CDMA50M0F6000FE5

CDMA www.vishay.com Vishay Techno Thick Film Chip Dividers, Medium Voltage FEATURES • AEC-Q200 qualified • Voltage up to 1415 V Available • Maximum resistance ratio of 500:1 • Flow solderable • Tape and reel packaging available • Termination termination style: 3-sided wraparound • Termination material: solder-coated nickel barrier • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Footprints STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CASE SIZE POWER RATING P70 °C W MAXIMUM WORKING VOLTAGE (1) V RESISTANCE RANGE (2)  TOLERANCE (3) ±% TCR TRACKING (-55 °C to +155 °C) ± ppm/°C 2512 1 1415 500K to 50M 0.5, 1, 2, 5, 10 10 to 50 CDMA 2512 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (2) Resistance values are calibrated at 100 V . Calibration at other voltages available upon request DC (3) Contact factory for tighter tolerances VOLTAGE COEFFICIENTS AND RATIO TRACKING INFORMATION (Typical) RESISTANCE () RATIO (MAXIMUM) RATIO TRACKING (ppm/°C) -55 °C to +155 °C VCR (ppm/V) 500K 100:1 -10 ±20 15M 50M 250:1 500:1 -10 -10 ±10 -50 to 0 Note • Contact factory for other ratios GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CDMA20K0J1000GEB (preferred part number format) C D M A 2 0 K GLOBAL MODEL RESISTANCE VALUE (R1) TOLERANCE CDMA = CDMA2512 K = k M = M 20K0 = 20 k 800K = 800 k 1M00 = 1 M D = ± 0.5 % F=±1% G=±2% J=±5% K = ± 10 % 0 J 1 0 0 0 G RATIO (R1 + R2) / R2 RATIO TOLERANCE SOLDER TERMINATION 3 digit significant figure, followed by a multiplier 1000 = 100:1 2000 = 200:1 D = ± 0.5 % F=±1% G=±2% H=±3% J=±5% E = Sn100 E B PACKAGING SPECIAL B = bulk (250 pcs max.) F=T/R (full reel) 1=T/R (1000 pcs) 5=T/R (500 pcs) T=T/R (250 pcs min.) W= waffle tray Note • For additional information on packaging, refer to the “Surface-Mount Resistor Packaging” document (www.vishay.com/doc?31543) Revision: 10-Jun-2021 Document Number: 68049 1 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CDMA www.vishay.com Vishay Techno MATERIAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Resistive element Operating temperature Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina -55 °C to +155 °C Less than 0.5 % change when tested at full rated power Life Termination Solder-coated nickel barrier terminations standard Solder finish Pure tin or tin Note • Reference only: not for all values specified. Consult factory for your size and value DIMENSIONS in inches (millimeters) B B L L A A C C T T W B A Style A B W A B C A E W Style A Bottom (3-sided wraparound) TERMINATION LENGTH (L) ± 0.006 (0.152) WIDTH (W) ± 0.006 (0.152) THICKNESS (T) ± 0.005 (0.127) A ± 0.005 B ± 0.005 C ± 0.005 E ± 0.010 0.250 0.126 0.025 0.025 0.025 0.040 0.046 Style A  (3-sided wraparound) DERATING CURVE Axis Title 10000 120 1000 80 1st line 2nd line 2nd line Rated Power (%) 100 60 100 40 20 10 0 -55 -25 0 25 50 70 100 125 155 175 Ambient Temperature (°C) Note • Reference only: not for all values specified. Consult factory for your specific value Revision: 10-Jun-2021 Document Number: 68049 2 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CDMA www.vishay.com TYPE Solderable Vishay Techno TERMINATION MATERIAL TERMINATION STYLE TERMINATION STYLE / MATERIAL CODE SOLDER TERMINATION CODE Nickel barrier 3-sided (wraparound) AF E or T SCHEMATIC Pin 2 R2 R1 R1 1 Pin 3 VIN 2 3 R2 VOUT 2 Pin 1 Revision: 10-Jun-2021 Document Number: 68049 3 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000