BU2506-E3/51

BU2506, BU2508, BU2510 www.vishay.com Vishay General Semiconductor Enhanced isoCink+™ Bridge Rectifiers FEATURES • UL recognition file number E312394 • Thin single in-line package • Glass passivated chip junction + ~ ~ - ~ ~ + isoCink+™ Case Style BU • Superior thermal conductivity Available • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS General purpose use in AC/DC bridge full wave rectification for switching power supply, home appliances and white-goods applications. + ~ ~ - MECHANICAL DATA LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS IF(AV) 25 A VRRM 600 V, 800 V, 1000 V IFSM 300 A IR 5 μA VF at IF = 12.5 A 0.87 V TJ max. 150 °C Package BU Circuit configurations In-line Case: BU Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 and M3 suffix meet JESD 201 class 1A whisker test Polarity: as marked on body Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Average rectified forward current (Fig. 1, 2) Non-repetitive peak forward surge current 8.3 ms single sine-wave, TJ = 25 °C Rating for fusing (t < 8.3 ms) TJ = 25 °C Operating junction and storage temperature range TC = 60 °C (1) TA = 25 °C (2) SYMBOL BU2506 BU2508 BU2510 UNIT VRRM 600 800 1000 V IO 25 3.5 A IFSM 300 A I2t 373 A2s TJ, TSTG -55 to +150 °C Notes (1) With 60 W air cooled heatsink (2) Without heatsink, free air Revision: 08-Jul-2022 Document Number: 84805 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BU2506, BU2508, BU2510 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode (1) IF = 12.5 A Maximum reverse current per diode rated VR Typical junction capacitance per diode 4.0 V, 1 MHz SYMBOL TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C VF IR CJ TYP. MAX. 0.97 1.05 0.87 0.95 - 5.0 120 350 125 - UNIT V μA pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance BU2506 BU2508 RθJC (1) 2.0 RθJA (2) 20 BU2510 UNIT °C/W Notes With 60 W air cooled heatsink (2) Without heatsink, free air (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY BU2506-E3/45 4.84 45 20 DELIVERY MODE Tube BU2506-E3/51 4.84 51 250 Paper tray BU2506-M3/45 4.84 45 20 Tube Revision: 08-Jul-2022 Document Number: 84805 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BU2506, BU2508, BU2510 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise specified) 100 With Heatsink Sine-Wave, R-Load Instantaneous Forward Current ( A ) Average Forward Output Current (A) 30 25 20 15 TC TC 10 5 TC Measured at Device Bottom 0 0 40 20 60 80 120 140 0.1 TJ = 25 °C 0.2 160 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 Case Temperature (°C) Instantaneous Forward Voltage ( V ) Fig. 1 - Derating Curve Output Rectified Current Fig. 4 - Typical Forward Characteristics Per Diode 1000 Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) TJ = 125 °C 1 0.01 100 5 4 3 2 Without Heatsink Sine-Wave, R-Load Free Air, TA 1 0 TJ = 150 °C 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 0 25 50 75 100 125 150 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Forward Current Derating Curve Fig. 5 - Typical Reverse Characteristics Per Diode 1000 Junction Capacitance (pF) 50 Forward Power Dissipation (W) TJ = 150 °C 10 40 30 20 10 100 10 0 0 5 10 15 20 25 30 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 3 - Forward Power Dissipation Fig. 6 - Typical Junction Capacitance Per Diode Revision: 08-Jul-2022 Document Number: 84805 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BU2506, BU2508, BU2510 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Type BU 0.161 (4.10) 0.142 (3.60) 0.880 (22.3) 0.860 (21.8) View A 0.020R (TYP.) 0.125 (3.2) x 45° Chamfer 0.080 (2.03) 0.060 (1.52) 0.310 (7.9) 0.290 (7.4) 0.160 (4.1) 0.140 (3.5) 0.740 (18.8) 0.720 (18.3) 0.075 (1.9) R + 9° TYP. ~ ~ 0.085 (2.16) 0.065 (1.65) - 5° TYP. 0.048 (1.23) 0.039 (1.00) 0.710 (18.0) 0.690 (17.5) 0.050 (1.27) 0.040 (1.02) 0.100 (2.54) 0.085 (2.16) 0.190 (4.83) 0.210 (5.33) 0.028 (0.72) 0.020 (0.52) 0.080 (2.03) 0.065 (1.65) Polarity shown on front side of case, positive lead beveled corner 0.055 (1.385) REF. 0.094 (2.39) x 45° REF. R 0.11 (2.78) REF. 0.64 (16.28) REF. 0.62 (15.78) REF. R 0.10 (2.60) REF. 0.055 (1.385) REF. Revision: 08-Jul-2022 Document Number: 84805 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BU2506, BU2508, BU2510 www.vishay.com Vishay General Semiconductor APPLICATION NOTE 1. Device UL approved for safety use dielectric strength of 1500 V 2. If device is mounted in Floating Ground (F. G.) application, insulator is recommended to use to meet safety requirement. 3. Heat sink shape recommendation: (3) 2.5 mm MIN. Heatsink 2.5 mm MIN. By Safety Requirements Revision: 08-Jul-2022 Document Number: 84805 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000