: 28526 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents MOUNTING PACKAGING The trimmer has a lead pitch of 5.08 mm or 5.6 mm and can be mounted on printed-circuit boards with a minimum hole diameter of 1.25 mm. Bulk packaged in cardboard boxes lined with expanded plastic, 1000 units per box. ORDERING INFORMATION Cmin. / Cmax. (pF) TOP AND BOTTOM ADJUSTMENT (P = 5.6 mm) POLYTETRAFLUORETHYLENE 0.35 / 1.5 22158 POLYPROPYLENE 1.2 / 5 1.5 / 5 23508 1.5 / 7 3 / 10 23109 3 / 15 23159 4 / 20 23209 4 / 27 23279 CATALOG NUMBER BFC2 808 ..... TOP ADJUSTMENT ONLY (P = 5.6 mm) TOP ADJUSTMENT ONLY (P = 5.08 mm) - - 24508 24708 - 20508 20109 20159 20209 20279 ELECTRICAL DATA tan  AT Cmax. x 10-4 GUARANTEED MAX. Cmin. / MIN. Cmax. AT 200 kHz (pF) 0.35 / 1.5 1.2 / 5 1 MHz 100 MHz TEMP. COEFF. (1) (10-6/K) MIN. fres AT Cmax. (MHz) COLOR OF BASE SMALLEST PACKAGING QUANTITY  10  10 - -450 ± 550 -200 ± 550 - Grey 1000 1000 1.5 / 5  10  25 -200 ± 550 700 Grey 1000 1.5 / 7  10 - -50 ± 550 - Grey 1000 3 / 10  10  25 -250 ± 550 500 Yellow 1000 3 / 15  10  25 -250 ± 550 400 Blue 1000 4 / 20  10  25 -250 ± 400 300 Green 1000 4 / 27  10  25 -250 ± 400 300 Red 1000 CATALOG NUMBER BFC2 ... ..... .... 808 22158 .... 808 24508 .... 808 20508 .... 808 23508 .... 808 24708 .... 808 20109 .... 808 23109 .... 808 20159 .... 808 23159 .... 808 20209 .... 808 23209 .... 808 20279 .... 808 23279 Note (1) C: 60 % to 80 % of C max.; Tamb: from +20 °C to +70 °C SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE 4.2 14 IEC 60068 TEST METHOD 19 21 TEST PROCEDURE REQUIREMENTS Method of mounting Capacitance drift Method A After TC measurement Thrust Robustness of terminations: Axial thrust of 2 N C/C:  3 % for Cmax.  10 pF C/C:  2 % for Cmax. > 10 pF C/C:  0.4 % 21.1 Ua Tensile 1 N No damage 21.2 Ub Bending 1 cycle No damage Revision: 04-Aug-15 Document Number: 28526 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE 22 Na Rapid change of temperature 1 cycle; 0.5 h at lower and 0.5 h at upper category temperature C/C:  2.5 % 23 T Soldering: Ta Solderability Solder bath immersion 3 mm; 235 °C; 2 s Good wetting; no mechanical damage REQUIREMENTS Tb Resistance to heat Solder bath: 260 °C; 10 s No mechanical damage 24 Eb Impact bump 4000 ± 10 bumps; 40 g; 6 ms C/C:  1 %; no mechanical damage 25 Fc Vibration Frequency 10 Hz to 55 Hz; amplitude 0.75 mm;  1.5 h C/C:  1 %; no mechanical damage 26 C/C:  4 % Climatic sequence: 26.1 B Dry heat 16 h at upper category temperature tan  or PP and PTFE foil:  15 x 10-4 tan  for PC foil:  80 x 10-4  Rins.:  10 000 M Rotor contact R:  10 m 26.2 D Damp heat accelerated, first cycle 1 cycle; 24 h; +40 °C; 95 % to 100 % RH Voltage proof: 300 V for 1 min 26.3 Aa Cold 16 h; -40 °C Visual examination: no mechanical damage Damp heat accelerated, remaining cycles 1 cycle; 24 h; +40 °C;  95 % to 100 % RH Operating torque:  1 mNm to 20 mNm for Cmax.