CA0001R3000JS73

End of Life July 2020 CA High Volume www.vishay.com Vishay Dale Wirewound Resistors, Commercial Power, Axial Lead FEATURES • High performance for low cost • Auto insertable • High temperature coating for environmental protection • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Kitchen appliances: • Percolators, blenders, mixers, ranges, toasters, deep fryers Entertainment and consumer devices: • Radios, televisions • Computers and power supplies STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P25 °C W RESISTANCE RANGE (1)  TOLERANCE ±% WEIGHT (typical) g CA0001 1.0 0.1 to 1K 5, 10 0.65 CA0002 2.0 0.1 to 1K 5, 10 0.80 GLOBAL MODEL Note (1) E24 decade values are available, although others may be available upon request TECHNICAL SPECIFICATIONS PARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS ppm/°C ± 350 Short Time Overload - 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Dielectric Withstanding Voltage VAC 350 Operating Temperature Range °C -65 to +275 Terminal Strength (Minimum) lb 10 Temperature Coefficient GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CA000150R00JE66 C A 0 0 0 1 5 0 R 0 0 J E 6 6 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical Specifications table / Global Model column for options) R = decimal K = thousand R1500 = 0.15  1K000 = 1000  J = ± 5.0 % K = ± 10.0 % E66 = lead (Pb)-free, tape/reel (Dash number) (Up to 3 digits) From 1 to 999 as applicable Revision: 05-Feb-2020 Document Number: 30114 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life July 2020 CA High Volume www.vishay.com Vishay Dale DIMENSIONS DIMENSIONS in inches [millimeters] GLOBAL MODEL LL L L ± 0.040 [1.0] D ± 0.020 [0.5] LD ± 0.002 [0.05] LL ± 0.079 [2.0] CA0001 0.354 [9] 0.138 [3.5] 0.024 [0.6] 1.024 [26] CA0002 0.453 [11.5] 0.177 [4.5] 0.031 [0.8] 1.378 [35] LD D Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: ceramic Coating: special high temperature material Terminals: tin plated copper End Caps: tin plated steel RATED POWER IN % DERATING MATERIAL SPECIFICATIONS 120 100 80 60 Part Marking: E24 color bands 40 20 0 -55 -25 75 25 125 175 225 275 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -55 °C to +275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (1.0 % + 0.05 ) R Dielectric Withstanding Voltage 350 VAC for 1 min ± (2.0 % + 0.05 ) R Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R Humidity 75 °C, 90 % - 100 % RH, 240 h ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R Terminal Strength 10 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (1.0 % + 0.05 ) R Revision: 05-Feb-2020 Document Number: 30114 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000