BZX884L Series
www.vishay.com
Vishay Semiconductors
Small Signal Zener Diodes
FEATURES
• Silicon planar Zener diodes
Available
• Low leakage current, low noise
1
• Excellent stability
2
• Surge rated
• ± 2 % Zener voltage tolerance
• Leadless ultra small DFN1006-2A package
(1 mm × 0.6 mm × 0.45 mm)
MARKING (example only)
• Power dissipation better than SOT-23
• Surface-mounted device (SMD) plastic
package with visible and sidewall plated /
wettable flanks
XYY
• Soldering can be checked by standard visual inspection.
No X-ray inspection necessary to meet automotive AOI
requirements
Bar = cathode marking
X = date code
YY = type code (see page 2)
• AEC-Q101 qualified available
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D 3D
3D Models
Models
Application
Notes
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
VZ range nom.
4.7 to 47
V
Test current IZT
2; 5
mA
VZ specification
Pulse current
Circuit configuration
UNIT
Single
ORDERING INFORMATION
DEVICE NAME
BZX884BxxxL Series
ORDERING CODE
AEC-Q101 QUALIFIED
BZX884Bxxx-G3-08
no
BZX884Bxxx-HG3-08
yes
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
10 000
10 000 (8 mm tape on 7" reel)
10 000
Note
• xxx stands for any part number/voltage group, as shown in the table of page 2
PACKAGE
PACKAGE NAME
WEIGHT
MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING CONDITIONS
DFN1006-2A
0.83 mg
UL 94 V-0
MSL level 1
(according J-STD-020)
Peak temperature max. 260 °C
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
Non-repetitive peak reverse power
TEST CONDITION
SYMBOL
VALUE
UNIT
on FR-4 board with
recommended soldering footprint
Ptot
300
mW
tp = 100 μs
PZSM
26
W
Tj max.
150
°C
Storage temperature range
Tstg
-55 to +150
°C
Operating temperature range
Top
-55 to +150
°C
Maximum junction temperature
Rev. 1.3, 03-Dec-2021
Document Number: 86186
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX884L Series
www.vishay.com
Vishay Semiconductors
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air
TEST CONDITION
SYMBOL
VALUE
UNIT
according to JEDEC® 51-3 on FR-4 board with
recommended soldering footprint
RthJA
420
K/W
RthJL
100
K/W
TEST CONDITION
SYMBOL
MAX.
UNIT
IF = 10 mA
VF
0.9
V
Thermal resistance junction to lead
ELECTRICAL SPECIFICATIONS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Forward voltage
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE (1)
PART NUMBER
TYPE CODE
VZ at IZT1
TEST
CURRENT
IZT1
V
IZT2
mA
MIN.
NOM.
MAX.
REVERSE
LEAKAGE
CURRENT
IR at VR
μA
DYNAMIC
RESISTANCE
ZZ at
IZT1
αVZ at IZT1
Ω
V
MAX.
ZZK at
IZT2
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
10-4/°C
MAX.
MAX.
MIN.
MAX.
BZX884B4V7L
AK
4.61
4.7
4.79
5
1
3
2
80
500
-5
2
BZX884B5V1L
AL
5
5.1
5.2
5
1
2
2
60
480
-3
4
BZX884B5V6L
AN
5.49
5.6
5.71
5
1
1
2
40
400
-2
6
BZX884B6V2L
AO
6.08
6.2
6.32
5
1
3
4
10
150
-1
7
BZX884B6V8L
AP
6.66
6.8
6.94
5
1
2
4
15
80
2
7
BZX884B7V5L
AS
7.35
7.5
7.65
5
1
1
5
15
80
3
7
BZX884B8V2L
AT
8.04
8.2
8.36
5
1
0.7
5
15
80
4
7
BZX884B9V1L
AU
8.92
9.1
9.28
5
1
0.5
6
15
100
5
8
8
BZX884B10L
AV
9.8
10
10.2
5
1
0.2
7
20
150
5
BZX884B11L
AX
10.78
11
11.22
5
1
0.1
8
20
150
5
9
BZX884B12L
AY
11.76
12
12.24
5
1
0.1
8
25
150
6
9
BZX884B13L
A2
12.74
13
13.26
5
1
0.1
8
30
170
7
9
BZX884B15L
A3
14.7
15
15.3
5
1
0.05
10.5
30
200
7
9
BZX884B16L
A5
15.68
16
16.32
5
1
0.05
11.2
40
200
8
9.5
BZX884B18L
A9
17.64
18
18.36
5
1
0.05
12.6
45
225
8
10
BZX884B20L
BA
19.6
20
20.4
5
1
0.05
14
55
225
8
10
10
BZX884B22L
BB
21.56
22
22.44
5
1
0.05
15.4
55
250
8
BZX884B24L
BD
23.52
24
24.48
5
1
0.05
16.8
70
250
8
10
BZX884B27L
BE
26.46
27
27.54
2
0.5
0.05
18.9
80
300
8
10
10
BZX884B30L
BG
29.4
30
30.6
2
0.5
0.05
21
80
300
8
BZX884B33L
BH
32.34
33
33.66
2
0.5
0.05
23.1
80
325
8
10
BZX884B36L
BJ
35.28
36
36.72
2
0.5
0.05
25.2
90
350
8
10
BZX884B39L
BK
38.22
39
39.78
2
0.5
0.05
27.3
130
350
10
12
BZX884B43L
BL
42.14
43
43.86
2
35
0.05
30.1
150
375
10
12
BZX884B47L
BN
46.06
47
47.94
2
0.5
0.05
32.9
170
375
10
12
Notes
(1) Pulse test t = 5 ms
p
Rev. 1.3, 03-Dec-2021
Document Number: 86186
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX884L Series
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters: DFN1006-2A
Package = Chip Dimension in mm
0.5 ± 0.05
0.25 ± 0.05
0.23 ± 0.05
0.4 Ref.
0.06 Ref.
max. 0.05
0.45 ± 0.05
min. 0.1
0.6 ± 0.05
0.3 Ref.
0.04 Ref. (0.07 max.)
Orientation identification
1 ± 0.05
Footprint recommendation
1.4
0.3
0.55
0.3
0.4
Document no.: S8-V-3906.04-059 (4)
Created - Date: 11-Jul-2018
Rev.5 - Date: 17-Sep-2021
23191
Rev. 1.3, 03-Dec-2021
Document Number: 86186
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BZX884L Series
www.vishay.com
Vishay Semiconductors
CARRIER TAPE DFN1006-2A
max.
5°
1.15 ±0.05
Ø 0.4 ±0.1
Section
0.18 ±0.02
+ 0.3
8 - 0.1
2 ±0.05
A
3.5 ±0.05
+0.1
Ø 1.5 0.0
1.75 ±0.1
A-A
4 ±0.1
B
B
2 ±0.05
A
+ 0.05
0.55 - 0.03
B-B
S8-V-3906.04-063 (4)
created 28.10.2019
+ 0.05
0.55 - 0.03
Section
max. 5°
+ 0.06
0.66 - 0.02
OHMS
SQ
Cummulative tolerances of 10 sprocket holes is ± 0.2 mm
surface resistance: 105 - 1011
ORIENTATION IN CARRIER TAPE DFN1006-2A
Unreeling direction
Cathode marking
S8-V-3906.04-064 (4)
created 28.10.2019
Top view
Rev. 1.3, 03-Dec-2021
Document Number: 86186
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Document Number: 91000
1
For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 01-Jan-2024
