CDR01BX332BKURAJ

V i shay Intertechnology, Inc . AND TEC O L OGY INNOVAT I N HN Multilayer Ceramic Chip Capacitors CDR O 19 62-2012 Capacitors - Military Established Reliability Multilayer Ceramic Chip Capacitor MIL-PRF-55681 Key Benefits • • • • • Broad capacitance range: 1.0 pF to 0.47 µF Voltages: 50 WVDC and 100 WVDC Military established reliability failure rates: M, P, R and S Federal stock control number, CAGE CODE SHV71 Available in ten military packages: CDR01, CDR02, CDR03, CDR04, CDR06, CDR31, CDR32, CDR33, CDR34, CDR35 • Wet build process with reliable Noble Metal Electrode (NME) system • Tin/lead (min. 4 % lead) termination finish available. Termination codes “Z” and “U” • Lead (Pb)-free termination codes “W”, “Y” and “M” APPLICATIONS • • • • • • Military and high-reliability designs Avionic systems Sonar systems Satellite systems Geographical information systems Global positioning systems Resources • Datasheet: CDR - http://www.vishay.com/doc?45026 • For technical questions contact mlcc@vishay.com • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 Note One of the World’s Largest Manufacturers of (1) Pb containing terminations are not RoHS compliant, exemptions may apply PRODUCT SHEET Discrete Semiconductors and Passive Components 1/2 VMN-PT9142-1206 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BP • Very - typical of 0.65 mm 100 low profile F 220 p height F 270 p CDR02 (1805) TM BX CDR02 (1805) 100 3.9 nF 22 nF CDR-MIL-PRF-55681 eSMP Series • Ideal for automated placement New Product BP CDR03 (1808) 100 F 330 p F 1.0 n V i shay Intertechnology, Inc . Vishay BX CDR03 (1808)Vitramon 100 12 nF drop, low power 68 nF • Low forward voltage MSS1P5 BP CDR04 (1812) & MSS1P6 100 1.2 nF 3.3 D TE losses ANnF C www.vishay.com Surface Mount Multilayer Ceramic Chip Capacitors BX CDR04 (1812) 100 39 nF Vishay General Semiconductor • High efficiency BX CDR06 (2225) 50 F 390 n MIL Qualified, Type CDR N O 180 nF CDR31 (0805) BP CDR32 (1206) • Federal stock control number, BX CDR32 (1206) CAGE CODE SHV71 MSS1P5 & CDR33 MSS1P6 BP Chip Capacitors (1210) Surface Mount Multilayer Ceramic I INNOVAT Bottom View 100 F 1.0 p F 680 p 100 F 470 p F 18 n 100 F 1.0 p F 2.2 n 1 9 3922-A111 100 F 4.7 n 10 s, F n • Solder dip 265 °C max. per JESD 62-2012 FEATURES • High reliability tested per MIL-PRF-55681 100 1.0 nF 3.3 nF BX CDR33 (1210) 100 15 nF Vishay General Semiconductor MIL Qualified, Type CDR • Tin/lead termination codes “Z” and “U” • Very low profile -Chip typical heightCapacitors, of 0.65 mm accordance to WEEE 2002/96/EC Multilayer Ceramic BP CDR34 (1812) 100 2.2 nF • Compliant to RoHS directive 2002/95/EC and in 100 nF 10 nF • Lead (Pb)-free termination codes “W”, “Y”, “M” PRIMARY CHARACTERISTICS eSMP TM Series Qualified, Surface Mount Schottky Barrier Rectifiers O L OGY BP Top View HN Multilayer Ceramic Chip Capacitors CDR-MIL-PRF-55681 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Vishay Vitramon CDR FEATURES BX Barrier Rectifiers CDR31 (0805) Surface MicroSMP NewMount Product Schottky www.vishay.com • Military qualified products F 470 n Type CDR BX• Ideal for automated placement CDR34 (1812) FEATURES • Wet build process 100 F 27 n F n • Halogen-free according to IEC 180 61249-2-21 I 1.0 A BP CDR35 (1825) 100 F 4.7 n F 22 n •F(AV) Military qualified products • Low forward voltage drop, low power definition • Reliable Noble Metal Electrode (NME) system BX CDR35 100 F 56 n F 470 n V 50 V, 60 V (1825) • RRM Federal stock control number, • Compliant to RoHS Directive 2011/65/EU losses CAGENote CODE SHV71 IFSM 25 A61249-2-21 definition •• Halogen-free to chart IEC Detail ratingsaccording see selection • High efficiency reliability tested per MIL-PRF-55681 Note VF at•IFHigh = 1.0 A 0.52 V MECHANICAL DATA FEATURES * Pb are not“U” RoHS compliant, exemptions • Tin/lead termination codes “Z” and Bottom View • containing Meetsterminations MSL level 1,°C per- J-STD-020, LF Case: maximum ORDERING INFORMATION Vishay Vitramon T max. may apply MicroSMP • Very low profile - typical height of150 0.65 mmMILITARY J • Lead (Pb)-free termination codes “W”, “Y”, “M” MicroSMP peak of BX 260 °C CDR31 102 A K Y S A T Molding compound meets UL 94 V-0 flammability APPLICATIONS • Wet build process • Ideal for automated placement Capacitors - Military Established Reliability CDR-MIL-PRF-55681 y.com Top View TM eSMP Series Mount Multilayer Ceramic Chip Capacitors • MIL Qualified, Type CDR Top View MILITARY DIELECTRIC CAPACITANCE DC CAPACITANCE TERMINATION FAILURE •Note Tin/lead codes “Z” and “U” VF at IFtermination = 1.0 A 0.52 V• • Avionic systems CDR34 102 = 1000 pF PACKAGING U = Hot solder Polarity: Color band denotes the cathode end dipped MECHANICAL DATA Solder dip 265CDR35 °C max. 10 s, per JESD 22-A111 1R8 = 1.8 pF • Sonar systems Electrical characteristics at codes + 25 °C“W”, unless otherwise specified •• Lead termination “Y”, T(Pb)-free 150 °C“M” (min. of 4 % lead) (3) Case: MicroSMP J max. • Compliant to systems RoHS directive 2002/95/EC and in • Satellite •Operating Wet buildTemperature: process Aging Rate: compound meets UL 94 V-0 flammability - 55 °C to + 125 °C Molding • Missiles accordance toapplications WEEE 2002/96/EC • Reliable Noble Metal Electrode (NME) system MAXIMUM RATINGS (TA = °C unless otherwise noted) BP: rating 0 % maximum per25 decade PRIMARY CHARACTERISTICS Capacitance Range: 1.0 pF to 470 nF • Geographical information BX: 1 % maximum persystems decade • Compliant to RoHS Directive 2011/65/EU • Halogen-free according tohalogen-free IEC 61249-2-21 PARAMETER MSS1P5 Base P/N-M3 and RoHS SYMBOL compliant, IF(AV) 1.0 A • Global positioning systems •Voltage Halogen-free to IEC Range: according 50 VDC to 100 VDC61249-2-21 definition definition Insulation Resistance (IR): TYPICAL APPLICATIONS commercial grade Device marking code 15 V 50 V, 60 V RRM MARKING • Solder dip 265 °CNOMINAL max. 10 s, per JESD 22-A111 • Avionic rating (2) STYLE RATE • Reliable Noblesystems Metal Electrode (NME) system VOLTAGE TOLERANCE Low forward voltage drop, 2011/65/EU low CODE power RATING (1) • Sonar systems • Compliant RoHS Directive • toCompliant to RoHS directive 2002/95/EC andP/N-M3 in Base - halogen-free and RoHS compliant, losses Halogen-free • Satellite systems CDR01 A= BP andto BXIEC Expressed in definition A = 50 V C = ± 0.25 pF M = Silver Palladium M = 1.0 % according 61249-2-21 accordance to WEEE 2002/96/EC TYPICAL •APPLICATIONS FEATURES CDR02 applications Unmarked picofarads (pF). B = 100 V D commercial = ± 0.5 pF Y =grade Ni barrier with P = 0.1 % PRIMARY CHARACTERISTICS Note • Missiles CDR03 The first two F=±1% 100 % tin R = 0.01 % Highin efficiency • Military qualified products For• use low voltage high frequency inverters, • Halogen-free according to IEC 61249-2-21 * Pb containing are not systems RoHS exemptions JTerminals: • Geographical information CDR04terminations digitscompliant, are =±5% W =Matte Ni barrier tin with plated S = 0.001leads, % IF(AV) 1.0 A solderable per • Federal stock control number, apply CDR06 significant, thepolarity K = ± 10 % 100 % tin Consult freewheeling, maydc-to-dc converters, and definition Bottom View Global positioning systems LF 50 V, 60•V Meets MSL• level JESD CDR311, per J-STD-020, third is a maximum MJ-STD-002 = ± 20 % Z and = Ni barrier with22-B102 RRM SHV71 factory for CAGEVCODE protection CDR32 multiplier. tin/lead plate MicroSMP I failure rate APPLICATIONS peak applications. of 260 °C M3 suffix meets class 1A whisker test 25 A •ELECTRICAL High reliability tested per MIL-PRF-55681 SPECIFICATIONS FSM CDR33 Examples: min. 4 JESD % lead 201 status Note ELECTRICAL SPECIFICATIONS Capacitance (TCC): inverters, For Temperature use in lowCoefficient voltageofare high frequency * Pb containing terminations not RoHS compliant, exemptions At + 25 °C and rated voltage 100 000 M minimum or T = 7" reel/plastic tape J = 7" reel (low quantity) C = 7" reel/paper tape R = 11 1/4"/13" reel/plastic tape P = 11 1/4"/13" MSS1P6 reel/paper UNIT tape B = Bulk 16 Maximum repetitive Notes peak reverse voltage VRRM per 50 60 Terminals: 1000 F, whicheverMatte is less tin plated leads, solderable (1) DC apply ± 30 ppm/°C from - 55 °C to + 125 °C, Note freewheeling, voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. BP:may 0 ppm/°C dc-to-dc converters, and polarity rectified current (fig. 1) IF(AV) 1.0 Consult for questions: mlcc@vishay.com J-STD-002 and JESD 22-B102 VF at IF = 1.0• AElectrical characteristics 0.52 at +V25 °C unless otherwiseMaximum specifiedaverage forward MECHANICAL DATA with 0 VDC applied www.vishay.com IFSM 25 A TJ max. protection applications. APPLICATIONS Dielectric Strength Test: (2) Available tolerances please see rating chart M3 suffix meets JESD 201 class 1A whisker test Peak forward surgePerformed current 8.3 single half (3) Case: MicroSMP MIL-PRF-55681 “U” termination part number have increased dimensions perms method 103 ofsine-wave EIA-198-2-E. IFSM Aging Rate: superimposed on rated load DC Applied test voltages: Polarity: Color band denotes the cathode end Molding BP: compound meets UL% of94rated V-0 flammability 0% maximum per 250 decade • Sonar systems  100 V -rated: voltage DC DIMENSIONS in inches (millimeters) BX: Range: + 15 %,1.0 - 25 55 °C to + 125 °C,Operating junction and storage temperature range TJ, TSTG Capacitance pF%tofrom 470-nF rating BX: 1 % maximum per decade • Satellite systems with 100 % rated VDC applied Revision: 29-Feb-12 2 VoltageMAXIMUM Range: 50 Vapplications to 100 VDC (T = 25 °C unless • Missiles DCRATINGS Baseotherwise P/N-M3 - halogen-free Insulation Resistance (IR): and RoHS compliant, noted) BX: ± 15 % from150 - 55°C °C to + 125 °C, Operating•Temperature: - 55 °C to + 125 °C Avionic with 0systems V applied Dissipation Factor (DF): V CDR-MIL-PRF-55681 A Vishay Vitramon 25 A - 55 to + 150 °C Document Number: 45026 W For technical L questions, contact: mlcc@vishay.com A • Geographical information systems THIS DOCUMENT IS SUBJECT CHANGE WITHOUT TYPICAL APPLICATIONS At +grade 25 °C and rated voltage 100 000TO M minimum or NOTICE. commercial PARAMETER SYMBOL MSS1P5 MSS1P6 UNIT THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Temperature of Capacitance (TCC): BP: Coefficient 0.15 % maximum T •BX: Global positioning systems 1000 F, whichever is less ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2.50 maximum For use in low BP: voltage high frequency 0 ppm/°C ± 30 % ppm/°C from -inverters, 55 °C to + 125 °C, Device marking code 15 16 MAX. Terminals: Matte tin plated leads, solderable per Test frequency: with 0 Vconverters, DC applied freewheeling, dc-to-dc Dielectric Strength Maximum repetitive reverse voltage  1000 pF VRRM Test: 50 60 V CATIONS 1 MHz ± 50 peak kHzand for BP polarity capacitors J-STD-002 JESD 22-B102 P Newand Product BX: ± 15 % from - for 55 BX °C forward to + 125 °C, and capacitors  100current pF protection applications. per method 103 of EIA-198-2-E. Maximum average rectified (fig. 1) M3 suffixPerformed IF(AV) 1.0 test A meets JESD 201 class 1A whisker with 0 VDCAll applied other BP and BX at 1 kHz ± 50 Hz Applied test voltages: MSS1P5 & MSS1P6 t + 25 °C unless otherwise specified LENGTH WIDTH MAXIMUM Peak forward surge current 8.3 ms single half sine-wave 100 VDC -rated: 250 % of STYLE ratedcathode voltage25 end MIL-PRF-55681 A IFSM Polarity:Color band denotes the BX: + 15 %, - 25 % from - 55load °C to + 125 °C, (L) (W) THICKNESS (T) superimposed on rated Aging Rate:VDC applied 5 °C to + 125 °C with 100 % rated CDR01 - 0.080 ± ± 0.38) 0.050 0.055 (1.40) Revision: 29-Feb-12 Number: 45026 55 to Document + 0.015 150 (2.03 °C± 0.015 (1.27 ± 0.38) Operating junction and storage temperature range TJ, TSTG 1 BP: 0% maximum per decade to 470 nF For technical questions, contact: mlcc@vishay.com Document Number: 89018 For technical your±region, please contact of the following: Dissipation Factor (DF): CDR02questions 0.180 ± within 0.015 (4.57 0.38) 0.050 ± 0.015 (1.27one ± 0.38) 0.055 (1.40) BX: 1 % maximum per decade /1 MAXIMUM RATINGS (TATHIS = DOCUMENT 25 °C unless otherwise noted) IS SUBJECT TO CHANGE WITHOUT16-Jun-09 NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Revision: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com BP: 0.15 % maximum CDR03 0.180 ± 0.015 (4.57 ± 0.38) 0.080 ± 0.015 (2.03 ± 0.38) 0.080 (2.03) ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0 VDC Insulation BX: 2.50 % maximumResistance (IR): PARAMETER SYMBOL MSS1P5 MSS1P6 UNIT CDR04 0.180 ± 0.015 (4.57 ± 0.38) 0.125 ± 0.015 (3.20 ± 0.38) 0.080 (2.03) ELECTRICAL = 25 °C Test frequency: At + 25 °C andCHARACTERISTICS rated voltage 100 000 M(T minimum or unless otherwise noted) A Capacitance (TCC): Device marking code 16 /315 CDR06 0.225 ± 0.020 (5.72 ± 0.51) 0.250 ± 0.020 (6.35 ± 0.51) 0.080 (2.03) 1 MHz ± 50F, kHzwhichever for BP capacitors 1000 is less  1000 pF TEST CONDITIONS PARAMETER SYMBOL TYP. MAX. UNIT rom - 55 °C to + 125 °C, peakand /750 CDR31 0.078 ± 0.008V(2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.051 (1.30) for BXvoltage capacitors  100 pF Maximum repetitive reverse VRRM 60 0.45 IF = 0.5 A Dielectric Test: All other BP and Strength BX at 1 kHz ± 50 Hz /8 CDR32 0.125 ± 0.008A(3.20 ± 0.20) 0.062 ± 0.008 (1.60 ± 0.20) 0.051 (1.30) TJ = 25 °C Maximum average forward rectified current (fig. 1) IF(AV) 1.0 = 1.0 A I 0.56 0.68 F Maximum instantaneous + 125 °C, Performed per method 103 of EIA-198-2-E. /9 VF CDR33 0.125 ± 0.010 (3.20 ± 0.25) 0.098V± 0.010 (2.50 ± 0.25) 0.059 (1.50) (1) forward voltage Peak forward surge current 8.3 ms single sine-wave Applied test half voltages: IF = 0.5 A I 0.40 25 /10 CDR34 0.176 ± 0.010A(4.50 ± 0.25) 0.125 ± 0.010 (3.20 ± 0.25) 0.059 (1.50) TJ = 125 °C FSM superimposed on rated load29-Feb-12 IF = 1.0 A 0.52 Document Number: 0.60 45026  100 VDC-rated: 250 % of rated voltage Revision: www.vishay.com 1 5 °C to + 125 °C, Vishay General Semiconductor MAXIMUM 0.010 (0.25) 0.030 (0.75) 0.010 (0.25) www.vishay.com 0.030 (0.75) 0.010 (0.25) 0.030 (0.75) 0.010 (0.25) 0.030 (0.75) 0.010 (0.25) 0.030 (0.75) 0.012 (0.30) 0.028 (0.70) 0.012 (0.30) 0.028 (0.70) 1 0.010 (0.25) 0.030 (0.75) CDR-MIL-PRF-55681 /11 CDR35 0.176 ± 0.012 (4.50 ± 0.30) For technical questions, contact: mlcc@vishay.com pplied Operating junction and storage Document Number: 89018 For technical questions your region, please one of 20 the following: °C TTSTG - 55contact to + 150 temperature range TJ, within 150 J = 25 °C Maximum reverse current (2)TO IR Rated VRNOTICE. THIS DOCUMENT IS SUBJECT CHANGE WITHOUT THE DESCRIBED HEREIN Revision: 16-Jun-09 PDD-Americas@vishay.com, PDD-Europe@vishay.com 125 PRODUCTS °C TJ =PDD-Asia@vishay.com, 7.0AND THIS DOCUMENT 12 J SET FORTH AT www.vishay.com/doc?91000 ARE SUBJECT TO SPECIFIC DISCLAIMERS, QUICK REFERENCE DATA Typical junction capacitance Revision 29-Feb-12 capacitors  1000 pF 100 pF kHz ± 50 Hz TERM. (P) MINIMUM 4.0 V, 1 MHz Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms 40 in inches (millimeters) “U” CTERMINATION J BX CDR31 BP CDR32 to CDR35 CDR01 (0805) 0.023 (0.60) 100 CDR02 (1805) 0.023 (0.60) 100 CDR02 (1805) 100 CDR03 (1808) 100 MIL-C-55681 QUALIFIED, TYPE CDR SYMBOL MSS1P5 MSS1P6 BX MILITARY TYPE For technical questions, contact: mlcc@vishay.com BP Document Number: 89018 For technical questions within your region, please contact one ofDESIGNATION theRθJA following: JECT TO CHANGE WITHOUT NOTICE.Typical THE PRODUCTS DESCRIBED AND THIS DOCUMENT PDD-Europe@vishay.com (1) HEREIN Revision: 16-Jun-09 PDD-Americas@vishay.com, PDD-Asia@vishay.com, thermal resistance BX RθJL UBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 pF LENGTH MAXIMUM VOLTAGE WIDTH/THICKNESS STYLE (CASE) (V) MINIMUM 0.020 (0.51) 0.015 (0.38) CDR01 (0805) 100 F 0.025 (0.64) 0.015 (0.38) 10 p BX Document Number: 45026 CDR01BP R BX θJC CDR01BP100B_ __ 40 CDR06 100 (2225) 10 50 BP CDR32 (1206) 100 CDR01BP220B_ _ _ 220 22 BX CDR32 (1206) 100 CDR01BP270BJ_ _ 270 27 BP CDR33 (1210) 100 CDR01BP330B_ _ _ 330 33 ORDERING INFORMATION (Example) BX CDR33 100 CDR01BP390BJ_ _ 390 (1210) 39 PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGECDR01BP470B_ CODE BASE DELIVERY MODE BP 100 _ _QUANTITY CDR34 470 (1812) 47 CDR01BP560BJ_ _ 4500 560 56 and100 BX CDR34 (1812) plastic tape MSS1P6-M3/89A 0.006 89A 7" diameter reel CDR01BP680B_ __ 680 (1825) 68 BP CDR35 100 CDR01BP820BJ_ _ 820 (1825) 82 BX CDR35 100 CDR01BP101B_ _ _ 101 100 Note CDR01BP121B_ _ _ 121 120 • Detail ratings see selection chart CDR01BP151B_ _ _ 151 150 RATINGS AND CHARACTERISTICS CURVES CDR01BP181B_ _ _ 181 180 (TA = 25 °C unless otherwise noted) A ORDERING INFORMATION - MILITARY 2/2 F 0.012 (0.30) 120 p F 0.012 (0.30) 220 p 3.9 nF F 330 p UNIT CDR03 (1808) 100 CAPACITANCE CAPACITANCE CAPACITANCE CDR04 (1812) 100 www.vishay.com 125 CODE (pF) TOLERANCE 1 30 °C/W CDR04 (1812) 100 Note BP CDR31 100 CDR01BP120BJ_ _ 120 (0805) 12 (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 6.0 mm x 6.0 mm copper pad areas R θJL CDR01BP150B_ __ 150 (0805) 15 is measured BX CDR31 100 body at the terminal of cathode band. RθJC is measured at the top center of the CDR01BP180BJ_ _ 180 18 PRODUCT SHEET 0.059 (1.50) STYLE DIELECTRIC CDR01 BP CDR02 to CDR06 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BP 1PARAMETER 0.250 ± 0.012 (6.40 ± 0.30) www.vishay.com µA 1 mA 0.010 (0.25) 0.030 (0.75) Vishay Vitramon 0.032 (0.80) 0.008 (0.20) CAPACITANCE PACKAGING CODES MAXIMUM “C”, “J”, “P”, “B” F “T”, “J”, 180 “R”,p“B” F “C”, “J”, 4.7 “P”,n“B” F “T”, “J”, 270 “R”,p“B” 22 nF F 1.0 n 12 nF 68 nF RATED TEMP. AND VOLTAGE 1.2 nF 3.3 nF VOLTAGE TEMP. LIMITS (DC) 39 nF 180 nF F 390 n J, K F 1.0 p J J, K F 470 p J F 1.0 p J, K F 4.7 n J 1.0 nF J, K 15 nF J 2.2 nF J, K J F 27 n J, K F 4.7 n J F 56 n J, K J, K J, K J, K F 470 n BP F 680 p BP BP F 18 n BP F 2.2 n BP F 39 n BP 3.3 nF BP 100 nF BP 100 100 100 100 100 100 100 100 10 nF 100 BP BP F 180 n 100 BP F 22 n 100 BP F 470 n 100 BP 100 BP 100 BP 100 BP 100 VMN-PT9142-1206 CDR31 BX 102 A K Y S A T Revision: 29-Feb-12 Document Number: 45026 3 0.7 MILITARY DIELECTRIC CAPACITANCED For DCD = 0.8questions, CAPACITANCE TERMINATION FAILURE MARKING PACKAGING = 0.5technical contact: mlcc@vishay.com D = 0.3 Resistive or Inductive Load STYLE NOMINAL VOLTAGE TOLERANCE (2) RATE THIS0.6 DOCUMENT IS D SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT (1) RATING = 0.2CODE 1.0 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO CDR01 0.5 BP and BX A= Expressed in A = 50 V C = ± 0.25 pF M = Silver Palladium M = 1.0 % D = 0.1 CDR02 Unmarked picofarads (pF). B = 100 V D =D1.0= ± 0.5 pF Y = Ni barrier with SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0.8 P = 0.1 % CDR03 The first two F=±1% 100 % tin R = 0.01 % 0.4 CDR04 digits are J=±5% W = Ni barrier with S = 0.001 % 0.6 wer Loss (W) ectified Current (A) 1.2