CA00023R900JB14

CA Vishay Dale Wirewound Resistors, Commercial Power, Axial Lead FEATURES • High performance for low cost • Auto insertable • CA0001, CA0002 and CA5000 models are supplied with a high temperature silicone coating for additional environmental protection • Lead forming available • Compliant to RoHS Directive 2002/95/EC APPLICATIONS Kitchen appliances: Percolators, blenders, mixers, ranges, toasters, deep fryers. Entertainment devices: Radios, televisions, computers and power supplies. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL (1) HISTORICAL MODEL (1) POWER RATING P25 °C W 1.0 2.0 2.0 to 8.8 2.5 to 11.0 RESISTANCE RANGE  0.1 to 1K 0.1 to 2.4K 0.1 to 1.02K 0.1 to 7K TOLERANCE ±% 5, 10 5, 10 5, 10 5, 10 WEIGHT (typical) g 0.65 0.80 See below See below POWER RATING P25 °C W 2.0/2.5 2.2/2.75 2.4/3.0 2.8/3.5 3.2/4.0 3.6/4.5 4.0/5.0 6.0/7.5 8.0/10.0 8.8/11.0 RESISTANCE RANGE  0.1 to 170/0.1 to 2.7K 0.1 to 195/0.1 to 3.1K 0.1 to 220/0.1 to 3.5K 0.1 to 270/0.1 to 4.3K 0.1 to 320/0.1 to 5.1K 0.1 to 370/0.1 to 5.9K 0.15 to 420/0.15 to 6.7K 0.2 to 630/0.2 to 7K 0.2 to 920/0.2 to 7K 0.2 to 1.02K/0.2 to 7K TOLERANCE ±% 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 WEIGHT (typical) g 0.64/0.78 0.65/0.80 0.66/0.82 0.68/0.86 0.70/0.90 0.72/0.94 0.74/0.98 0.84/1.19 0.94/1.40 0.98/1.48 CA0001 CA-1 CA0002 CA-2 CA4000 CA-4xxx CA5000 CA-5xxx Note (1) CA4000 and CA5000 model numbers are calculated from the CA4000 power rating of 4 W per inch and CA5000 power rating of 5 W per inch. The last three digits of the model number are the body length of the resistor in inches (decimal is between the first and second digit). Example: CA5150 = 1.50 inches x 5 W per inch = 7.5 W. EXAMPLES GLOBAL MODEL HISTORICAL MODEL CA4050/CA5050 CA4055/CA5055 CA4060/CA5060 CA4070/CA5070 CA4080/CA5080 CA4090/CA5090 CA4100/CA5100 CA4150/CA5150 CA4200/CA5200 CA4220/CA5220 CA-4050/CA-5050 CA-4055/CA-5055 CA-4060/CA-5060 CA-4070/CA-5070 CA-4080/CA-5080 CA-4090/CA-5090 CA-4100/CA-5100 CA-4150/CA-5150 CA-4200/CA-5200 CA-4220/CA-5220 TECHNICAL SPECIFICATIONS PARAMETER UNIT CA RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C ± 300 1  and above, ± 600 below 1  Short Time Overload 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Dielectric Withstanding Voltage VAC 600 (CA0001, CA0002 and CA5xxx only) Operating Temperature Range °C - 65 to + 275 Terminal Strength (minimum) lb 10 Note • Wirewound CA resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and resistive functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using the e-mail address at the bottom of this page for design assistance. GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CA000150R00JR05 C A 0 0 0 1 5 0 R 0 0 J R 0 GLOBAL MODEL VALUE TOLERANCE PACKAGING (See Standard R = Decimal H = ± 3.0 % E14 = Lead (Pb)-free bulk Electrical Specifications K = Thousand J = ± 5.0 % E05 = Lead (Pb)-free tape and reel Global Model R1500 = 0.15  K = ± 10.0 % B14 = Tin/lead bulk column for options) 1K500 = 1500  R05 = Tin/lead tape and reel Historical Part Numbering example: CA-1 50  5 % R05 CA-1 50  5% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 30214 Revision: 14-Feb-11 For technical questions, contact: ww2aresistors@vishay.com 5 SPECIAL (Dash Number) (up to 3 digits) From 1 to 999 as applicable R05 PACKAGING www.vishay.com 1 CA Wirewound Resistors, Commercial Power, Axial Lead Vishay Dale DIMENSIONS in inches [millimeters] [1.625 ± 0.125] (1) 41.28 ± 3.15 Figure 1 [1.625 ± 0.125] (1) 41.28 ± 3.15 A C A' B A A' Figure 2 B C Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown. A ± 0.031 [0.794] 0.400 [10.16] 0.570 [14.48] 0.500 [12.70] 0.550 [13.97] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.00 [25.40] 1.50 [38.10] 2.00 [50.80] 2.20 [55.88] 0.500 [12.70] 0.550 [13.97] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.00 [25.40] 1.50 [38.10] 2.00 [50.80] 2.20 [55.88] A’ (MAXIMUM) 0.460 [11.68] 0.630 [16.00] 0.594 [15.09] 0.644 [16.36] 0.694 [17.63] 0.794 [20.17] 0.894 [22.71] 0.994 [25.25] 1.094 [27.79] 1.594 [40.49] 2.094 [53.19] 2.294 [58.27] 0.625 [15.88] 0.675 [17.15] 0.725 [18.42] 0.825 [20.96] 0.925 [23.50] 1.025 [26.04] 1.125 [28.58] 1.625 [41.28] 2.125 [53.98] 2.325 [59.06] DIMENSIONS in inches [millimeters] B ± 0.001 [0.025] C 0.032 [0.813] 0.170 maximum [4.32 maximum] 0.032 [0.813] 0.170 maximum [4.32 maximum] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.032 [0.813] 0.140 ± 0.031 [3.56 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] 0.036 [0.914] 0.170 ± 0.031 [4.32 ± 0.794] MATERIAL SPECIFICATIONS DERATING Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Woven fiberglass Coating: Special high temperature silicone (CA4000 series is not coated) Terminals: Tin/lead electroplated copper (lead (Pb)-free will be 100 % tin) End Caps: Tin plated steel Part Marking: CA0001 and CA0002 are printed with value and tolerance RATED POWER IN % GLOBAL MODEL CA0001 CA0002 CA4050 CA4055 CA4060 CA4070 CA4080 CA4090 CA4100 CA4150 CA4200 CA4220 CA5050 CA5055 CA5060 CA5070 CA5080 CA5090 CA5100 CA5150 CA5200 CA5220 FIGURE 2 2 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 120 100 80 60 40 20 0 - 65 - 25 75 25 125 175 225 275 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage Humidity Load Life Terminal Strength Resistance to Solder Heat www.vishay.com 2 CONDITIONS OF TEST - 55 °C to + 275 °C, 5 cycles, 30 min dwell time 5 x rated power for 5 s 600 VAC for 1 min (CA0001, CA0002 and CA5xxx only) - 65 °C, full rated working voltage for 45 min 75 °C, 90 % to 100 % RH, 240 h 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” 10 pounds for 30 s; body twisted about axis, 3 x 360° rotations Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body For technical questions, contact: ww2aresistors@vishay.com TEST LIMITS (EIA RS-344) ± (5.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (3.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R ± (10.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R Document Number: 30214 Revision: 14-Feb-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000